im lost.. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

wannaBboost · 03-27-2010, 11:17 AM

whats up everyone. i know im new to the site and all.and i also know i should search but ive been searching everywhere and got nothing. im in the process of doing my friends sr swap right now. does anyone know where to mount the intercooler at. or how. might i add that it is a ebay intercooler ebay piping and so on.. if you guys could help woth telling me where or show me a site or something that will guide me in the right direction that would be great. this is a s13 might i add

240sxrb25 · 03-27-2010, 11:19 AM

haha, chuckle chuckle. sorry

i cut a small portion of the back side of the reinforcement bar and put mine between the radiator and re-bar.

240sxfamily · 03-27-2010, 11:22 AM

hahahaha. make tabs, connect it to wherever you can, head light supports, rad support, whatevers easier.

wannaBboost · 03-27-2010, 11:30 AM

thanks guys its not my car so im gunna ask him whats ok and not. my thing is the brackets are not long enough so a trip to lowes or home depot will be in the making. i mocked it up and it hits the light support

Anavaree · 03-28-2010, 08:17 PM

I got myself an ebay special i/c kit, came with a buch of brackets and bolts and stuff. i used nothing they game me in its original form.

Hopefully your I/C has a tab on the top in the center of the ic. if so i would start by using some sort of plate or bracket to hang the ic from the bolt just below the hood latch mechanism. i slotted my bracket so that i could adjust the height of the ic behind the front fascia.
then from there i used some plates that came with the kit, bent them to my will and connected them to my lower rad support thru 2 holes that were already there. my ic had to M8 bosses tig'ed to the bottom of the IC.
thats the only 3 points i actually have mounted to the car. i used the ic piping to stabilize the rest but you really wont need much more.

i am trying to find some pics to post later.

Anavaree · 03-28-2010, 08:39 PM

well this wont let my upload my pics. dont know what the problem is.

Addicted2Kouki · 03-28-2010, 08:27 PM

Basically.
a FRONT MOUNT intercooler goes
in front of the radiator support, behind the rebar.
remove the rebar and install piping.
check for clearances with rebar on (if you want to keep it)
cut, make brackets, mount.
check for clearances with bumper.
cut.
done.

The real question is....
If you are unsure about installing an intercooler...
Should you be handling your friends SR swap?

Anavaree · 03-28-2010, 08:55 PM

i wanna help but everytime i try to upload my pic the attachment manager says i have exceeded my quota. the image is only 98k. any help on what i am doing wrong? i a have already checked the faq and i am doing what it says.

03-27-2010, 11:17 AM	#1
wannaBboost Join Date: Feb 2010 Location: dirty jersey Posts: 6 Trader Rating: (0) Feedback Score: 0 reviews	im lost.. whats up everyone. i know im new to the site and all.and i also know i should search but ive been searching everywhere and got nothing. im in the process of doing my friends sr swap right now. does anyone know where to mount the intercooler at. or how. might i add that it is a ebay intercooler ebay piping and so on.. if you guys could help woth telling me where or show me a site or something that will guide me in the right direction that would be great. this is a s13 might i add

03-27-2010, 11:19 AM	#2
240sxrb25 Zilvia Junkie Join Date: Aug 2006 Location: omaha, ne Age: 35 Posts: 451 Trader Rating: (2) Feedback Score: 2 reviews	haha, chuckle chuckle. sorry i cut a small portion of the back side of the reinforcement bar and put mine between the radiator and re-bar.

03-27-2010, 11:22 AM	#3
240sxfamily BANNED Join Date: Aug 2009 Location: phillyy Posts: 705 Trader Rating: (2) Feedback Score: 2 reviews	hahahaha. make tabs, connect it to wherever you can, head light supports, rad support, whatevers easier.

03-27-2010, 11:30 AM	#4
wannaBboost Join Date: Feb 2010 Location: dirty jersey Posts: 6 Trader Rating: (0) Feedback Score: 0 reviews	thanks guys its not my car so im gunna ask him whats ok and not. my thing is the brackets are not long enough so a trip to lowes or home depot will be in the making. i mocked it up and it hits the light support

03-28-2010, 08:17 PM	#5
Anavaree Join Date: Mar 2010 Location: Kentucky Age: 45 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	I got myself an ebay special i/c kit, came with a buch of brackets and bolts and stuff. i used nothing they game me in its original form. Hopefully your I/C has a tab on the top in the center of the ic. if so i would start by using some sort of plate or bracket to hang the ic from the bolt just below the hood latch mechanism. i slotted my bracket so that i could adjust the height of the ic behind the front fascia. then from there i used some plates that came with the kit, bent them to my will and connected them to my lower rad support thru 2 holes that were already there. my ic had to M8 bosses tig'ed to the bottom of the IC. thats the only 3 points i actually have mounted to the car. i used the ic piping to stabilize the rest but you really wont need much more. i am trying to find some pics to post later.

03-28-2010, 08:39 PM	#6
Anavaree Join Date: Mar 2010 Location: Kentucky Age: 45 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	well this wont let my upload my pics. dont know what the problem is.

03-28-2010, 08:55 PM	#8
Anavaree Join Date: Mar 2010 Location: Kentucky Age: 45 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	i wanna help but everytime i try to upload my pic the attachment manager says i have exceeded my quota. the image is only 98k. any help on what i am doing wrong? i a have already checked the faq and i am doing what it says.