Locating CONSULT connector - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

edwin240sx · 03-31-2002, 04:18 PM

Hi,

I bought a used 95 nissan 240sx se and used it on a road trip. In the middle of the journey, the Check Engine lights went on :-<

Being a starving student, I decide to do the check myself. I went on the web and found two ways to read the computer codes - to read off the ECU behind the right passenger kick panel or to connect the pins on the CONSULT connector which is located on the driver side's fuse box. I got the second method from an Australian website, and it seems easier.

Does anyone has experience locating the CONSULT connector, specifically where are the pins?

Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

03-31-2002, 04:18 PM	#1
edwin240sx Join Date: Mar 2002 Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	Hi, I bought a used 95 nissan 240sx se and used it on a road trip. In the middle of the journey, the Check Engine lights went on :-< Being a starving student, I decide to do the check myself. I went on the web and found two ways to read the computer codes - to read off the ECU behind the right passenger kick panel or to connect the pins on the CONSULT connector which is located on the driver side's fuse box. I got the second method from an Australian website, and it seems easier. Does anyone has experience locating the CONSULT connector, specifically where are the pins? Thanks