Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 08-18-2005, 08:38 PM   #1
fluidmotion
 
Join Date: Nov 2004
Location: Minneapolis, MN
Posts: 35
Trader Rating: (0)
fluidmotion is an unknown quantity at this point
Feedback Score: 0 reviews
thumping when taking a left turn. New Brakes.

So, I got all new q45 rotors and used calipers with new metal matrix brake pads for the front brakes.

I got everything installed and bled the front brakes. So I took the car for a test run, slowly at first to make sure they worked. And they worked fine. There was some rubbing that you could hear, but I think that is because of the new brake pads and new rotors, if I could confirm this that would be great.

I heard that you need to do some hard braking to break in the rotors, so I started braking fairly hard. After some time, there was less rubbing on the pads, but then I could feel and hear a constant thumping under the clutch area. The wheel didn't shake, so it couldn't be anything related to alignment. The thumping would also increase the faster I drove.

I then noticed that the thumping would increase in strength when taking a left turn and decrease in strength when taking a right turn. I'm not sure what this could be, so if anyone has any ideas.

I did read on a different post that it could be the wheel weights? ....
fluidmotion is offline   Reply With Quote
Sponsored Links
Reply

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 01:26 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net