Introducing ICHIBA USA Aluminum Wheel Spacer All Size Available! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

sw20>>s14 · 07-21-2006, 04:32 AM

Quote:

Originally Posted by MiamiGrinch240

Something I wonder about hubcentric spacers. It's 66.2 on the side with the hub but if u use aftermarket wheels like most people do, the size u need where the wheels mount is 73.1 or so. So then u gotta buy hubcentric rings just to make them get a good fit. That's what I had to do when I bought some 15mm hubcentric spacers a couple years back and it sucked to have to do that.

Unless u can order these with 66.2 on the inside and 73.1 on the part the wheels mounts to?

good question, do you guys offer/plan to offer wheelcentric and hubcentric spacers for nissans? btw miamigrinch, you'd most likely have to get hub rings for 99.9% of aftermarket rims out there anyway, so its no trouble, but IMO it would be nice if there were less loose pcs and one pc of metal took care of everything...

slow_sr20 · 07-24-2006, 03:22 PM

how long are the studs supposed to be with the 5mm kit?

ichibausa · 07-25-2006, 03:23 PM

Quote:

Originally Posted by slow_sr20

how long are the studs supposed to be with the 5mm kit?

the Thread length is 35MM

slow_sr20 · 07-26-2006, 03:31 PM

o.k. well are they supposed to be the same length as the other kits? because with a digitial caliper they ( the ones that came with my 5mm kit) only measure 53.xx mm (end to end) -looks to be the same length as stock-can i exchange theese for longer ones? or did i get incorrect studs with my kit?

ichibausa · 08-01-2006, 04:44 PM

Quote:

Originally Posted by slow_sr20

o.k. well are they supposed to be the same length as the other kits? because with a digitial caliper they ( the ones that came with my 5mm kit) only measure 53.xx mm (end to end) -looks to be the same length as stock-can i exchange theese for longer ones? or did i get incorrect studs with my kit?

I don't think it's incorrect studs. You can go ahead put our studs. Try It First!

MiamiGrinch240 · 08-09-2006, 08:16 PM

Quote:

Originally Posted by sw20>>s14

good question, do you guys offer/plan to offer wheelcentric and hubcentric spacers for nissans? btw miamigrinch, you'd most likely have to get hub rings for 99.9% of aftermarket rims out there anyway, so its no trouble, but IMO it would be nice if there were less loose pcs and one pc of metal took care of everything...

I guess we don't get a reply?

ichibausa · 08-09-2006, 08:50 PM

Quote:

Originally Posted by MiamiGrinch240

I guess we don't get a reply?

Our spacers are hubcentric already. We are planning to get some extra hub rings for aftermarket wheel due to some customers requested. We will post up once we got them.

Update News:

For the customers who interested in 10MM, they are coming soon. Also will post up when they come in. Thanks for all!

sw20>>s14 · 08-10-2006, 05:04 PM

Quote:

Originally Posted by ichibausa

For the customers who interested in 10MM, they are coming soon. Also will post up when they come in. Thanks for all!

yes! yes! please be soon...like very very soon! i need them for a track day on sept 1st...are they gonna be available by then? please keep up posted, thanks...

ryan hagen · 09-08-2006, 05:52 AM

i just ordered from your site, i need 15mm 5 lug spacers for the rear of a s14 95-98. thanks, the payment will be from jan hagen. the studs are differnt for front and rear and i didnt see a selection area.

Revup Performance · 09-08-2006, 10:35 AM

Quote:

Originally Posted by ryan hagen

i just ordered from your site, i need 15mm 5 lug spacers for the rear of a s14 95-98. thanks, the payment will be from jan hagen. the studs are differnt for front and rear and i didnt see a selection area.

Got your order Ryan, I sent you emails asking for which lug, but I got the info already, 5 lug correct. I will ship out your spacers today, thanks again!!!!!!!!

AuburnRyan · 12-14-2006, 01:36 PM

Quote:

Originally Posted by ichibausa

Our spacers are hubcentric already. We are planning to get some extra hub rings for aftermarket wheel due to some customers requested.

Ichibausa - Your spacers larger than 5 mm have a lip - the inside of that diameter is 66.2, making it hubcentric.

What is the outside diameter? That way we know what wheel centric rings to buy, or if we need any at all...

ichibausa · 12-14-2006, 03:05 PM

Quote:

Originally Posted by AuburnRyan

Ichibausa - Your spacers larger than 5 mm have a lip - the inside of that diameter is 66.2, making it hubcentric.

What is the outside diameter? That way we know what wheel centric rings to buy, or if we need any at all...

The inside & outside diameter is same size 66.2

AuburnRyan · 12-16-2006, 08:57 PM

Quote:

Originally Posted by ichibausa

The inside & outside diameter is same size 66.2

Physically Imposible

There's a "lip"...but thank for the response

If the lip is say 2 mm thick, than the outside diameter would be 4 mm larger than 66.2

There lip is there for the wheels to mount on, correct? This is where you'd place a centering ring for the wheels if needed...

element728 · 12-17-2006, 06:57 PM

Quote:

Originally Posted by AuburnRyan

Physically Imposible

There's a "lip"...but thank for the response

If the lip is say 2 mm thick, than the outside diameter would be 4 mm larger than 66.2

There lip is there for the wheels to mount on, correct? This is where you'd place a centering ring for the wheels if needed...

This is possible. The inside diameter is not all the way through the lip.

09-08-2006, 05:52 AM	#9
ryan hagen Zilvia FREAK! Join Date: Jan 2003 Location: rhinelander wisconsin Age: 42 Posts: 1,465 Trader Rating: (8) Feedback Score: 8 reviews	i just ordered from your site, i need 15mm 5 lug spacers for the rear of a s14 95-98. thanks, the payment will be from jan hagen. the studs are differnt for front and rear and i didnt see a selection area. __________________ 1990 hatch ka24de gt2871r

07-24-2006, 03:22 PM	#2
slow_sr20 Zilvia Addict Join Date: Aug 2005 Location: dayton, oh Posts: 723 Trader Rating: (13) Feedback Score: 13 reviews	how long are the studs supposed to be with the 5mm kit?

07-26-2006, 03:31 PM	#4
slow_sr20 Zilvia Addict Join Date: Aug 2005 Location: dayton, oh Posts: 723 Trader Rating: (13) Feedback Score: 13 reviews	o.k. well are they supposed to be the same length as the other kits? because with a digitial caliper they ( the ones that came with my 5mm kit) only measure 53.xx mm (end to end) -looks to be the same length as stock-can i exchange theese for longer ones? or did i get incorrect studs with my kit?