Need help with clutch installation - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

atlsupra · 04-09-2005, 08:42 PM

Well, I am changing clutch for the first time. I searched everwhere and pretty much followed instructions on FSM and a page on
http://www.240sx.org/links/installs/flywheel/index.htm

Right now I am stuck. I unbolt all the bolts around the transmission and I can get the transmission pulled back about 2-3" (hit the chasis already) but tranmission main shaft still stuck and won't come out the hole. Do I have to pull it out in a certain angle? Also, I thought the clutch and flywheel suppose to come off with the transmission case , but they are stick to the wall. Any suggestions on what should I do now? Thanks in advance.

04-09-2005, 08:42 PM	#1
atlsupra Leaky Injector Join Date: Feb 2005 Location: Atlanta, GA Posts: 102 Trader Rating: (0) Feedback Score: 0 reviews	Need help with clutch installation Well, I am changing clutch for the first time. I searched everwhere and pretty much followed instructions on FSM and a page on http://www.240sx.org/links/installs/flywheel/index.htm Right now I am stuck. I unbolt all the bolts around the transmission and I can get the transmission pulled back about 2-3" (hit the chasis already) but tranmission main shaft still stuck and won't come out the hole. Do I have to pull it out in a certain angle? Also, I thought the clutch and flywheel suppose to come off with the transmission case , but they are stick to the wall. Any suggestions on what should I do now? Thanks in advance.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode