WTB S13 dash connector pigtail - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Mildviolence · 04-07-2015, 07:31 PM

I am in need of the dash connector for a s13 dohc (Hooks up to engine harness, next to ECU). really only need a the connector and pigtail. Will consider whole dash harness if you have it.

This is what connector will look like.

kennn · 04-08-2015, 06:47 AM

I have one.

kruked · 04-08-2015, 08:13 AM

$11 shipped. Male and female plugs.

TwelveAM · 04-08-2015, 10:15 AM

If my car was originally SOHC (two tone) and I swapped out the whole engine with a DOHC, do I need the SOHC (white one) or can I use the DOHC (brown one) on the SOHC dash harness?

kennn · 04-08-2015, 10:22 AM

Quote:

Originally Posted by TwelveAM

If my car was originally SOHC (two tone) and I swapped out the whole engine with a DOHC, do I need the SOHC (white one) or can I use the DOHC (brown one) on the SOHC dash harness?

Without hacking up either the dash or engine harness, you need both connectors to make your own patch harness.

kruked · 04-08-2015, 10:30 AM

Quote:

Originally Posted by TwelveAM

If my car was originally SOHC (two tone) and I swapped out the whole engine with a DOHC, do I need the SOHC (white one) or can I use the DOHC (brown one) on the SOHC dash harness?

Use the DOHC engine harness. Buy the female brown plug for the dash harness. De-pin the white plug, re-pin the brown plug.

There is plenty of information on the interwebs, and a few videos on YouTube for what wires are a must.

jdm_rydaa · 04-08-2015, 02:11 PM

Just wired mine up , I have an sohc car and put a dohc in it. I just cut the brown plug off the engine harness and wired the white one up to it , I have another white plug if you need it.

Sent from my iPhone using Tapatalk

04-07-2015, 07:31 PM	#1
Mildviolence Leaky Injector Join Date: Nov 2013 Location: Iowa Posts: 139 Trader Rating: (3) Feedback Score: 3 reviews	WTB S13 dash connector pigtail I am in need of the dash connector for a s13 dohc (Hooks up to engine harness, next to ECU). really only need a the connector and pigtail. Will consider whole dash harness if you have it. This is what connector will look like.

04-08-2015, 08:13 AM	#3
kruked Nissanaholic! Join Date: Feb 2012 Location: Clearwater, Fl. Posts: 2,293 Trader Rating: (37) Feedback Score: 37 reviews	$11 shipped. Male and female plugs. __________________ S13 coupe, KA-t

04-08-2015, 02:11 PM	#7
jdm_rydaa Zilvia Member Join Date: Apr 2011 Location: texas Posts: 162 Trader Rating: (3) Feedback Score: 3 reviews	Just wired mine up , I have an sohc car and put a dohc in it. I just cut the brown plug off the engine harness and wired the white one up to it , I have another white plug if you need it. Sent from my iPhone using Tapatalk __________________ *Live Life Sideways*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-08-2015, 06:47 AM	#2
kennn Zilvia Member Join Date: Mar 2011 Location: USA Posts: 254 Trader Rating: (17) Feedback Score: 17 reviews	I have one.

04-08-2015, 10:15 AM	#4
TwelveAM Nissanaholic! Join Date: Feb 2010 Location: SoCal Posts: 1,933 Trader Rating: (26) Feedback Score: 26 reviews	If my car was originally SOHC (two tone) and I swapped out the whole engine with a DOHC, do I need the SOHC (white one) or can I use the DOHC (brown one) on the SOHC dash harness?