transmission wiring - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

luke20 · 04-12-2002, 09:08 AM

I'm swapping a S13 blacktop SR20 into my 91 240 5 speed
the KA is ripped out, and the SR is being prepped to go in.  While comparing the two transmissions, I noticed something I've never heard about.  There are two plugs that are on the KA trans., (one on the bell housing, and one on the back half of the trans.) that aren't on the SR.  Also, the plugs are different.  Now, should I just use the harness from the KA, and switch plugs with the two sensors that are there, and forget about the other ones, or what?

04-12-2002, 09:08 AM	#1
luke20 Leaky Injector Join Date: Jan 2002 Posts: 68 Trader Rating: (0) Feedback Score: 0 reviews	I'm swapping a S13 blacktop SR20 into my 91 240 5 speed the KA is ripped out, and the SR is being prepped to go in.  While comparing the two transmissions, I noticed something I've never heard about.  There are two plugs that are on the KA trans., (one on the bell housing, and one on the back half of the trans.) that aren't on the SR.  Also, the plugs are different.  Now, should I just use the harness from the KA, and switch plugs with the two sensors that are there, and forget about the other ones, or what? __________________ You got him?  Yeah, I got him.  Good.  Take him.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode