SR Help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ibanezxguy · 09-05-2004, 02:15 PM

My s13 sr has oil coated all in my intake pipes all over the place. But the car isnt loosing oil nor burning it. Its pretty much all factory. How do i find the problem and fix it. Thanks

sr240mike · 09-05-2004, 06:51 PM

Your turbo oil seals are leaking.

ibanezxguy · 09-05-2004, 08:43 PM

yup great news, i started taking everything off to install my new exhaust manifold, finally got it off after about 4hrs of work, those banjo bolts SUCK. If anybody has any info to get them back on. Ill take any ideas. But now i need another i pulled my turbo out unbolted it and checked if for shaft play, well no shaft play but the fins dont spin, i was forcing 120psi from a compress in there and only got it to spin once. gotta love only having your sr for 3 weeks then finding out your turbo is shot and its not an exhaust leak causing the problem. Well if anybody near GA has a turbo t25/t28 anything that will bolt right up please let me know. Im on a tight bugdet, im still trying to get a fuel pump, for the car

09-05-2004, 02:15 PM	#1
ibanezxguy Zilvia Member Join Date: May 2002 Location: Augusta,Ga Posts: 176 Trader Rating: (0) Feedback Score: 0 reviews	SR Help My s13 sr has oil coated all in my intake pipes all over the place. But the car isnt loosing oil nor burning it. Its pretty much all factory. How do i find the problem and fix it. Thanks

09-05-2004, 06:51 PM	#2
sr240mike Zilvia FREAK! Join Date: Apr 2004 Location: California, Norcal biiaatch Posts: 1,185 Trader Rating: (0) Feedback Score: 0 reviews	Your turbo oil seals are leaking. __________________ TWO IN THE COOT, ONE IN THE POOT

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-05-2004, 08:43 PM	#3
ibanezxguy Zilvia Member Join Date: May 2002 Location: Augusta,Ga Posts: 176 Trader Rating: (0) Feedback Score: 0 reviews	yup great news, i started taking everything off to install my new exhaust manifold, finally got it off after about 4hrs of work, those banjo bolts SUCK. If anybody has any info to get them back on. Ill take any ideas. But now i need another i pulled my turbo out unbolted it and checked if for shaft play, well no shaft play but the fins dont spin, i was forcing 120psi from a compress in there and only got it to spin once. gotta love only having your sr for 3 weeks then finding out your turbo is shot and its not an exhaust leak causing the problem. Well if anybody near GA has a turbo t25/t28 anything that will bolt right up please let me know. Im on a tight bugdet, im still trying to get a fuel pump, for the car