Replacing bushings in rear hub. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

nocturnaldrifter · 12-03-2004, 06:16 PM

I recently purchased a set of bushings from energy suspension for the rear on my s13. There are 5 bushings on each side (3 go in the hub and 2 in the lower control arm). I have seen the install on pdmracing on how to do this and it looks like a bitch. Anyone here done this install before, I was wondering if a 42 ton press is sufficient to get those old bushings out. My car only has 90k so I'm going to check if I should even bother replacing them at this point. Any comments are appreciated.

12-03-2004, 06:16 PM	#1
nocturnaldrifter Zilvia Member Join Date: Apr 2004 Location: Westchester (In LA), CA Age: 37 Posts: 169 Trader Rating: (0) Feedback Score: 0 reviews	Replacing bushings in rear hub. I recently purchased a set of bushings from energy suspension for the rear on my s13. There are 5 bushings on each side (3 go in the hub and 2 in the lower control arm). I have seen the install on pdmracing on how to do this and it looks like a bitch. Anyone here done this install before, I was wondering if a 42 ton press is sufficient to get those old bushings out. My car only has 90k so I'm going to check if I should even bother replacing them at this point. Any comments are appreciated. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode