|
Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series. |
|
Thread Tools | Display Modes |
10-03-2022, 08:24 PM | #1 |
Help! 90 S13 stall after 2-3 mins drive wont start again Video*
I really need help! my 90 240sx has an issue, it will ran good for 1-3 minutes then start bogging and stall, push gas pedal wont make the RPM go up, it will stall no matter what.
The funny thing is i can leave the car idle for 1 hour without any issues , idles smooth, if i drive it, it will stall in about 2-3 mins and i wont start up again and i attached a video. if i wait 1 hour it will start up fine. car has new fuel pump(my fuel level sensor is not working and i put 5 gallon gas in the tank before starting the car), new spark plugs, i did a lot search and a lots people mentioned might be a MAF sensor issues, i unplugged it ,it still wont start back up https://youtu.be/GLvrP8Rablw |
|
Sponsored Links |
10-04-2022, 02:54 PM | #2 |
Premium Member
Join Date: Jun 2003
Location: torrance, ca
Age: 42
Posts: 12,685
Trader Rating: (130)
Feedback Score: 130 reviews
|
FAST
Fuel Air Spark Timing When the car wont start, you need to figure out which one of these is the failure. Does fuel pressure go away? Do you still have spark? Go do some testing and report back! |
10-05-2022, 07:07 AM | #3 |
Zilvia Junkie
|
Could be the fuel filter.
__________________
NismotronicSA - Speed-Density Tuning for Nissans |
10-08-2022, 10:27 PM | #4 |
Zilvia Addict
Join Date: Jul 2009
Location: everywhere
Age: 42
Posts: 732
Trader Rating: (1)
Feedback Score: 1 reviews
|
Did this get resolved? If not I had a very similar problem years ago, when it stalls out, unplug you coolant temp sensor and try to start it, if it starts right up, that’s what it is
|
10-09-2022, 10:33 AM | #5 |
mine turns out to no gas in the tank, and my gas gauge sensor is not working(im using D21 fuel sending unit, the floater sensor works but tanks are different height)
|
|
10-09-2022, 10:36 AM | #6 | |
Quote:
now its running on 3 cylinders , i tested the resistance it shows 13 oms i think it might be clogged, i had all 4 plugs, ordering spark plugs wires just in case |
||
Bookmarks |
|
|