Need help with push button start install - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

millerchamp · 08-10-2017, 09:04 PM

Ok so i have the steering covers off exposed the key tumbler housing and wires to the ignition. There are 6 wires. Black/green, White/Red, Red, Blue, Black/white, and Black/yellow. Now i know that the Black/Yellow is the starter wire. But what are the other 5. I have looked every where and can not find a solid answer. Even the wire diagrams are not telling me, or im not reading them right. All i need to know is what wire is what. 12V constant/ ACC/ On start ready, and start. that is all that i need to know here is a picture of the back of the key tumbler.

mechanicalmoron · 08-10-2017, 11:12 PM

I feel like it says on the switch...

Why a push-button?

millerchamp · 08-13-2017, 08:34 PM

i had my stolen or lost not sure. So instead of paying 130 USD for a new tumbler and matching keys i payed 30 USD and install a few securtiy switches and main switch.

millerchamp · 08-13-2017, 08:39 PM

Update, i have a friend that has a test light that can send power to grounds by connecting directly to the battery with the test light device that has clamps. Touched all the 6 wires on the back of the key tumbler. and sent power to all the grounds found out that the red blue and black/ white wires needed to be connected together as those are the ACC main On/ Dashlights then the black/Yellow wire ran the starter. Kinda funny forgot to take it out of gear and thank god i put the E-Brake on the starter tryed to pull the car haha. i have a video that i will post soon of what i did for install. Took me 5 hours to wire every thing up and drill holes for switches.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-10-2017, 11:12 PM	#2
mechanicalmoron Zilvia FREAK! Join Date: Jul 2013 Location: tx Posts: 1,078 Trader Rating: (0) Feedback Score: 0 reviews	I feel like it says on the switch... Why a push-button?

08-13-2017, 08:34 PM	#3
millerchamp Join Date: Mar 2017 Location: Kentucky Age: 33 Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	i had my stolen or lost not sure. So instead of paying 130 USD for a new tumbler and matching keys i payed 30 USD and install a few securtiy switches and main switch.

08-13-2017, 08:39 PM	#4
millerchamp Join Date: Mar 2017 Location: Kentucky Age: 33 Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	Update, i have a friend that has a test light that can send power to grounds by connecting directly to the battery with the test light device that has clamps. Touched all the 6 wires on the back of the key tumbler. and sent power to all the grounds found out that the red blue and black/ white wires needed to be connected together as those are the ACC main On/ Dashlights then the black/Yellow wire ran the starter. Kinda funny forgot to take it out of gear and thank god i put the E-Brake on the starter tryed to pull the car haha. i have a video that i will post soon of what i did for install. Took me 5 hours to wire every thing up and drill holes for switches.