PA Enkei-Greddy-Cusco-Stoptech-Seibon-ETS-Precision-Tial-Comp clutch-Mazworx-TONS MORE!

[Imarvin240]

THIS IS THE OLD THREAD, CHECK FOR THE NEW THREAD!!!!!!!!!

1. NO BASHING PRICES OR PARTS! if you dont like it, please leave!
2. If you PM, please also bump the thread.
3. Im always adding more parts and pictures to the thread, so check back every so often.
4. More parts have been added as of...11-29-11



Mazworx SR20DET Engine- I WILL NOT PART OUT THIS SR!

HEAD-
New SR20DET Head- $500
Stage 2 Port and Polish- $800
Polished Combustion Chamber- $210
Full Radius Valve job- $200
Tomei Intake Cam Gear- $200
HKS Exhaust Cam Gear- $200
Tomei Solid Lifters- $280
Tomei 270 Cams- $600
Brian Crower Springs and Titanium Retainers- $220
Supertech Valves- $300
HKS Rocker Arm Stoppers- $100
SR20DET Powder Coated Valve Cover- $150
Greddy Oil Cap- $80
New Muli-layer Exhaust Gasket- $80
New Cam Angle Sensor- $330
New Rocker Arms- $150

BLOCK-
SR20DET Redtop- Cost of a core block- $100
CP Pistons 86.5mm 9.0 CR- $525
Golden Eagle Sleeves- $375
Manley Turbo Tuff Rods- $725
Calico Coated ACL Race Bearings- $210
ARP Main Studs- $185
Balanced & Polished Crankshaft- $200
ATI Crank Pulley- $425
Greddy Oil Pan- $300
New Water Pump- $65
New Oil Pump- $375
Upper Oil Pan- $50
Sleeving- $280
Bore/Hone- $320
Whatever I Forgot- $X

TOTAL= $8,535.00+

ASKING= $5,000 OBO

PHOTOS:







R33 Rb25 series II~15k miles since rebuilt- $1,800 obo SOLD!
Arp head studs
Arp main studs
Tomei triple metal head gasket

PHOTOS:




Q45 90mm Throttle Body SOLD!
- Perfect Shape
- $80


RB25 Exhaust mani ceramic coated- $550 SOLD!


Tial 38mm waste gate- $175 SOLD!


Precision 5557 t3 t4 turbo- $650 SOLD!



Mcckinny mounts- $300 SOLD!

Rb20 trans- $200 SOLD!

Competition stage 4 6 puck clutch- $300 SOLD!

Has 4/6 spitfires that come with it- make offer SOLD!


Waisted spark assembly- make offer SOLD!


rb25 to s13 Engine Harness w/ ecu- make offer SOLD!


rb25 Alternator SOLD!
- Perfect Shape
- $125


6 370cc injectors in rb25 fuel rail SOLD!
- Used
- $150


sr to vg adapter plate SOLD!
- NEW!
- $400 shipped


Enkei RPF1
17 X 9.5 +18
17 X 10 +15
- ~2k miles
- $900


Cusco SR motor mounts
- ~1k miles
- $200


350z Stock arms
- ~20k miles
- Make offers

350z Master 1 1/16th
- Perfect Shape
- $60


350z Brake Booster
- Perfect Shape
- $125


350z 03' tinted tail lights
- Great shape
- $150


350z Seibon Carbon Hatch
- ~5k miles
- $550


350z Stoptech floating 355x32mm AeroRotors
- ~3k miles
- $500


350z Seats
- ~20k miles
- $500


350z oem Radiator
- ~20k miles
- $100


TurboSmart Megasonic Blow Off Valve
- ~1-2k miles
- $150 + shipping


Kisuu Custom Made Fuel Rail
- NEVER USED
- $150 + shipping


S15 Hood
- NEVER USED
- $250


ETS Custom Made Intercooler 24X8X3
- NEVER USED
- PERFECT SHAPE
- $175


Greddy Intake Manifold Modifide and Comes w/ Q45 (90mm) Throttle body- SOLD!
- Roughly 500 miles
- PEFRECT SHAPE
- $600


KU Engineering Intake Manifold
- Never Used
- $300


N62 Maf (no pigtail)
- Perfect Shape
- $125


Origin Canards w/ custom aluminum skid plates
- never used
- $175


Q45 Throttle Body
- Used
- $75

Unknown Brand BOV
- Slightly Used
- PERFECT SHAPE
- $50

ROSS TUFFBOND Water Pump Pulley
-ONLY MOUNTED
-PERFECT!
-$100


S14 SR20 88.5mm Cometic Metal Head Gasket multilayer
- NEVER USED
- PERFECT SHAPE
- $70

OEM SR20VE Valvetrain (IN+EX Valves, Springs, Cams, Gears)
- 15,000 Miles
- PERFECT!
- MAKE OFFERS ON WHAT YOU NEED!

S14 Non-ABS Driveshaft
- Used
- $120

S13 Non-ABS Driveshaft
- Used
- $120

S13 SR Transmision -
- Roughly 30k miles
- PERFECT SHAPE
- $150

These are all the make an offer items...i dont want or need them all so just make an offer...pictures of these upon request...its to many pictures for the thread.

S13 SR OEM Coil Pack Cover
BNIB SR Multi Layer Exhaust Gasket
BNIB OEM SR Exhaust Gasket
SR OEM Exhaust Manifold w/ Heat Shield
(1) V1 Godspeed S13 Toe Arm
(1) V1 Godspeed S13 Traction Rod
Valve Cover Coil Plug Gasket
Water Outlet
Water Inlet
(4) Cam Oil Tubes (2 Sets)
(16) OEM Spring, Retainer, and Keeper (1 set)
(8) SR OEM Intake Valves (1 set)
(8) SR OEM Exhaust Valves (1 set)
(8) SR OEM Rocker Arm (1 Set)
(8) SR OEM Lifter (1 Set)
SR Block (bare) w/ 87mm bore (needs align bore...roughly 200 at any machine shop)
SR20 Front Cover w/ Oil Pump
(2) Oil sandwich plate Galley w/ sensor
(2) Upper Oil Pan
(2) Water Pump
Water Pump Pulley
(3) Rear Crank Case Cover
Crank Pulley
(4) SR Oil Squirters (1 Set)
(3) SR OEM Rod
(4) Upper Oil Pan Screen (2 Sets)
(3) Different SR20 Timing Chain Guides
(3) SR Timing Chain Tensioner
(2) SR Main Cap Girdle
(2) Alternator Bracket
AAC Valve
(3) Knock Sensor
(3) Coolant Tubes
(2) Thermostat Housing
(2) Coolant Temperature Sensor Housing
3” S14 Exhaust that was very hacked up but it has a Very good condition HKS muffler
Turbo Blanket (was on a T67)
SR Transmission Plate
SR OEM Turbo Lines
S13 Rear OEM Chamber Arm
S13 Rear OEM Traction Arm
S13 Rear OEM Toe Arm
stock KA24de fuel pump (in working order)
stock KA24de header + stock heatsheild
stock KA24de airbox intake system and Filter is still clean
Summit Liquid Fuel Pressure Gauge

Thank You For Looking!

[JonathanPrem]

Can you give me the best price shipped for s13 sr spark cover, s13 sr valve cover gasket and spark plug gasket to canada ontario m1r5s1

[d-man478]

Good stuff here. Bump for you

[Drftr915]

bump for a great guy to work with.

[Highlo630]

Rb mounts work for both s13 and 14?

[Briou]

Is the greddy intake with the q45 tb an s13 or s14/s15 intake...couldn't tell from pics...I will PM you aswell....great sale thread...Bump!!

[TheRealSy90]

How much for an upper oil pan with screen and a good water pump to 85364? Thanks.

[Imarvin240]

LIST UPDATED WITH MORE PARTS!

more pics will be up this weekend!

[Trinidrift3]

Pm me pics of the canards?

[S14 James]

Send me a E-mail on the RB Manifold (I'm assuming that is a T3)
[email protected]
-James

[Imarvin240]

Bump number 1!

Make offers people!

More pics up this weekend!

[Imarvin240]

BUMP NUMBER 2!

more photos/parts added. Also, more photos and parts will be added this week once i go through more of my storage unit.

please make offers to help fund the current car build. thanks guys.

[BryanR00]

Wow $5000 for a fully built SR by MazWorx is crack prices! Man if I had the money you'd best believe I'd be all over this. GLWS!

[pinkarrowsnow]

ugh i need these wheels! let me see if i can get some money together im local too.

[Imarvin240]

10% off everything till December 10th.

get your Christmas shopping done now!

[venom2034]

cant get the pm window to open up. Im interested in the wheels. would you ship to new york?

[Detroit.Tee.Tee]

Hey Marvin,

I am interested in the McKinney Mounts. Those will fit on an RB25, I assume. Also, the trans mount is included?

[Q.Smooth127]

Damn...i wanted that sr greddy intake mani wit the q45 tb but it sold already ya?

[TurboStrong]

do you have an rb25 power steering pump and brackets?

[Imarvin240]

yes, i will ship the wheels, engine, and everything except the hood and hatch.

[JohnJunYi]

bump pm is about to be sent

[240sxwanted]

willing to part the rb25 head?

[Imarvin240]

Originally Posted by 240sxwanted

willing to part the rb25 head?

Sorry guys, not willing to part out the engines. Only way that will happen is if you pay for the head gasket that would then be worthless and for my labor of taking everything apart...thats the only way.

[je_decoy]

Would you post up some pics of the oil sandwich plates also what kind are they thanks glws

[slow92]

Will the KU Engineering manifold accept a q45 throttle body or do I have to get an adapter?

[Imarvin240]

Originally Posted by slow92

Will the KU Engineering manifold accept a q45 throttle body or do I have to get an adapter?

you would need to get an adapter.

more parts/pics added

[AS240]

pm sent
*bump it up*

[zneubauer]

bump for yuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu.

[dtfdanyo]

would you split and sell the 17x9.5 separately?

[EsChassisLove]

Your oil pump was $375??

They are $240 brand new OEM O.o

Is it aftermarket?