iso: ka-t build guide

[92silviavert]

searching for help to make a parts list and write up for a stock internals, low boost ka-t setup but looking to safely and inexpensively maximize the stock internals. #9139091119 text me if your looking to help

[KAT-PWR]

No thank you

[brndck]

Originally Posted by 92silviavert

searching for help to make a parts list and write up for a stock internals, low boost ka-t setup but looking to safely and inexpensively maximize the stock internals. #9139091119 text me if your looking to help

how about YOU do some RESEARCH instead of just expecting people to hold your hand. its really fucking simple.

[pinkyrang]

Ka-t.org has tons of info; fuel management is the most important aspect to a turbo ka, there are plenty of low boost possibilities to have fun with before u build the motor (forged rods and Pistons) . Know your motor and how well it runs, also check compression, oil consumption (if any), and overall good functionality of ur motor, and go from there. It is possible to make power with cheap ka set-ups, but not always practical or reliable; so find your goal(s) and stick to em. Thorough knowledge of the ka24de engine in its factory form Is an essential basis for any turbo charged application. Good luck with build,. spend 6 hours of research time for every hour of "build" time and you will be A okay

[Cnet15]

http://www.ka-t.org/viewtopic.php?f=12&t=6263

[hongpast]

spend 6 hours of research time for every hour of "build" time and you will be A okay