|
Chat General Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
04-10-2016, 07:15 PM | #93 |
Zilvia Member
Join Date: Jun 2009
Location: Florida / Norway
Posts: 290
Trader Rating: (7)
Feedback Score: 7 reviews
|
anyone been running the 350Z axles for awhile, and/or used them for drifting? thinking about jumping into that setup.
or does anyone have any recommendations for upgraded/reman axles? |
07-05-2016, 10:25 PM | #95 |
Post Whore!
Join Date: Apr 2006
Location: bangin on my chest Account: BANNED #fucksupreme
Age: 82
Posts: 5,932
Trader Rating: (3)
Feedback Score: 3 reviews
|
NA Z32 / Early J30 Rear Axle INNER BOOTS appear to be discontinued and NLA
Does anyone have a source for these? Inner Boot PN: 39741-03P27 Outer Boot PN: 39241-73L28 I am totally bummed about this. |
07-05-2016, 10:35 PM | #96 |
Post Whore!
|
5-bolt J30 inner and outer boots still available.
http://www.nissaninfinitiparts.com/o...iti/c9bda73l28 http://www.nissaninfinitiparts.com/o...iti/3974103p27
__________________
|
07-05-2016, 11:12 PM | #98 |
Leaky Injector
|
I had to do the runaround for a while trying to find them then found some random ad on (iirc) rock auto for a beck and arnley part number, then went to Oreilly with that part number and had them within a week. Did it a year ago and don't remember the part number. z32NA inner
__________________
LSB E46 M3. Causing my S14 to collect dust since 2009. |
07-06-2016, 09:05 AM | #99 |
Leaky Injector
|
http://www.ebay.com/itm/CV-Joint-Boo...9V3e8S&vxp=mtr Found this listing and a good beck and arnley pn
|
07-06-2016, 10:05 AM | #100 |
Nissanaholic!
|
This thread should be cleaned and sticky'd. Good info
__________________
IG DearDerekKing |
07-06-2016, 10:20 AM | #101 |
Post Whore!
Join Date: Apr 2006
Location: bangin on my chest Account: BANNED #fucksupreme
Age: 82
Posts: 5,932
Trader Rating: (3)
Feedback Score: 3 reviews
|
Only prob is that I wanted to keep with OEM since i know these boots will last decades. I have a hard time buying aftermarket. I am going to look into Japan market and see what I come up with
|
07-11-2016, 10:25 PM | #102 |
Post Whore!
Join Date: Apr 2006
Location: bangin on my chest Account: BANNED #fucksupreme
Age: 82
Posts: 5,932
Trader Rating: (3)
Feedback Score: 3 reviews
|
Wanted to bump this thread and see if anyone has rear axle lengths for the R32/R33/R34 Skyline, for both GTR and non-GTR. This would be useful info to add to this thread.
|
08-11-2016, 11:07 AM | #103 |
Nissanaholic!
Join Date: Apr 2003
Location: Austin, TX
Age: 40
Posts: 2,183
Trader Rating: (33)
Feedback Score: 33 reviews
|
Just curious....has anyone tried these out? Feedback on the setup?
http://villainsdrift.bigcartel.com/p...b-for-s13-diff |
08-11-2016, 11:16 AM | #104 | |
Premium Member
Join Date: Jun 2003
Location: torrance, ca
Age: 42
Posts: 12,685
Trader Rating: (130)
Feedback Score: 130 reviews
|
Quote:
|
|
08-11-2016, 01:37 PM | #105 |
Nissanaholic!
Join Date: Apr 2003
Location: Austin, TX
Age: 40
Posts: 2,183
Trader Rating: (33)
Feedback Score: 33 reviews
|
@BRN...thanks for the info bud. What diff setup are you running if you dont mind me asking. I found 2 sets of Z32tt axles but the going rate for them has more than tripled since I last picked up my 3.54 diff setup.
|
08-11-2016, 02:01 PM | #106 | |
Premium Member
Join Date: Jun 2003
Location: torrance, ca
Age: 42
Posts: 12,685
Trader Rating: (130)
Feedback Score: 130 reviews
|
Quote:
if you're running z32tt axles, make sure you use z32tt hubs too. tt and na are different spline size. |
|
08-11-2016, 04:04 PM | #107 | |
Post Whore!
Join Date: Oct 2007
Location: Las Vegas
Age: 39
Posts: 4,590
Trader Rating: (53)
Feedback Score: 53 reviews
|
Rear Axle Discussion
Quote:
I have them on my current setup, but my car is undriveable. They looks super stout and shouldn't pose any problems. Nate's customer service was above and beyond. +1 for the Villains Nismo 2-way in S14 diff housing 3.69 final drive SPL solid diff bushings OE z33 axles Gktech rear knuckles Contano hubs
__________________
: @e_lemonation |
|
08-11-2016, 04:13 PM | #108 |
Nissanaholic!
Join Date: Apr 2003
Location: Austin, TX
Age: 40
Posts: 2,183
Trader Rating: (33)
Feedback Score: 33 reviews
|
@BRN...thank for the info. Yeah still tossing the idea around of running another 3.54 setup in the near future. Had the setup on my Zenki which was junked. This was 3-4 years ago when I picked up my setup with TT hubs but I see the price of the Z32 TT axle is getting pretty insane.
@Mister....awesome bud once again thanks for the help. Pretty much just brain storming at this time. Would love to find another 3.54 setup if I decide to go FI with the next frankenstein build but if not just looking at other options that will provide similar strength. I never really did any drifting (on purpose) as most of my projects have been built for street and straight line action. Last edited by 2muchboost; 08-11-2016 at 07:45 PM.. |
08-11-2016, 06:25 PM | #110 |
Zilvia Member
Join Date: Nov 2014
Location: Austin, TX
Age: 38
Posts: 208
Trader Rating: (3)
Feedback Score: 3 reviews
|
Herb, those would be some sick options to 1.) get away from relying on the z32TT axle, and 2.) to run a non VLSD setup.
I think with all that I have put together, I maybe spent close to $1000 for everything (Z32TT hubs, Z32TT Dr. axle, Q45 Dr. Axle, Non ABS S13 Pumpkin, Q45 VLSD 'I think' with the 6 Star Stub axles, and 3.69 Final drive and pinion). |
08-11-2016, 06:59 PM | #111 |
Post Whore!
Join Date: Oct 2007
Location: Las Vegas
Age: 39
Posts: 4,590
Trader Rating: (53)
Feedback Score: 53 reviews
|
This was a question I had running through my mind as well. I asked them and so far they haven't had any issues with their products. With my luck I'll probably be the first victim...
__________________
: @e_lemonation |
08-11-2016, 07:38 PM | #112 |
Nissanaholic!
Join Date: Apr 2003
Location: Austin, TX
Age: 40
Posts: 2,183
Trader Rating: (33)
Feedback Score: 33 reviews
|
x2 that was my thought....everything better be perfectly spec'ed out or the first hard launch and those will become nice paper weights. Still better than the adapters I have seen around...oy vey just the thought of using them under a hard launch.
Sup Wil! Thats the thing, when I bought my 3.54 setup a few years ago I think I spent well under $450 with everything including shipping. Hell I got my first Z32TT axle for under $100 shipped from Washington State to NY. BTW if you are using the Z32TT axles and Hubs then you have the 3.54. The 3.69 (later q45 vlsd) is 5 bolt and the 3.54 (earlier q45) is 6 bolt...the 5 bolt is not compatible with Z32TT Hubs. Luckily I have some time to brainstorm but will keep up with this thread and those stubs for sure. I have been reviewing a few of the drag forums on FB to see what they are using. Since my cars have always been used in the street I could never see myself using a solid rear end enjoying it. |
08-11-2016, 08:58 PM | #113 |
Post Whore!
Join Date: Apr 2006
Location: bangin on my chest Account: BANNED #fucksupreme
Age: 82
Posts: 5,932
Trader Rating: (3)
Feedback Score: 3 reviews
|
someone should check these for runout and that they are perpendicular and centered.
and welded with a mig, no less. crazy! |
08-11-2016, 09:04 PM | #114 |
Join Date: Nov 2013
Location: three rivers,qc
Age: 41
Posts: 26
Trader Rating: (0)
Feedback Score: 0 reviews
|
Very nice for the villains stubs didnt know about these until now. I get the vibes about concerns on balance and proper welds though. What exactly you guys use for hubs z33 or s13/s14 ?
|
08-13-2016, 11:01 AM | #115 | |
Post Whore!
Join Date: Oct 2007
Location: Las Vegas
Age: 39
Posts: 4,590
Trader Rating: (53)
Feedback Score: 53 reviews
|
Quote:
If you guys know anyone in vegas that can perform these checks, I'll gladly take my stubs to their shop.
__________________
: @e_lemonation |
|
08-13-2016, 07:14 PM | #117 | |
Post Whore!
Join Date: Oct 2007
Location: Las Vegas
Age: 39
Posts: 4,590
Trader Rating: (53)
Feedback Score: 53 reviews
|
Quote:
Ah I'll look around, but if anyone has a contact that'll hook it up free of charge, let me know. The diff will be going into the car soon and I'm not concerned enough to pay someone to check it. Unfortunately I don't have any machine shop contacts of my own.
__________________
: @e_lemonation |
|
08-13-2016, 11:58 PM | #119 |
Zilvia Junkie
Join Date: Oct 2008
Location: Ottawa, Canada
Age: 34
Posts: 568
Trader Rating: (2)
Feedback Score: 2 reviews
|
Garret over at get nuts offer the same service and balanced
https://www.instagram.com/p/BFaPRPHE...rretnuts&hl=en |
08-14-2016, 08:46 AM | #120 |
Post Whore!
Join Date: Oct 2007
Location: Las Vegas
Age: 39
Posts: 4,590
Trader Rating: (53)
Feedback Score: 53 reviews
|
Rear Axle Discussion
Eat shit. I don't care enough to go get it done. If it was a major concern of mine then I wouldn't have purchased them in the first place. You guys seemed to want some info and I was willing to help since I have the parts in my possession. Since you are such an angry cunt, though, you can fuck off.
__________________
: @e_lemonation |
Bookmarks |
|
|