|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series. |
|
|
Thread Tools | Display Modes |
06-18-2020, 01:05 PM
|
#1 |
|
SR20DET Valve Guide to Valve clearance
Hello everyone,
I need your experience about the clearance of the valve guide to valve. Now i change the old ones into new BC Racing and set the correct high as well. The factory tolerance for intake side is 0,02-0,053mm and exhaust side 0,04-0,073mm Now i set 0,03mm for intake and 0,04mm for exhaust side. But at the moment iam not shure if the clearance ist right for racetrack application and around 450hp. By the way, i build a complete new engine for racetrack use. Can you help me with good experiance from your build,please.  thx a lot Dominik |
|
|
|
| Sponsored Links |
| Bookmarks |
| Tags |
| built, sr20 blacktop, valve clearance. |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode