z32 gearbox speed sensors - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gaz_moose · 11-01-2017, 06:29 AM

^^ I put one of those Dakota digital converters on a different car I built a few years back and I could never get it to read accurately across the entire speed range. I found that If I made it accurate on the lower speeds (20/30mph) then at the upper speeds 70/100mph.

ive seen the 'jumpers' on the rear of JDM s14 dash clocks you can move to change the reading but not on the s13 clocks. I did read somewhere that s13 clocks had a potentiometer inside you could adjust but the last set of clocks I took apart broke so I was reluctant to strip these ones down.

11-01-2017, 06:29 AM	#5
gaz_moose Zilvia Member Join Date: Mar 2008 Location: engerland Posts: 242 Trader Rating: (0) Feedback Score: 0 reviews	^^ I put one of those Dakota digital converters on a different car I built a few years back and I could never get it to read accurately across the entire speed range. I found that If I made it accurate on the lower speeds (20/30mph) then at the upper speeds 70/100mph. ive seen the 'jumpers' on the rear of JDM s14 dash clocks you can move to change the reading but not on the s13 clocks. I did read somewhere that s13 clocks had a potentiometer inside you could adjust but the last set of clocks I took apart broke so I was reluctant to strip these ones down.