|
Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series. |
|
Thread Tools | Display Modes |
09-03-2014, 09:04 AM | #4381 |
Zilvia Junkie
|
Tweak'd did my harness and highly recommend them if you are looking for a place to get it done. If you are doing it yourself contact rswails on here, he was working on a how to guide I believe.
__________________
'98 Kouki Build in Progress '10 Subaru Legacy 2.5GT |
Sponsored Links |
09-04-2014, 12:47 AM | #4384 |
Zilvia Junkie
Join Date: Feb 2007
Location: vancouver, canada
Age: 38
Posts: 360
Trader Rating: (1)
Feedback Score: 1 reviews
|
i need help.
my car won't fire. i already know it's the injectors not firing. fuel is getting to the rail i'm running bosch 750cc high imp the injectors fire if i use a 9v battery to test the solenoid. so they are not stuck. the harness is all custom. i have deleted the stock resistor box. i run a direct 12v line from ignition to the injectors and then from the injectors directly to the ecu. with ign on i get 12v at the injector plugs. my multimeter isn't able to see the ecu pulse but i'm getting my hands on a noid set tomorrow. ecu is an aem v2 and i have used the wizard to select the correct injectors ideas? |
09-04-2014, 08:40 AM | #4385 | |
Leaky Injector
Join Date: Jul 2012
Location: Knoxville, TN
Age: 47
Posts: 88
Trader Rating: (0)
Feedback Score: 0 reviews
|
Quote:
|
|
09-04-2014, 08:44 AM | #4386 |
Nissanaholic!
Join Date: Mar 2007
Location: Ft. Lauderdale
Age: 38
Posts: 1,776
Trader Rating: (12)
Feedback Score: 12 reviews
|
Had the same issue with mine. Turned out to be a setting in the V2 that was off. I'm running FIC 775cc high imp and AEM V2. Have someone knowledgeable With the v2 look at it
__________________
|
09-04-2014, 06:18 PM | #4388 |
Zilvia Junkie
|
You said the harness was custom, did you check every connection back to the ECU with a multimeter?
__________________
'98 Kouki Build in Progress '10 Subaru Legacy 2.5GT |
09-05-2014, 02:32 PM | #4390 |
Zilvia Member
|
Try these links :
2JZ wiring - http://tinyurl.com/lo7j7ry 2JZ wiring in s14 - http://tinyurl.com/n2ude5j |
09-06-2014, 04:35 PM | #4391 | |
Zilvia Junkie
|
Quote:
I'm sure the s13/14 side of the wiring from those links would come in handy but he was asking about a 2j VVTi which is a wiring nightmare compared to the non VVTi.
__________________
'98 Kouki Build in Progress '10 Subaru Legacy 2.5GT |
|
09-10-2014, 06:03 PM | #4395 |
Leaky Injector
|
|
09-10-2014, 06:38 PM | #4396 |
Zilvia Member
|
|
09-11-2014, 07:15 AM | #4398 |
Zilvia Member
|
plugs were out when I got it but that was from someone local, not sure about when he got it from the importer. Had to rebuild my head already and now I get this problem from the block project cars suck
|
09-11-2014, 07:32 AM | #4399 |
Zilvia Member
|
Ya my motor was in good shape. But I could tell the valve seals were worn in a couple cylinders. But I'm an overkill kind of guy. So I'm doing a full build. I need to start a build thread. Ha
|
09-12-2014, 02:12 PM | #4400 |
Post Whore!
Join Date: Apr 2007
Location: Wisconsin
Age: 37
Posts: 3,685
Trader Rating: (13)
Feedback Score: 13 reviews
|
So over the past few weeks i've noticed some poor connections on the wiring to the connectors due to the OEM 20 year old terminals going bad, Anyone know a place i can get a bunch of terminals for wiring for a decent price other than Elmhurst Toyota?
__________________
2JZ-GTE Swapped S13 Coupe - 1994 Supra Turbo |
09-12-2014, 04:04 PM | #4401 |
Zilvia Junkie
Join Date: Oct 2012
Location: dfw texas
Age: 36
Posts: 372
Trader Rating: (4)
Feedback Score: 4 reviews
|
Each plug has a number on it you can Google the numbers and find the plugs, think I paid about $130 for every plug on the harness with pins and little rubber insulator things
|
09-12-2014, 06:08 PM | #4403 |
Zilvia Junkie
|
|
09-16-2014, 11:14 AM | #4406 |
Zilvia Junkie
|
2JZGTE Swapped S-Chassis thread
Have you compared to a non VVTi? Not saying it's impossible but it's no walk in the park 9 wires like the non VVTi
__________________
'98 Kouki Build in Progress '10 Subaru Legacy 2.5GT |
09-16-2014, 01:38 PM | #4408 |
Nissanaholic!
Join Date: Mar 2007
Location: Ft. Lauderdale
Age: 38
Posts: 1,776
Trader Rating: (12)
Feedback Score: 12 reviews
|
Having trouble with my Dakota Digital SGI-8 (Tach Signal Converter) I plugged in into my wiring specialties harness that had the leads for it and Im getting no movement to my tach. The box lights up (flashes). Im running AEM V2, wiring specialties harness, Non-vvti 2JZ-GTE, JDM Cluster, S13. Any ideas? Anyone have the settings for the DD box?
Thanks
__________________
|
09-16-2014, 03:36 PM | #4409 |
Zilvia Junkie
|
|
09-17-2014, 02:52 PM | #4410 |
Zilvia Junkie
Join Date: Sep 2010
Location: Oklahoma city, ok
Age: 35
Posts: 414
Trader Rating: (11)
Feedback Score: 11 reviews
|
How is you brake booster ran? My 2j has the port on top of the intake plenum but we just picked up my wife's 2j and it doesn't have the port
__________________
Follow me on Ig- Andydennington |
Bookmarks |
|
|