MN Cammed LS6 T56 Swapped S14 with S15 front clip $11,500 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Jakes32guitar · 08-07-2018, 09:30 AM

Selling my 240, was a project car over winter for me and my wife and I are trying to get a down payment together for a lake lot so selling a few things. This car is a ton of fun and runs and drives great as is. Many good quality parts were used and it is very fast, this is not a drift car, I wanted a street/strip car. I am located in Zimmerman Minnesota, see my craigslist for more details.

https://minneapolis.craigslist.org/c...660103737.html

Sergio180sx · 08-07-2018, 10:28 AM

Wrong section but great price!!

Jakes32guitar · 08-07-2018, 11:20 AM

thanks! I posted it in cars for sale now.

afishysilvia · 08-07-2018, 12:12 PM

I didn’t think metal fenders fit straight on, are these welded to s14 fenders to like up?

Jakes32guitar · 08-07-2018, 12:59 PM

There was some modification required and I believe holes drilled to make them work, the front clip fitment is not perfect but does look good. I got the car with the body and paint already done.

afishysilvia · 08-07-2018, 01:24 PM

Quote:

Originally Posted by Jakes32guitar

There was some modification required and I believe holes drilled to make them work, the front clip fitment is not perfect but does look good. I got the car with the body and paint already done.

Cool thanks for the insight, seems like a decent swap. Any internal work done or just heads? Also what swap kit was used?

Jakes32guitar · 08-07-2018, 01:28 PM

Ground crank with new oem bearings on the mains, rods and cam. Otherwise its all stock LS6 parts besides the cam and springs. Makes very good power. I used the GTO oil pan with Hooker mounts and headers and a wiring specialties harness. Driveshaft is a custom shaft rated for 1k hp.

Jakes32guitar · 08-14-2018, 03:10 PM

bump to the top

08-07-2018, 12:12 PM	#4
afishysilvia Post Whore! Join Date: Jan 2010 Location: Cali Posts: 3,411 Trader Rating: (31) Rides Gallery: afishysilvia Feedback Score: 31 reviews	I didn’t think metal fenders fit straight on, are these welded to s14 fenders to like up? __________________ Dont be a pussy...Leave your name

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-07-2018, 11:20 AM	#3
Jakes32guitar Join Date: Nov 2017 Location: Minnesota Age: 34 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	thanks! I posted it in cars for sale now.

08-07-2018, 12:59 PM	#5
Jakes32guitar Join Date: Nov 2017 Location: Minnesota Age: 34 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	There was some modification required and I believe holes drilled to make them work, the front clip fitment is not perfect but does look good. I got the car with the body and paint already done.

08-07-2018, 01:28 PM	#7
Jakes32guitar Join Date: Nov 2017 Location: Minnesota Age: 34 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	Ground crank with new oem bearings on the mains, rods and cam. Otherwise its all stock LS6 parts besides the cam and springs. Makes very good power. I used the GTO oil pan with Hooker mounts and headers and a wiring specialties harness. Driveshaft is a custom shaft rated for 1k hp.

08-14-2018, 03:10 PM	#8
Jakes32guitar Join Date: Nov 2017 Location: Minnesota Age: 34 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	bump to the top