Project BNR32 - Page 29 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

DJTTon · 06-11-2017, 06:09 PM

I see you got some new wheels + spacers for the G35? Im starting to throw mine on as well. Definitely loving the look with the OEM rays wheels

eagleeyes221 · 06-19-2017, 03:55 PM

i have been reading this for the last week straight in my spare time at work, love the thread and all the work you have done so far!!

Sileighty_85 · 07-05-2017, 08:33 AM

Quote:

Originally Posted by eagleeyes221

i have been reading this for the last week straight in my spare time at work, love the thread and all the work you have done so far!!

Thanks man, looks like you did it just in time to. Lol

Not sure what I'm gonna do about this.

Probably use another host for now but I'll have to be extremely bored to fix all the previous photos or wait to see what photobucket does.

Sileighty_85 · 07-24-2017, 06:20 PM

Guess im gonna ue Flicker till i find a better host

Finally got in my ARP exhaust studs, so i can bolt on the turbos now!

Untitled by Neil Sellers, on Flickr

Sileighty_85 · 08-08-2017, 09:02 PM

Finally got around to installing the Rear brembos.

Probably gonna look into finding a BCNR33 brake master cylinder as the pedal feel is a bit softer than what I prefer. Still stops amazingly though.

Untitled by Neil Sellers, on Flickr

Sileighty_85 · 07-06-2018, 12:33 AM

Few shots my buddy took.

Progress on the engine, OEM water pump, belt pullies with ARP hardware

HKS belt installed

Intake manifold installed, just need to adjust the linkage, route a few hoses and trq a few bokts and it should be ready to install!

eagleeyes221 · 07-06-2018, 06:28 AM

woo progress, glad to see this thread isn't dead yet

gostrider · 10-09-2018, 10:56 AM

how do you like your current brake pads compare to the project U ? stopping ? noise ?

Sileighty_85 · 10-21-2018, 07:36 PM

Quote:

Originally Posted by gostrider

how do you like your current brake pads compare to the project U ? stopping ? noise ?

Current setup is great, has a smooth initial bite, no noise. only thing I wanna do next is install the R33 BMC as the pedal is a bit soft on the top end.

gostrider · 10-22-2018, 09:00 AM

Quote:

Originally Posted by Sileighty_85

Current setup is great, has a smooth initial bite, no noise. only thing I wanna do next is install the R33 BMC as the pedal is a bit soft on the top end.

where did you buy your current pads from? I cant find them in the US. I was thinking going carbotech.

Sileighty_85 · 10-22-2018, 09:38 PM

Quote:

Originally Posted by gostrider

where did you buy your current pads from? I cant find them in the US. I was thinking going carbotech.

Think I go them from here http://rightdriveparts.com/hawk-hp-p...-skyline-gt-r/

So tired of dealing with HID's so decided to try some LED Headlights.

Im liking these a bit better as far as fitment goes, everything plugs right in with no modding.

Set up comparison

Left side HID Right Side LED

Installed

to late to wake up the neighbors so have to go for a drive tomorrow night.

But looking good thus far, and i have High Beams again!

RVAE34 · 10-23-2018, 10:11 AM

Very nice. Loving those LED lights. How is the cutoff though?

Sileighty_85 · 10-24-2018, 07:08 AM

Quote:

Originally Posted by RVAE34

Very nice. Loving those LED lights. How is the cutoff though?

Still havent driven on them but seem pretty good, cant be any worse than the HID's.

Also noticed the bulbs can swivle in the housing to further adjust the cut off.

Quote:

Originally Posted by Dolph_KYAS13

I'm going to have to try out those LEDs. do you have a link for them?

https://www.xkglow.com/LED_Headlight...ruck_s/116.htm

Dolph_KYAS13 · 10-24-2018, 06:27 AM

I'm going to have to try out those LEDs. do you have a link for them?

codyzsilvia · 10-24-2018, 07:19 AM

Maybe a dumb question but are the Skyline low beams H3C like the Silvia's? Every low beam LED bulb I've gotten has been a dim fog light bulb lol. LED's are the shit though

gostrider · 10-25-2018, 10:45 AM

LEDs are a PIA to fit in the housings. at least the ones I did in my r32. Link to yours?

Sileighty_85 · 10-28-2018, 06:34 PM

Quote:

Originally Posted by codyzsilvia

Maybe a dumb question but are the Skyline low beams H3C like the Silvia's? Every low beam LED bulb I've gotten has been a dim fog light bulb lol. LED's are the shit though

Depends on the year, pre 91 headlights use H3C, post 91 use H1.

If your bulbs you are using dont have a ballast box then they are probably gonna suck

Quote:

Originally Posted by gostrider

LEDs are a PIA to fit in the housings. at least the ones I did in my r32. Link to yours?

These were painless. Fully PNP no modding required.

2 posts up is the link

240sx_sr20det · 10-28-2018, 07:34 PM

Awesome updates! I need to read through the whole thing when I get some time.

What's the current exhaust on the car? Any drone?

06-11-2017, 06:09 PM	#1
DJTTon Zilvia Addict Join Date: Nov 2015 Location: Where the bad guys are Posts: 886 Trader Rating: (6) Feedback Score: 6 reviews	I see you got some new wheels + spacers for the G35? Im starting to throw mine on as well. Definitely loving the look with the OEM rays wheels __________________ Skurr Skurr

07-24-2017, 06:20 PM	#4
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	Guess im gonna ue Flicker till i find a better host Finally got in my ARP exhaust studs, so i can bolt on the turbos now! Untitled by Neil Sellers, on Flickr Untitled by Neil Sellers, on Flickr Untitled by Neil Sellers, on Flickr Untitled by Neil Sellers, on Flickr Untitled by Neil Sellers, on Flickr Untitled by Neil Sellers, on Flickr Untitled by Neil Sellers, on Flickr Untitled by Neil Sellers, on Flickr Untitled by Neil Sellers, on Flickr Untitled by Neil Sellers, on Flickr Untitled by Neil Sellers, on Flickr Untitled by Neil Sellers, on Flickr Untitled by Neil Sellers, on Flickr Untitled by Neil Sellers, on Flickr __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

08-08-2017, 09:02 PM	#5
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	Finally got around to installing the Rear brembos. Probably gonna look into finding a BCNR33 brake master cylinder as the pedal feel is a bit softer than what I prefer. Still stops amazingly though. Untitled by Neil Sellers, on Flickr Untitled by Neil Sellers, on Flickr Untitled by Neil Sellers, on Flickr __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

07-06-2018, 12:33 AM	#6
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	Few shots my buddy took. Progress on the engine, OEM water pump, belt pullies with ARP hardware HKS belt installed Intake manifold installed, just need to adjust the linkage, route a few hoses and trq a few bokts and it should be ready to install! __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

10-09-2018, 10:56 AM	#8
gostrider Zilvia Addict Join Date: Feb 2012 Location: CFL Age: 12 Posts: 638 Trader Rating: (7) Feedback Score: 7 reviews	how do you like your current brake pads compare to the project U ? stopping ? noise ? __________________ *240 with illegal engine mod.*

06-19-2017, 03:55 PM	#2
eagleeyes221 Leaky Injector Join Date: Jan 2013 Location: connecticut Age: 34 Posts: 124 Trader Rating: (1) Feedback Score: 1 reviews	i have been reading this for the last week straight in my spare time at work, love the thread and all the work you have done so far!!

07-06-2018, 06:28 AM	#7
eagleeyes221 Leaky Injector Join Date: Jan 2013 Location: connecticut Age: 34 Posts: 124 Trader Rating: (1) Feedback Score: 1 reviews	woo progress, glad to see this thread isn't dead yet

10-23-2018, 10:11 AM	#12
RVAE34 Zilvia Junkie Join Date: Jan 2018 Location: Virginia Age: 46 Posts: 364 Trader Rating: (0) Feedback Score: 0 reviews	Very nice. Loving those LED lights. How is the cutoff though?

10-24-2018, 06:27 AM	#14
Dolph_KYAS13 Zilvia Addict Join Date: Jul 2008 Location: Canada Age: 38 Posts: 726 Trader Rating: (0) Feedback Score: 0 reviews	I'm going to have to try out those LEDs. do you have a link for them? __________________ -Jordie Lewis '93 Skyline Type M

10-24-2018, 07:19 AM	#15
codyzsilvia Zilvia Member Join Date: Nov 2014 Location: Virginia, USA Posts: 157 Trader Rating: (1) Feedback Score: 1 reviews	Maybe a dumb question but are the Skyline low beams H3C like the Silvia's? Every low beam LED bulb I've gotten has been a dim fog light bulb lol. LED's are the shit though __________________ METAL FOR LIFE

10-25-2018, 10:45 AM	#16
gostrider Zilvia Addict Join Date: Feb 2012 Location: CFL Age: 12 Posts: 638 Trader Rating: (7) Feedback Score: 7 reviews	LEDs are a PIA to fit in the housings. at least the ones I did in my r32. Link to yours? __________________ *240 with illegal engine mod.*

10-28-2018, 07:34 PM	#18
240sx_sr20det Nissanaholic! Join Date: Dec 2006 Location: Richmond, VA Posts: 1,658 Trader Rating: (3) Feedback Score: 3 reviews	Awesome updates! I need to read through the whole thing when I get some time. What's the current exhaust on the car? Any drone?