My new custom front lip - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

silviaz · 04-25-2005, 12:58 PM

What do you think about it ? It's custom my friend

The front bumper will looks 2.5" lower.

Flybert · 04-25-2005, 01:02 PM

What sucks about it is that you have to be using stock 4x4 suspension with that custom lip of yours to actually clear the ground. On my car, the way you have it fitted, it wouldn't have a chance to fit in between the ground and bumper.

silviaz · 04-25-2005, 01:08 PM

Quote:

Originally Posted by Flybert

What sucks about it is that you have to be using stock 4x4 suspension with that custom lip of yours to actually clear the ground. On my car, the way you have it fitted, it wouldn't have a chance to fit in between the ground and bumper.

Yup I knew that. I don't have the money right now for the coilovers, so it will do the job for this summer. Next big thing before the suspension are the mags and my new interior.

Thanks for your comment.

A Spec Products · 04-25-2005, 01:14 PM

Quote:

Originally Posted by Flybert

What sucks about it is that you have to be using stock 4x4 suspension with that custom lip of yours to actually clear the ground. On my car, the way you have it fitted, it wouldn't have a chance to fit in between the ground and bumper.

true story, i'd be squashing that thing if it was on my car. zenki lip is already fingers off the ground.

pretty clean looking though, what's it made out of?

imo you should've made it wrap around the bottom edge (put in higher like zenki lip) and made it come out wider.

anthony240 · 04-25-2005, 01:16 PM

LOL
I haven't heard anyone use the term "mags" in years!! haha
what kind of material is that made of? and custom DIY or you had it made?

s13gonwild · 04-25-2005, 01:21 PM

did you cut up a pignose lip and make it fit LOL?

silviaz · 04-25-2005, 01:22 PM

It's made of plastic but very flexible. We moulded the lip with a high temperature gun.

silviaz · 04-25-2005, 01:24 PM

Quote:

Originally Posted by s13gonwild

did you cut up a pignose lip and make it fit LOL?

I cutted the lip in two pieces and i'll do the joint tonight. We'll paint the front bumper and make sure the joint is perfect after that.

Before it was looking like that:

[IMG]

[/IMG]

vvtisupra · 04-25-2005, 01:50 PM

yah if that was on my car Hulk SMASH

this is zenki lip and it looks half the size of yours and yes that is a lug nut. Couldn;t even clear it

scrape 1

Scrape 2

Scrape 3

silviaz · 04-25-2005, 02:17 PM

How low is your suspension ?

HyperTek · 04-25-2005, 02:22 PM

pretty damm low... RIP Zenki lip

silviaz · 04-25-2005, 02:25 PM

Thanks to Hypertek who gave me the idea to change my original front lip hahah

I just felt in love with this picture

Stock-S13 · 04-25-2005, 03:04 PM

Damn here i thought you and Bing or whatever crazy canuck got together and knocked off the Zenki Lip.

I really wish someone would do that and price them moderatley, I don't care I scrape my oem bumper at times and wouldn't mind buying 2-3 lips. Im not a fan of that Homedepot nonsense....

silviaz · 04-25-2005, 03:43 PM

Quote:

Originally Posted by Stock-S13

Damn here i thought you and Bing or whatever crazy canuck got together and knocked off the Zenki Lip.

I really wish someone would do that and price them moderatley, I don't care I scrape my oem bumper at times and wouldn't mind buying 2-3 lips. Im not a fan of that Homedepot nonsense....

Are you calling my front lip "homedepot nonsense" ?

Originaly, it was a pickup truck lip and sometimes, like an engine mods, you need to make custom work to make it fit well.
In my region, zenki lip are damn rare and pricy too... My father told me we could do something nice like this and we just did it

I'm very happy with the final result, this is what i wanted too.

**ThatGuy** · 04-25-2005, 03:50 PM

No he's talking about "Home Depot SPL" garden edging lips that look like ass. Calm down.

silviaz · 04-25-2005, 03:54 PM

Quote:

Originally Posted by ThatGuy

No he's talking about "Home Depot SPL" garden edging lips that look like ass. Calm down.

LOL are you serious ? Sorry for the inconvenience
I'm driving a Nissan 240SX, not a Honda Civic

I'll show you some pictures when the bumper will be painted. I just can't wait.

kandyflip445 · 04-25-2005, 04:11 PM

Looks nice.

Dousan_PG · 04-25-2005, 04:13 PM

Quote:

Originally Posted by silviaz

Thanks to Hypertek who gave me the idea to change my original front lip hahah

I just felt in love with this picture

hehehe my old car

rip buddy
and burgundy crap

i got it lower later
thats way too high
good times w/ that car

anyways, that lip you made cool for lcustom stuff...but
zenki lip 4life

bing · 04-25-2005, 04:56 PM

Quote:

Originally Posted by Stock-S13

Damn here i thought you and Bing or whatever crazy canuck got together and knocked off the Zenki Lip.

Je suis Famous!!!

what the deal here? should i be flattered or start throwing e-punches?

ZK · 04-25-2005, 05:45 PM

Quote:

Originally Posted by silviaz

LOL are you serious ? Sorry for the inconvenience
I'm driving a Nissan 240SX, not a Honda Civic

I'll show you some pictures when the bumper will be painted. I just can't wait.

You will not clear anything with that lip if your car is lowered at all.

DRFT · 04-25-2005, 05:55 PM

i hope you made the lip to extend to the fender pieces too...if not its gonna look even more out of place

Stock-S13 · 04-25-2005, 10:39 PM

Take it whatever way induces motivation for said project. Come on I have money, REAL MONEY, American money, none of that Canuck monoploy money you guys use as currency...

Quote:

Originally Posted by bing

Je suis Famous!!!

what the deal here? should i be flattered or start throwing e-punches?

wootwoot · 04-26-2005, 02:30 PM

Quote:

Originally Posted by Stock-S13

Take it whatever way induces motivation for said project. Come on I have money, REAL MONEY, American money, none of that Canuck monoploy money you guys use as currency...

You do know the American dollar is currently a joke right?

bing · 04-26-2005, 03:41 PM

Quote:

Originally Posted by Stock-S13

Take it whatever way induces motivation for said project. Come on I have money, REAL MONEY, American money, none of that Canuck monoploy money you guys use as currency...

jah?

you make no sense at all but at least you sound extremely arrogant and for no gain whatsoever.

it is also quite likely that i have more american money than you do.

congadulations for meaningless posts that only hurt your image / rep.

bye bye

raen419 · 04-26-2005, 03:58 PM

money sucks when you don't have it.

04-25-2005, 12:58 PM	#1
silviaz Zilvia Junkie Join Date: Jan 2005 Location: Beverly Hills Posts: 365 Trader Rating: (0) Feedback Score: 0 reviews	My new custom front lip What do you think about it ? It's custom my friend The front bumper will looks 2.5" lower. __________________ Nissan 240SX LE 1992 SR20DET Redtop

04-25-2005, 01:16 PM	#5
anthony240 Zilvia FREAK! Join Date: Jun 2001 Location: Norcal Age: 43 Posts: 1,234 Trader Rating: (4) Feedback Score: 4 reviews	LOL I haven't heard anyone use the term "mags" in years!! haha what kind of material is that made of? and custom DIY or you had it made? __________________ 18+ to come//21+ to swallow

04-25-2005, 01:22 PM	#7
silviaz Zilvia Junkie Join Date: Jan 2005 Location: Beverly Hills Posts: 365 Trader Rating: (0) Feedback Score: 0 reviews	It's made of plastic but very flexible. We moulded the lip with a high temperature gun. __________________ Nissan 240SX LE 1992 SR20DET Redtop

04-25-2005, 01:50 PM	#9
vvtisupra Nissanaholic! Join Date: Apr 2004 Location: SB and OC Posts: 2,118 Trader Rating: (16) Feedback Score: 16 reviews	yah if that was on my car Hulk SMASH this is zenki lip and it looks half the size of yours and yes that is a lug nut. Couldn;t even clear it scrape 1 Scrape 2 Scrape 3 __________________ http://www.fuckdrama.com/

04-25-2005, 02:17 PM	#10
silviaz Zilvia Junkie Join Date: Jan 2005 Location: Beverly Hills Posts: 365 Trader Rating: (0) Feedback Score: 0 reviews	How low is your suspension ? __________________ Nissan 240SX LE 1992 SR20DET Redtop

04-25-2005, 01:02 PM	#2
Flybert Post Whore! Join Date: Mar 2003 Location: none Posts: 3,862 Trader Rating: (7) Feedback Score: 7 reviews	What sucks about it is that you have to be using stock 4x4 suspension with that custom lip of yours to actually clear the ground. On my car, the way you have it fitted, it wouldn't have a chance to fit in between the ground and bumper.

04-25-2005, 01:21 PM	#6
s13gonwild BANNED Join Date: Jan 2005 Location: cali Posts: 466 Trader Rating: (0) Feedback Score: 0 reviews	did you cut up a pignose lip and make it fit LOL?

04-25-2005, 02:22 PM	#11
HyperTek Post Whore! Join Date: Mar 2003 Location: Cali Posts: 13,224 Trader Rating: (3) Feedback Score: 3 reviews	pretty damm low... RIP Zenki lip __________________ Keep it Classy

04-25-2005, 02:25 PM	#12
silviaz Zilvia Junkie Join Date: Jan 2005 Location: Beverly Hills Posts: 365 Trader Rating: (0) Feedback Score: 0 reviews	Thanks to Hypertek who gave me the idea to change my original front lip hahah I just felt in love with this picture __________________ Nissan 240SX LE 1992 SR20DET Redtop

04-25-2005, 03:04 PM	#13
Stock-S13 BANNED Join Date: Mar 2003 Location: so. cal Age: 39 Posts: 306 Trader Rating: (0) Feedback Score: 0 reviews	Damn here i thought you and Bing or whatever crazy canuck got together and knocked off the Zenki Lip. I really wish someone would do that and price them moderatley, I don't care I scrape my oem bumper at times and wouldn't mind buying 2-3 lips. Im not a fan of that Homedepot nonsense....

04-25-2005, 03:50 PM	#15
ThatGuy Admin Asshole Join Date: Mar 2002 Location: Retired Age: 45 Posts: 20,394 Trader Rating: (0) Rides Gallery: ThatGuy Feedback Score: 0 reviews	No he's talking about "Home Depot SPL" garden edging lips that look like ass. Calm down. __________________ "Speak softly,..." -Pres. Teddy Roosevelt "Be polite, be professional, ..." -Gen. James Mattis

04-25-2005, 04:11 PM	#17
kandyflip445 Post Whore! Join Date: Sep 2002 Location: Arden, NC Age: 40 Posts: 4,460 Trader Rating: (1) Rides Gallery: kandyflip445 Feedback Score: 1 reviews	Looks nice. __________________ My 240 vBgarage

04-25-2005, 05:55 PM	#21
DRFT Post Whore! Join Date: Apr 2003 Location: Pow Pow Age: 41 Posts: 3,744 Trader Rating: (0) Feedback Score: 0 reviews	i hope you made the lip to extend to the fender pieces too...if not its gonna look even more out of place __________________ ApexNetwork.Net Sacramento & Norcal Forum

04-26-2005, 03:58 PM	#25
raen419 Zilvia Member Join Date: Jul 2003 Location: Jasper, AL Age: 42 Posts: 253 Trader Rating: (0) Feedback Score: 0 reviews	money sucks when you don't have it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode