Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!* - Page 117 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SoCal-s130 · 03-03-2009, 09:40 PM

Cant wait to get 18s in the front so I can go fender to wheel all around.

dub40sx · 03-03-2009, 10:22 PM

F: 17x9 +17 -215/40/17
R: 17x9 +7 (10mm spacer)-215/40/17

Ive got my eyes set on some 18s but cant come up with the money just yet since my other wheel purchases kill me.

Need to adjust camber and toe like crazy. Gotta some how figure out how to lower the front bout 1/2" and then raise the rear up bout 1/4". Also need fenders.

dont mind the front fender gap. I pulled it a long time ago and it fucked it up quite a bit. Gonna get some origin 20mil type 1s for the front. Still deciding on either 30 or 50 rear.

pete_07 · 03-03-2009, 10:31 PM

Quote:

Originally Posted by AznDrftr.

Finally

.

OH MY! ! very nice dude

240sxdriftin · 03-03-2009, 10:38 PM

Quote:

Originally Posted by SoCal-s130

Cant wait to get 18s in the front so I can go fender to wheel all around.

shits gonna be hot for sure man!

my old s13...miss the hell out of it

nothing to special

F. 18x9.5 +5 30mm wide fenders
R 18x10 +3 rolled

BillWatcher · 03-03-2009, 11:40 PM

Quote:

Originally Posted by AznDrftr.

Finally

18x10 - 30
18x12 - 17

front - 40mm : still rub, camber like crazy
rear - 30mm bowed to fit like 50mm : not much camber, but still going to camber more.

Do you know how much camber exactly you are running in the front, I have a 2 more mm of offset and I have this in the front with 20mm fenders. I thought 40s would fit with 4.6 camber.

LMK if you find out how much you have or if it is maxed or what ever.

Someone asked for these shots, on the last page I think

Slammed180 · 03-04-2009, 08:33 AM

Quote:

Originally Posted by BillWatcher

Someone asked for these shots, on the last page I think

That would be me. Gives me hope for the wheels I'm wanting to run. Tire stretch isn't too bad either. Thanks for the pics!

AznDrftr. · 03-04-2009, 08:51 AM

Quote:

Originally Posted by Enna

Looking alot sexier than it did before in this thread. That front looks pretty good. Still not a fan of that 'pop-up style' on the fronts of coupes tho.. but thats just me.

Thanks, yea, i think it looks good tho.

Quote:

Originally Posted by pete_07

OH MY! ! very nice dude

Thanks a lot!

Quote:

Originally Posted by BillWatcher

Do you know how much camber exactly you are running in the front, I have a 2 more mm of offset and I have this in the front with 20mm fenders. I thought 40s would fit with 4.6 camber.

LMK if you find out how much you have or if it is maxed or what ever.

Someone asked for these shots, on the last page I think

Yea i can try to find out for you tho, no problem. But i can say im runnin pretty negative, around -3.5 - -4.0ish.

BillWatcher · 03-04-2009, 10:08 AM

You said you slotted your mounts. Are you maxed on your camber plates and then slotted the mount and went more? Or have you just slotted it and have not taken it that far yet?

AznDrftr. · 03-04-2009, 10:46 AM

Quote:

Originally Posted by BillWatcher

You said you slotted your mounts. Are you maxed on your camber plates and then slotted the mount and went more? Or have you just slotted it and have not taken it that far yet?

Yea, i slotted them and camber plates arent even maxed out yet. almost tho, not much of a difference if i did anyway lol

Quban.Russian mx73 · 03-04-2009, 05:13 PM

heres my junker i lack the baller wheels hahaha
starion wheels 16x8-10 all the way around
35mm spacers in the rear and 20mm in the front

93superHICAS · 03-04-2009, 08:44 PM

Quote:

Originally Posted by Quban.Russian mx73

heres my junker i lack the baller wheels hahaha
starion wheels 16x8-10 all the way around
35mm spacers in the rear and 20mm in the front

oh nice.
same set up, stock fenders. no spacers tho...

you runnin what size front fenders?

CAP'NZenki · 03-04-2009, 10:36 PM

17x10.5 +3
245/40/17 conti
roll no pull

***FaLKoN240*** · 03-04-2009, 11:15 PM

Quote:

Originally Posted by CAP'NZenki

17x10.5 +3
245/40/17 conti
roll no pull

Haha that's at The Shop, I recognize the autobody shop.

They're cool the auto interior place sucks, the owner is a dick.

Sell me those R33 wheels.

kaking · 03-04-2009, 11:33 PM

[QUOTEHaha that's at The Shop, I recognize the autobody shop.

They're cool the auto interior place sucks, the owner is a dick.

Sell me those R33 wheels.

[/QUOTE]

i recognized THE SHOP too...bought my hatch from the owner days ago

DreEzed · 03-05-2009, 12:13 AM

Ooo... just picked up a set of R33 wheels.

green_s14 · 03-05-2009, 01:05 AM

this side is higher up front, Should i go with a spacer and more camber out back? its not rubbing any out back

SlideAlliance · 03-05-2009, 01:11 AM

go lower all around and leave it how it is if it doesnt rub

ayuaddict · 03-05-2009, 03:43 AM

i didnt read what you wrote.

because that is an awesome photo.

awesome indeed.

green_s14 · 03-05-2009, 04:31 AM

thanks, credit goes to my friend kyle, this was his very first rig picture. and that picture is actually photo number 1. Should have some more soon ill post em up.

Exas Spec D · 03-05-2009, 05:17 AM

Mind if you give out the specs? I'm guessing those are Battles? What's your tire size? I really like.

leesturbo240 · 03-05-2009, 09:51 AM

heyy i need some help i have a 95 s14.. i wanna go wit the rota d2 rims which the size is 17in by 7.5 offset+25 would i have to bend or roll my fenders and my car is drop?how would dhat sit?

BillWatcher · 03-05-2009, 10:05 AM

7.5 offset+25

Thats like wearing a skirt to school on your first day of high school......

ILoveJDM · 03-05-2009, 10:10 AM

nothing wrong with that if you're a girl

Fries · 03-05-2009, 10:34 AM

^^ OOOOOH! HAHA!

Depending on the tire size you'd just have to roll the fender lip.
Very easy.

SoSideways · 03-05-2009, 10:37 AM

Quote:

Originally Posted by leesturbo240

heyy i need some help i have a 95 s14.. i wanna go wit the rota d2 rims which the size is 17in by 7.5 offset+25 would i have to bend or roll my fenders and my car is drop?how would dhat sit?

That will look like Fries' avatar picture, but in "wheels on car" form...

dori_sil8t · 03-05-2009, 10:38 AM

Quote:

Originally Posted by leesturbo240

heyy i need some help i have a 95 s14.. i wanna go wit the rota d2 rims which the size is 17in by 7.5 offset+25 would i have to bend or roll my fenders and my car is drop?how would dhat sit?

ud need at least 50mm over to tucks those bad boys

soreballz · 03-05-2009, 11:16 AM

Quote:

Originally Posted by leesturbo240

heyy i need some help i have a 95 s14.. i wanna go wit the rota d2 rims which the size is 17in by 7.5 offset+25 would i have to bend or roll my fenders and my car is drop?how would dhat sit?

You're gonna need 50mm overfenders and a LOT of camber all around to clear those giant bad boys. Ohhhh yeeeeeeeeeeeah!

EDIT: Dammit, how did somebody else beat me to the EXACT SAME THING that I was thinking. lol

Great minds think alike!

green_s14 · 03-05-2009, 11:57 AM

17x9.5 +15mm battles,
225/45 michellin pilot sports rear
225/45 federal ss595 fronts.

cc4usmc · 03-05-2009, 12:13 PM

Quote:

Originally Posted by soreballz

EDIT: Dammit, how did somebody else beat me to the EXACT SAME THING that I was thinking. lol

He posted 38 minutes before you, you're just a copy cat

99maxgtr · 03-05-2009, 12:22 PM

Quote:

Originally Posted by leesturbo240

heyy i need some help i have a 95 s14.. i wanna go wit the rota d2 rims which the size is 17in by 7.5 offset+25 would i have to bend or roll my fenders and my car is drop?how would dhat sit?

I'm going to take a wild guess and say that this your first 240.
Second i want to help you out, since this forum will flame you and make you cry with that statement.
I would first look through this page and look at everyone's fitment. 99% of everyone here runs nothing less than a 9-9.5 width.
+25 is a pretty conservative fitment especially on s14. If you want to stay stock body that would be ideal.
If i were you, and i've been on the same boat when i first got into the s-chassis, i would do more research before jumping on the first wheel that looks good to you. The last thing you want to do is regret a set of wheels shortly after, because offset and width are key, almost more than design IMO.
Good Luck.

03-03-2009, 09:40 PM	#3481
SoCal-s130 Nissanaholic! Join Date: Mar 2007 Location: Chino Posts: 1,743 Trader Rating: (4) Feedback Score: 4 reviews	Cant wait to get 18s in the front so I can go fender to wheel all around. __________________

03-04-2009, 10:08 AM	#3488
BillWatcher Zilvia Junkie Join Date: Jul 2007 Location: Bellevue, Wa Age: 40 Posts: 324 Trader Rating: (0) Feedback Score: 0 reviews	You said you slotted your mounts. Are you maxed on your camber plates and then slotted the mount and went more? Or have you just slotted it and have not taken it that far yet? __________________ http://walk2liv.blogspot.com/

03-04-2009, 05:13 PM	#3490
Quban.Russian mx73 Zilvia Addict Join Date: Jan 2008 Location: fontucky Age: 42 Posts: 702 Trader Rating: (3) Feedback Score: 3 reviews	heres my junker i lack the baller wheels hahaha starion wheels 16x8-10 all the way around 35mm spacers in the rear and 20mm in the front __________________ Violent Running Tribe if you haven't seen us youll hear us coming !

03-05-2009, 01:11 AM	#3497
SlideAlliance Zilvia Junkie Join Date: Aug 2007 Location: Newport Posts: 503 Trader Rating: (0) Feedback Score: 0 reviews	go lower all around and leave it how it is if it doesnt rub __________________ Battle Idol Works 2015

03-05-2009, 05:17 AM	#3500
Exas Spec D Zilvia Junkie Join Date: Apr 2008 Location: Union City, CA Age: 37 Posts: 449 Trader Rating: (0) Feedback Score: 0 reviews	Mind if you give out the specs? I'm guessing those are Battles? What's your tire size? I really like. __________________

03-03-2009, 10:22 PM	#3482
dub40sx Zilvia Addict Join Date: Nov 2008 Location: Canada Age: 37 Posts: 737 Trader Rating: (5) Feedback Score: 5 reviews	F: 17x9 +17 -215/40/17 R: 17x9 +7 (10mm spacer)-215/40/17 Ive got my eyes set on some 18s but cant come up with the money just yet since my other wheel purchases kill me. Need to adjust camber and toe like crazy. Gotta some how figure out how to lower the front bout 1/2" and then raise the rear up bout 1/4". Also need fenders. dont mind the front fender gap. I pulled it a long time ago and it fucked it up quite a bit. Gonna get some origin 20mil type 1s for the front. Still deciding on either 30 or 50 rear.

03-04-2009, 10:36 PM	#3492
CAP'NZenki Leaky Injector Join Date: May 2007 Location: south city Age: 35 Posts: 125 Trader Rating: (0) Feedback Score: 0 reviews	17x10.5 +3 245/40/17 conti roll no pull

03-04-2009, 11:33 PM	#3494
kaking Users Awaiting Email Confirmation Join Date: Apr 2007 Location: san jose CA Posts: 433 Trader Rating: (7) Feedback Score: 7 reviews	[QUOTEHaha that's at The Shop, I recognize the autobody shop. They're cool the auto interior place sucks, the owner is a dick. Sell me those R33 wheels. [/QUOTE] i recognized THE SHOP too...bought my hatch from the owner days ago

03-05-2009, 12:13 AM	#3495
DreEzed Users Awaiting Email Confirmation Join Date: Apr 2007 Location: West Los Angeles Posts: 1,725 Trader Rating: (15) Feedback Score: 15 reviews	Ooo... just picked up a set of R33 wheels.

03-05-2009, 01:05 AM	#3496
green_s14 Join Date: Jan 2007 Location: Greensboro, nc. Posts: 25 Trader Rating: (0) Feedback Score: 0 reviews	this side is higher up front, Should i go with a spacer and more camber out back? its not rubbing any out back

03-05-2009, 03:43 AM	#3498
ayuaddict Post Whore! Join Date: Jan 2006 Location: Socal Age: 35 Posts: 4,017 Trader Rating: (9) Feedback Score: 9 reviews	i didnt read what you wrote. because that is an awesome photo. awesome indeed.

03-05-2009, 04:31 AM	#3499
green_s14 Join Date: Jan 2007 Location: Greensboro, nc. Posts: 25 Trader Rating: (0) Feedback Score: 0 reviews	thanks, credit goes to my friend kyle, this was his very first rig picture. and that picture is actually photo number 1. Should have some more soon ill post em up.

03-05-2009, 09:51 AM	#3501
leesturbo240 Join Date: Mar 2008 Location: jacksonville FL Age: 34 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	heyy i need some help i have a 95 s14.. i wanna go wit the rota d2 rims which the size is 17in by 7.5 offset+25 would i have to bend or roll my fenders and my car is drop?how would dhat sit?

03-05-2009, 10:05 AM	#3502
BillWatcher Zilvia Junkie Join Date: Jul 2007 Location: Bellevue, Wa Age: 40 Posts: 324 Trader Rating: (0) Feedback Score: 0 reviews	7.5 offset+25 Thats like wearing a skirt to school on your first day of high school...... __________________ http://walk2liv.blogspot.com/

03-05-2009, 10:10 AM	#3503
ILoveJDM Nissanaholic! Join Date: Jul 2006 Location: SK Canada! Posts: 1,947 Trader Rating: (27) Feedback Score: 27 reviews	nothing wrong with that if you're a girl

03-05-2009, 10:34 AM	#3504
Fries Zilvia FREAK! Join Date: May 2007 Location: Texas/or/Afghanistan Age: 36 Posts: 1,514 Trader Rating: (3) Feedback Score: 3 reviews	^^ OOOOOH! HAHA! Depending on the tire size you'd just have to roll the fender lip. Very easy. __________________

03-05-2009, 11:57 AM	#3508
green_s14 Join Date: Jan 2007 Location: Greensboro, nc. Posts: 25 Trader Rating: (0) Feedback Score: 0 reviews	17x9.5 +15mm battles, 225/45 michellin pilot sports rear 225/45 federal ss595 fronts.