DIY fmic intercooler piping easy sample ? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

R3cK · 07-23-2015, 08:52 AM

hey guys,

looking for an easy way to build a sample piping for my fmic setup.
i want 2.5" aluminium piping and my welder needs some kind of sample that he can recreate in my specs.

so im looking for all kinds of flexible pipes or something i can easily bend to create smooth corners and short ways.

at the moment i got some universal piping i cut down with several samco hoses that i dont like.

is there an easy way to build a sample for my welder.
or do i have to wield something up with cut down universal steel pipes (which i dont like at all)

cheers

jr_ss · 07-23-2015, 09:11 AM

They make kits that can be snapped together to mock up for fitment so you can layout your piping. They even have angles marked on the pipe so you can replicate it exactly rather than guessing.

Kingtal0n · 07-23-2015, 01:16 PM

I used to weld these kits up for our swaps when we did two or three swaps a week. Usually just use your eyes, mark the U-bend, make a cut. I never had a problem eye-balling it, there is plenty of room for plus or minus.

07-23-2015, 08:52 AM	#1
R3cK Zilvia Member Join Date: Nov 2011 Location: bavaria Posts: 159 Trader Rating: (0) Feedback Score: 0 reviews	DIY fmic intercooler piping easy sample ? hey guys, looking for an easy way to build a sample piping for my fmic setup. i want 2.5" aluminium piping and my welder needs some kind of sample that he can recreate in my specs. so im looking for all kinds of flexible pipes or something i can easily bend to create smooth corners and short ways. at the moment i got some universal piping i cut down with several samco hoses that i dont like. is there an easy way to build a sample for my welder. or do i have to wield something up with cut down universal steel pipes (which i dont like at all) cheers

07-23-2015, 09:11 AM	#2
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,415 Trader Rating: (35) Feedback Score: 35 reviews	They make kits that can be snapped together to mock up for fitment so you can layout your piping. They even have angles marked on the pipe so you can replicate it exactly rather than guessing. __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-23-2015, 01:16 PM	#3
Kingtal0n Post Whore! Join Date: Jul 2005 Location: South Florida Age: 42 Posts: 4,829 Trader Rating: (17) Feedback Score: 17 reviews	I used to weld these kits up for our swaps when we did two or three swaps a week. Usually just use your eyes, mark the U-bend, make a cut. I never had a problem eye-balling it, there is plenty of room for plus or minus.