help a newbie here - questions reguarding a 91 ka - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

91ka · 11-05-2005, 02:31 AM

wheres the ecu located?

whats the computer looking part between the two front seats. (you can only see it if your cars stripped.)

if i were to take the compression test, what is the average compression on 91 ka's.

thanks

s14_drifter8 · 11-05-2005, 07:27 AM

the ECU is located on the passenger side right next to the passenger's front door speaker. not in the door (you knoe wat i mean rite). i think the average compression ratios on the KA are 180psi across the cylinders. if there's a 14psi difference between any of the cylinders then...that's bad. i could be wrong. i think the computer looking part between your front seats is the "seat belt" computer. or is it an ABS computer? damn, what is it? i'm just as lost as you. hahahaha...

namster180 · 11-05-2005, 11:21 AM

it should be about 172 without carbon deposits. But if you are in +/- 10 of 172 in all cylinders you're good. Also the difference between your cylinders should be less than 10.

projectRDM · 11-05-2005, 04:20 PM

Quote:

Originally Posted by 91ka

wheres the ecu located?

whats the computer looking part between the two front seats. (you can only see it if your cars stripped.)

if i were to take the compression test, what is the average compression on 91 ka's.

thanks

It clearly says auto belt control or something similiar right on the box. If you can't read, you shouldn't be in here.

91ka · 11-05-2005, 06:04 PM

excuse ur rude behavior. your attitude towards everyone here is negative. GTFO!

**ThatGuy** · 11-05-2005, 06:25 PM

91ka, Russ knows more about 240's then santa knows about reindeer asses. When he speaks it is best to just listen. All of your questions could have been answered with a basic search. Watch what you say if you want to stay on Zilvia.net.

OdessaS13 · 11-05-2005, 06:32 PM

hahahahahahaha

Quote:

Russ knows more about 240's then santa knows about reindeer asses

it good to know santa knows his reindeer ass...cuz if he didnt cristmas just wouldnt be the same

undercoverdjay · 11-05-2005, 10:14 PM

Quote:

Originally Posted by OdessaS13

hahahahahahaha

it good to know santa knows his reindeer ass...cuz if he didnt cristmas just wouldnt be the same

hahaha, very nice.

91ka · 11-06-2005, 05:24 PM

this guy, ill give u the benefit of the doubt that he has much experience. but this isnt the marines. but out.

s14_drifter8 · 11-06-2005, 05:47 PM

hey, sorry. it's been like 1 year since i looked at all my car's internal computers.

**ThatGuy** · 11-06-2005, 08:31 PM

91ka, take a close look at my Screen name. See how it's all nice and BOLD and yours isn't. That means something. Mainly it means, I don't "butt out". I stay on top of things to make sure they don't get out of hand. In this instance I stepped in because you needed to calm down. Now please do so, and there will be no further problems. Understand?

projectRDM · 11-06-2005, 10:44 PM

Quote:

Originally Posted by 91ka

excuse ur rude behavior. your attitude towards everyone here is negative. GTFO!

Kid, you asked the most basic question ever created. However you yourself point out an obvious fact, you have a 1991 Nissan 240SX. That's fourteen years old. You don't think that there hasn't been enthusiasts and followers of the car since that time? ANYTHING you can possibly think of to ask has already been asked. Nearly everything possible has been discussed, documented, or disproven. Anyone with a shred of common sense would know this, and know that virtually any question they could ever think to ask has already been asked, answered, verified, and archived somewhere in this internet world. For you to make absolutely no effort to even try and research what you need to know shows total ignorance on your part. That's why I have an attitude, because your complete unwillingness to educate yourself is pathetic and explains why the world today is in such a sad state. You young kids hope for nothing but to have everything spoonfed to you, with a smile and a dollar bill, and without any return of appreciation for our efforts in the end.
If you can't even make an attempt to learn on your own, why should anyone help you?

91ka · 11-08-2005, 03:11 AM

wow, this is how you treat a new comer.

yes im here to learn, yes im open to different right answers, yes i can surf around for these simple answers, by why when you can aim STRAIGHT toward the answer. (Zilvia.net)

sw20>>s14 · 11-08-2005, 03:31 AM

this kids got spunk...i like that...but im sure thatguy and russ dont...best of luck to you kiddo...

**ThatGuy** · 11-08-2005, 07:17 AM

Spunk is fine, disrespect to senior members when you're you the new kid on the block doesn't fly on Zilvia.net. We'll see how he does from now on. He's only 5 posts in, so he has time to shape up.

91ka · 11-09-2005, 01:42 AM

i respect toward people who have far more experience. but try to take advantage because im a newb i will not allow. basically, ill treat you for who you really are.

*NemeGuero* · 11-09-2005, 02:52 AM

Quote:

Originally Posted by 91ka

i respect toward people who have far more experience. but try to take advantage because im a newb i will not allow. basically, ill treat you for who you really are.

nobody is taking advantage. you just need to watch who you tell what.. especially when you're asking such simple minded questions.

i8yourfwd · 11-09-2005, 03:02 AM

Quote:

Originally Posted by 91ka

i respect toward people who have far more experience. but try to take advantage because im a newb i will not allow. basically, ill treat you for who you really are.

Look it's just how zilvia is. Don't like it? Go to 240sxforums.com or something. Zilvia has a wealth of information but they don't take kindly to stupid questions. Especially questions that can be answered using the search button. Also, watch your attitude, you'll get kicked off of here quick trying to pick fights with mods

"There are no stupid questions, just stupid newbs (WHO NEVER SEARCH!!!!)"

Anyways, to answer your questions. I would suggest downloading a FSM. It'll have answers for all the simple questions you have, and is a great resource all in all.

Here you go:
http://www.zeroyon.com/index/content/view/24/47/

FSMs for SR, RB, CA, and of course your beloved KA powered 240

unwed_transient · 11-09-2005, 08:42 PM

at this thread.

AadosX · 11-10-2005, 03:54 AM

LOLOL! Russ FTW.

How can you guys even read his posts?... when did English become so hard to use?

Anyways, I'm a noob too, at least (hopefully) you can understand what I'm saying.

And BTW, to the original poster, when they say search, they mean on Zilvia.net, not on the general internet. Therefore, you are still 'aiming at the correct answer.'

And lastly: "yes im open to different right answers"... WHAT? That doesn't even make sense.

11-05-2005, 02:31 AM	#1
91ka Leaky Injector Join Date: Oct 2005 Location: CA Posts: 99 Trader Rating: (0) Feedback Score: 0 reviews	help a newbie here - questions reguarding a 91 ka wheres the ecu located? whats the computer looking part between the two front seats. (you can only see it if your cars stripped.) if i were to take the compression test, what is the average compression on 91 ka's. thanks

11-05-2005, 07:27 AM	#2
s14_drifter8 Join Date: Oct 2005 Location: Lansing, MI Age: 37 Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	the ECU is located on the passenger side right next to the passenger's front door speaker. not in the door (you knoe wat i mean rite). i think the average compression ratios on the KA are 180psi across the cylinders. if there's a 14psi difference between any of the cylinders then...that's bad. i could be wrong. i think the computer looking part between your front seats is the "seat belt" computer. or is it an ABS computer? damn, what is it? i'm just as lost as you. hahahaha... __________________ "Full throttle all the way until you see God, then let off" (\__/) (='.'=) (")_(")

11-05-2005, 06:25 PM	#6
ThatGuy Admin Asshole Join Date: Mar 2002 Location: Retired Age: 45 Posts: 20,394 Trader Rating: (0) Rides Gallery: ThatGuy Feedback Score: 0 reviews	91ka, Russ knows more about 240's then santa knows about reindeer asses. When he speaks it is best to just listen. All of your questions could have been answered with a basic search. Watch what you say if you want to stay on Zilvia.net. __________________ "Speak softly,..." -Pres. Teddy Roosevelt "Be polite, be professional, ..." -Gen. James Mattis

11-06-2005, 05:47 PM	#10
s14_drifter8 Join Date: Oct 2005 Location: Lansing, MI Age: 37 Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	hey, sorry. it's been like 1 year since i looked at all my car's internal computers. __________________ "Full throttle all the way until you see God, then let off" (\__/) (='.'=) (")_(")

11-06-2005, 08:31 PM	#11
ThatGuy Admin Asshole Join Date: Mar 2002 Location: Retired Age: 45 Posts: 20,394 Trader Rating: (0) Rides Gallery: ThatGuy Feedback Score: 0 reviews	91ka, take a close look at my Screen name. See how it's all nice and BOLD and yours isn't. That means something. Mainly it means, I don't "butt out". I stay on top of things to make sure they don't get out of hand. In this instance I stepped in because you needed to calm down. Now please do so, and there will be no further problems. Understand? __________________ "Speak softly,..." -Pres. Teddy Roosevelt "Be polite, be professional, ..." -Gen. James Mattis

11-05-2005, 11:21 AM	#3
namster180 Join Date: Oct 2005 Location: oakland Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	it should be about 172 without carbon deposits. But if you are in +/- 10 of 172 in all cylinders you're good. Also the difference between your cylinders should be less than 10.

11-05-2005, 06:04 PM	#5
91ka Leaky Injector Join Date: Oct 2005 Location: CA Posts: 99 Trader Rating: (0) Feedback Score: 0 reviews	excuse ur rude behavior. your attitude towards everyone here is negative. GTFO!

11-06-2005, 05:24 PM	#9
91ka Leaky Injector Join Date: Oct 2005 Location: CA Posts: 99 Trader Rating: (0) Feedback Score: 0 reviews	this guy, ill give u the benefit of the doubt that he has much experience. but this isnt the marines. but out.

11-08-2005, 03:11 AM	#13
91ka Leaky Injector Join Date: Oct 2005 Location: CA Posts: 99 Trader Rating: (0) Feedback Score: 0 reviews	wow, this is how you treat a new comer. yes im here to learn, yes im open to different right answers, yes i can surf around for these simple answers, by why when you can aim STRAIGHT toward the answer. (Zilvia.net)

11-08-2005, 03:31 AM	#14
sw20>>s14 Post Whore! Join Date: Jan 2005 Location: bay area Posts: 5,656 Trader Rating: (19) Feedback Score: 19 reviews	this kids got spunk...i like that...but im sure thatguy and russ dont...best of luck to you kiddo... __________________ s14\| y34\| 911 gts\| exige s\| 600rr\| r3\| 250r\| 85 girlfriend

11-08-2005, 07:17 AM	#15
ThatGuy Admin Asshole Join Date: Mar 2002 Location: Retired Age: 45 Posts: 20,394 Trader Rating: (0) Rides Gallery: ThatGuy Feedback Score: 0 reviews	Spunk is fine, disrespect to senior members when you're you the new kid on the block doesn't fly on Zilvia.net. We'll see how he does from now on. He's only 5 posts in, so he has time to shape up. __________________ "Speak softly,..." -Pres. Teddy Roosevelt "Be polite, be professional, ..." -Gen. James Mattis

11-09-2005, 01:42 AM	#16
91ka Leaky Injector Join Date: Oct 2005 Location: CA Posts: 99 Trader Rating: (0) Feedback Score: 0 reviews	i respect toward people who have far more experience. but try to take advantage because im a newb i will not allow. basically, ill treat you for who you really are.

11-09-2005, 08:42 PM	#19
unwed_transient Zilvia Addict Join Date: Jun 2005 Location: SoCal Posts: 760 Trader Rating: (0) Feedback Score: 0 reviews	at this thread.

11-10-2005, 03:54 AM	#20
AadosX Zilvia Addict Join Date: Dec 2003 Location: Auburn University Posts: 959 Trader Rating: (0) Feedback Score: 0 reviews	LOLOL! Russ FTW. How can you guys even read his posts?... when did English become so hard to use? Anyways, I'm a noob too, at least (hopefully) you can understand what I'm saying. And BTW, to the original poster, when they say search, they mean on Zilvia.net, not on the general internet. Therefore, you are still 'aiming at the correct answer.' And lastly: "yes im open to different right answers"... WHAT? That doesn't even make sense.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode