Zenki's Unite - Page 1363 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

RB25GUY · 01-07-2016, 06:05 AM

RWB s14 that was built eons ago!!!

simmode1 · 01-07-2016, 08:45 AM

^^^Too bad he doesn't market this kit off the shelf.

***CrimsonRockett*** · 01-07-2016, 10:50 AM

Quote:

Originally Posted by simmode1

Agreed, but these guys are starting to make a good case for it on S14's... Might change my mind. Some of these cars look damned good.

I was ready to go 17/18 stagger on my Kouki, unfortunately my brakes wouldn't allow it unless I got rid of my Evo Brembo's and went back to Z32 brakes.

Had to pass on really good wheels, too.

1988montecarloss · 01-07-2016, 11:15 AM

Quote:

Originally Posted by OBEEWON

It's the 17/18 stagger.

17/18 is one of the punishments God handed down from the garden of Eden/Tree of Knowlege of Good/Evil debacle along with pain in child birth.

didnt notice at first, but it still would look better lowered more IMO

chris_240sx · 01-07-2016, 04:59 PM

Quote:

Originally Posted by 1988montecarloss

didnt notice at first, but it still would look better lowered more IMO

Agreed. I don't know that he's finished with it though. In that photo, the car has no windshield.

RB25GUY · 01-08-2016, 06:46 AM

Quote:

Originally Posted by simmode1

^^^Too bad he doesn't market this kit off the shelf.

seriously its a really nice kit

OBEEWON · 01-08-2016, 07:41 AM

He could have tried harder.
17/18 looks good when you can't tell it's diameter stagger which defeats the purpose.
I looked that fact up on AskJeeves.com and confirmed it on Snopes.

Corbic · 01-08-2016, 08:46 AM

Quote:

Originally Posted by OBEEWON

He could have tried harder.
17/18 looks good when you can't tell it's diameter stagger which defeats the purpose.
I looked that fact up on AskJeeves.com and confirmed it on Snopes.

Huh?

Msg

NISR20MO · 01-08-2016, 09:55 AM

Uggghhhhhhh....My GK Tech order is shipping next week on tuesday, when it arrives the 18x11 -20 and 12 -10 setup is coming off and I should have some pics of my new set up, 18/19 stagger on the zenki soon. Wish I had made it in time to be cool with the rest of you guys on 1362: Stagger Club Page :/

1Day · 01-08-2016, 10:09 AM

Quote:

Originally Posted by NISR20MO

Uggghhhhhhh....My GK Tech order is shipping next week on tuesday, when it arrives the 18x11 -20 and 12 -10 setup is coming off and I should have some pics of my new set up, 18/19 stagger on the zenki soon. Wish I had made it in time to be cool with the rest of you guys on 1362: Stagger Club Page :/

NO! Loved the Rezax II's.

ka-titties · 01-08-2016, 12:22 PM

Quote:

Originally Posted by NISR20MO

Uggghhhhhhh....My GK Tech order is shipping next week on tuesday, when it arrives the 18x11 -20 and 12 -10 setup is coming off and I should have some pics of my new set up, 18/19 stagger on the zenki soon. Wish I had made it in time to be cool with the rest of you guys on 1362: Stagger Club Page :/

What parts are you waiting on?

OBEEWON · 01-08-2016, 01:21 PM

Quote:

Originally Posted by Corbic

Huh?

Maybe?

Msg

I should have some pics of my new set up, 18/19 stagger on the zenki soon. Wish I had made it in time to be cool with the rest of you guys on 1362: Stagger Club Page :/[/QUOTE]

What page is that?

I hate my 18/19 stagger. My OCD goes nuts.

1Day · 01-08-2016, 01:30 PM

It's in the max rubber thread.

Mister.E · 01-08-2016, 02:36 PM

Not a fan of staggered setups. Not trying to hate on anybody, just not my thing.

NISR20MO · 01-08-2016, 03:27 PM

Quote:

Originally Posted by 1Day

NO! Loved the Rezax II's.

Agreed, they are just too damn aggressive. I could hardpark them if I dialed the car in just right. But they don't net me much angle, require 20mm spacers to clear the brakes, and they aren't terribly light. The previous set up required RLCA's to be short to the max, the axles would have needed to be shortened. The fronts don't clear my anti-baller-spec wilwoods and with the 20mm spacers they are humangous and would have KAB-LITERATED the fenders under any compression.

Quote:

Originally Posted by ka-titties

What parts are you waiting on?

Rear knuckles, FLCA's, RLCA's, Offset strut tower tops. Running that with Driftworks knuckles, relocated steering rack, KTS coils, and SPL links out back.

Quote:

Originally Posted by OBEEWON

I should have some pics of my new set up, 18/19 stagger on the zenki soon. Wish I had made it in time to be cool with the rest of you guys on 1362: Stagger Club Page :/

What page is that?

I hate my 18/19 stagger. My OCD goes nuts.

I feel like you can tell 17/18 more distinctly depending on the wheel. I wouldn't mind if I could tuck a bit of a 19 out back though and still be functional. Ultimately, I want a square contact patch and I want to be able to drive the car. I really wanted the wheels I scooped, but they aren't exactly plentiful, and size wasn't really an option. The engine setup is still in process, current ride height is not final. Mounted up some 255/35 up front and 265/30 out back, tirerack has them measured as the same width patch-wise.

ka-titties · 01-09-2016, 05:30 PM

Quote:

Originally Posted by NISR20MO

Agreed, they are just too damn aggressive. I could hardpark them if I dialed the car in just right. But they don't net me much angle, require 20mm spacers to clear the brakes, and they aren't terribly light. The previous set up required RLCA's to be short to the max, the axles would have needed to be shortened. The fronts don't clear my anti-baller-spec wilwoods and with the 20mm spacers they are humangous and would have KAB-LITERATED the fenders under any compression.

Rear knuckles, FLCA's, RLCA's, Offset strut tower tops. Running that with Driftworks knuckles, relocated steering rack, KTS coils, and SPL links out back.
I feel like you can tell 17/18 more distinctly depending on the wheel. I wouldn't mind if I could tuck a bit of a 19 out back though and still be functional. Ultimately, I want a square contact patch and I want to be able to drive the car. I really wanted the wheels I scooped, but they aren't exactly plentiful, and size wasn't really an option. The engine setup is still in process, current ride height is not final. Mounted up some 255/35 up front and 265/30 out back, tirerack has them measured as the same width patch-wise.

There is ENTIRELY too much logic in this post for zilvia.

zenkiderek · 01-10-2016, 01:10 AM

Quote:

Originally Posted by miggypq21

Hey guys

Whoa. Glad to see this thread is still alive and well

Driftin Tre · 01-10-2016, 01:58 AM

Quote:

Originally Posted by ep3scott

Yum! what kit is that?!

Origin Kit

do it sideways · 01-10-2016, 07:44 AM

Somebody buy my trust rear valances, also have s14 zenki Silvia grill.

http://zilvia.net/f/showthread.php?t=620853

blksylv · 01-10-2016, 07:55 PM

DJTTon · 01-10-2016, 08:34 PM

Anyone know of any zenki front bumpers that uses the jdm kouki turn signals? Most of these pictures have the zenki turn signals

Reece · 01-10-2016, 08:40 PM

DJTTon · 01-10-2016, 08:43 PM

Reminds me of that red GTR that was crushed due to illegal paperwork ;_;

Almighty So · 01-10-2016, 09:05 PM

Quote:

Originally Posted by DJTTon

Anyone know of any zenki front bumpers that uses the jdm kouki turn signals? Most of these pictures have the zenki turn signals

2F get nuts super doof kit

Grimace · 01-10-2016, 11:08 PM

Quote:

Originally Posted by DJTTon

Anyone know of any zenki front bumpers that uses the jdm kouki turn signals? Most of these pictures have the zenki turn signals

There's a couple that use them. This is the GP-Sports kit.

ep3scott · 01-10-2016, 11:21 PM

Quote:

Originally Posted by Driftin Tre

Origin Kit

Thanks man! Been following your skids on Youtube for some time, great stuff all round. Still throwing around ideas for what kit to run on my S14..

Reece · 01-11-2016, 12:41 AM

^ neat

Dori_Labs · 01-11-2016, 06:17 AM

Couple of shots of my Silvia from over here in the U.K

Still got a couple of bits left to do before its complete

Mister.E · 01-11-2016, 02:15 PM

Dude, that hood...WTF is it?

Sent from my iPad using Tapatalk

Reece · 01-11-2016, 02:19 PM

Looks like a cut up stock hood.

Nice! One of the nicest non Japan zenkis I've seen

01-07-2016, 08:45 AM	#40862
simmode1 Post Whore! Join Date: Feb 2008 Location: Addison, TX Posts: 5,526 Trader Rating: (0) Feedback Score: 0 reviews	^^^Too bad he doesn't market this kit off the shelf. __________________ "Simplicity is the key to brilliance." - Bruce Lee

01-08-2016, 07:41 AM	#40867
OBEEWON Post Whore! Join Date: Feb 2006 Location: Hightened State of Emergency Posts: 6,053 Trader Rating: (9) Feedback Score: 9 reviews	He could have tried harder. 17/18 looks good when you can't tell it's diameter stagger which defeats the purpose. I looked that fact up on AskJeeves.com and confirmed it on Snopes. __________________

01-08-2016, 02:36 PM	#40874
Mister.E Post Whore! Join Date: Oct 2007 Location: Las Vegas Age: 39 Posts: 4,590 Trader Rating: (53) Feedback Score: 53 reviews	Not a fan of staggered setups. Not trying to hate on anybody, just not my thing. __________________ : @e_lemonation

01-11-2016, 02:15 PM	#40889
Mister.E Post Whore! Join Date: Oct 2007 Location: Las Vegas Age: 39 Posts: 4,590 Trader Rating: (53) Feedback Score: 53 reviews	Dude, that hood...WTF is it? Sent from my iPad using Tapatalk __________________ : @e_lemonation

01-08-2016, 09:55 AM	#40869
NISR20MO Zilvia Junkie Join Date: Aug 2006 Location: Raleigh NC Age: 37 Posts: 490 Trader Rating: (29) Feedback Score: 29 reviews	Uggghhhhhhh....My GK Tech order is shipping next week on tuesday, when it arrives the 18x11 -20 and 12 -10 setup is coming off and I should have some pics of my new set up, 18/19 stagger on the zenki soon. Wish I had made it in time to be cool with the rest of you guys on 1362: Stagger Club Page :/

01-08-2016, 01:30 PM	#40873
1Day Zilvia Junkie Join Date: Sep 2009 Location: Hamilton, IN Age: 41 Posts: 318 Trader Rating: (1) Feedback Score: 1 reviews	It's in the max rubber thread.

01-10-2016, 07:44 AM	#40879
do it sideways Zilvia Junkie Join Date: Aug 2010 Location: wa Age: 33 Posts: 459 Trader Rating: (7) Feedback Score: 7 reviews	Somebody buy my trust rear valances, also have s14 zenki Silvia grill. http://zilvia.net/f/showthread.php?t=620853

01-10-2016, 08:34 PM	#40881
DJTTon Zilvia Addict Join Date: Nov 2015 Location: Where the bad guys are Posts: 886 Trader Rating: (6) Feedback Score: 6 reviews	Anyone know of any zenki front bumpers that uses the jdm kouki turn signals? Most of these pictures have the zenki turn signals

01-10-2016, 08:43 PM	#40883
DJTTon Zilvia Addict Join Date: Nov 2015 Location: Where the bad guys are Posts: 886 Trader Rating: (6) Feedback Score: 6 reviews	Reminds me of that red GTR that was crushed due to illegal paperwork ;_;

01-11-2016, 06:17 AM	#40888
Dori_Labs Join Date: Jan 2016 Location: Scotland Posts: 6 Trader Rating: (0) Feedback Score: 0 reviews	Couple of shots of my Silvia from over here in the U.K Still got a couple of bits left to do before its complete