10-22-2016, 09:22 AM | #3721 |
Zilvia FREAK!
|
i need quick answers before go buy wheels today. i googled online and here. no one wrote an info about 18x9 +38 on s13 (stock susps). is it bad fitment? Or should i go with stock NA 300zx 16in wheels for a while?
__________________
|
Sponsored Links |
10-22-2016, 08:13 PM | #3722 |
Zilvia Member
|
I have a set of nismo lmgt2 wheels, fronts are 17x7 + 25, rears are 17x8 +38. I plan on using the 17x8 in the front and having the 17x7 re-barreled. My question is what size barrel should I get to fit on my s14 with rear charge speed 50mm over fenders? Sorry if this question makes no sense or has been asked before but thanks for the advice in advance.
__________________
under cover brother |
10-22-2016, 11:45 PM | #3723 |
Zilvia FREAK!
Join Date: Jan 2014
Location: Ny
Age: 27
Posts: 1,057
Trader Rating: (13)
Feedback Score: 13 reviews
|
Well. Keeping those 17x8s and than asking what barrel you should get for your rear with 50mm overs osnt gonna yield a nice fitment lol its gonna be disproportioned. If i were you i wouldnt get barrels i would get new lips. Youll have more options and better fitment.
|
10-23-2016, 02:26 PM | #3724 | |
Leaky Injector
|
Quote:
__________________
WTB: Dual Projector OR Brick Headlights |
|
10-26-2016, 02:28 PM | #3725 |
Zilvia Addict
Join Date: Jul 2012
Location: California
Age: 41
Posts: 740
Trader Rating: (14)
Feedback Score: 14 reviews
|
Wheel Fitment Question Thread
I know I'm asking for some spoon-fed information... but I have spent hours looking at pics and data and still don't have the answer nor enough knowledge on wheels and tires to make the right choice. For these wheels "if I bought them" what would be best tire size? From my research 225/40 up front and 245/45 rear? This would be with a 2" drop all around, guess there is no way around rolling fenders. Last edited by sentradude; 02-21-2017 at 03:39 PM.. |
10-26-2016, 04:46 PM | #3727 | |
Nissanaholic!
|
Quote:
You're asking us to eyeball millimeters over the Internet..... They look like shit offset and ass you lower you Gain camber, your tire will look doofy and not be flush.
__________________
MRP Manufacturing |
|
10-26-2016, 05:02 PM | #3729 | |
Zilvia Addict
Join Date: Jul 2012
Location: California
Age: 41
Posts: 740
Trader Rating: (14)
Feedback Score: 14 reviews
|
Wheel Fitment Question Thread
Quote:
I measured it and came up with 40+ (I think I did it correctly) but if that was true then as some said they would look sunken in, which they really don't. S14 subframe and arms will push them out more than now and 2" drop knuckles will keep camber where it is which makes me believe I'll be close to flush? Thanks for your input. Sent from my iPhone using Tapatalk |
|
10-26-2016, 05:08 PM | #3730 |
Nissanaholic!
|
As you lower the car they become sunk
__________________
MRP Manufacturing |
10-26-2016, 05:29 PM | #3732 |
Zilvia Addict
Join Date: Jul 2012
Location: California
Age: 41
Posts: 740
Trader Rating: (14)
Feedback Score: 14 reviews
|
Wheel Fitment Question Thread
TheRealSy90 - correct, but KAT-PWR stated that I would gain camber while lowering the car, but not in my situation because of the drop knuckles.
Correction, just double checked and they are 35+ so another 5mm on the s14 frame should bring the rears to 30+? Last edited by sentradude; 10-27-2016 at 11:08 AM.. |
10-28-2016, 02:26 PM | #3733 |
Zilvia Member
|
Okay guys I have a s13 w/ feal coilovers and rolled fenders no pull. I'm thinking about purchasing a set ESR wheels 17x8.5 +30 and 18x9.5 +35. Would those rims sit just inside the fenders front and rear?
|
10-28-2016, 10:56 PM | #3738 |
Zilvia Addict
Join Date: Apr 2014
Location: Milwaukee
Age: 34
Posts: 815
Trader Rating: (11)
Feedback Score: 11 reviews
|
^ the fn01rc's for sure, those other ones are pretty terrible. However, there's no shame in running stock wheels until you can save up and buy some nice wheels. Just saying
|
10-29-2016, 12:05 PM | #3740 |
Post Whore!
Join Date: Aug 2005
Location: Norcal
Age: 38
Posts: 3,321
Trader Rating: (15)
Feedback Score: 15 reviews
|
Hello,
I have a pair of wheels i plan on relipping and they're normal/lo disk. Does it matter if I run them as spares for the rear? I've read the disk type is either front or rear due to the concave of the face. It might've answered my own question but I want opinions from people who have them as rear spares.
__________________
|
10-29-2016, 12:21 PM | #3741 |
Zilvia Junkie
Join Date: May 2012
Location: Wilson, NC
Age: 29
Posts: 340
Trader Rating: (4)
Feedback Score: 4 reviews
|
As long as the brake calipers clear your specific wheel, you can run them where ever you want regardless of disk type. Often times people will say high or normal disk for front and super low disk for rear because its easier to buy wheels that way to ensure they wont rub on the brakes. Since you have the wheels, just chuck them on to see the clearance but you definitely shouldn't have any issues.
__________________
Follow me on Instagram or don't @cason880 |
10-29-2016, 01:12 PM | #3742 | |
Post Whore!
Join Date: Aug 2005
Location: Norcal
Age: 38
Posts: 3,321
Trader Rating: (15)
Feedback Score: 15 reviews
|
Quote:
__________________
|
|
11-09-2016, 10:03 PM | #3743 |
Leaky Injector
Join Date: Jul 2013
Location: NorCal
Age: 35
Posts: 124
Trader Rating: (8)
Feedback Score: 8 reviews
|
I need to know if ill run into the coil over i know that with a 6" barrel on a o disk vsxx with 4" =+19 on a 17x10 according to the specs from crimsonrocket's old vsxx he had in 18" they are +20 same lip and barrels I've seen now mine are 9.5 +15 o disk 4" lip 5.5" barrel now i know broadfield has run 18x10+45 my question was since a 6" barrel would make mine a +20 can i add a 7" thinking that 3" lip with a 7" barrel would be 18x10+45 with the o disk but im actually im using the original 4" lip what would the offset be now i know 18x11+30 fit that what im going for trying to fit them like silviaks2nr he has them like that just rolled with 295/30/18 now i think a 4" lip with a 7" barrel on a A disk = 18x11+25 and venicedrift says the difference between A and O disk is 7mm so i think it should be 18x11+32 now is that correct and if it is do you guys think they will rub thanks in advance I've been searching and asking people
|
11-10-2016, 09:59 AM | #3745 |
Leaky Injector
Join Date: Jul 2013
Location: NorCal
Age: 35
Posts: 124
Trader Rating: (8)
Feedback Score: 8 reviews
|
Honestly don't know where ,. Go sorry i just wanted to know i should of just said does a 7" barrel on a O disk vsxx with a 4" lip = 18x11+32 and will those 2mm be an issue since i know 18x11+30 fit with a 295/30/18 thanks for your input now if some one with experience could chime in
|
11-20-2016, 08:37 PM | #3746 |
Join Date: Nov 2016
Location: Middletown nj
Age: 27
Posts: 26
Trader Rating: (0)
Feedback Score: 0 reviews
|
Hey guys I have a s13 vert with a silvia front end with stock front fenders and cts-v big brake kit with megan coilovers. I know i need 18 inch wheels but im not sure of the width and offset i need to clear the brakes and the coilovers in the front. I know im going to have to roll the fenders but i dont want to pull them. Anyone that has a similar setup would be a big help. Im thinking of ordering some wheels on black friday. Thanks!
Last edited by Pniles856; 11-20-2016 at 09:16 PM.. |
11-20-2016, 09:11 PM | #3747 |
Zilvia Member
|
So im going to be a noob and not care.
I have a set of VS-XX 17x8+22 and 17x7+22 17x8+22 has a 5.5" barrel, with a 2.5" Lip 17x7+22 has a 5" barrel and 2" lip Now im going to be relipping them with 3.5" lips so if my math is correct i would end up with these specs- 17x8.5 +3 and 17x9 +9 Feel free to call me an ass but thats what i got after using some equation i found on a stance forum. ever 1/2" of lip added would equal something like 6.35mm of offset? http://www.stanceworks.com/forums/showthread.php?t=3145 that would be where i found my information. |
11-20-2016, 09:12 PM | #3748 |
Zilvia Member
|
So im going to be a noob and not care.
I have a set of VS-XX 17x8+22 and 17x7+22 17x8+22 has a 5.5" barrel, with a 2.5" Lip 17x7+22 has a 5" barrel and 2" lip Now im going to be relipping them with 3.5" lips so if my math is correct i would end up with these specs- 17x8.5 +3 and 17x9 +9 Feel free to call me an ass but thats what i got after using some equation i found on a stance forum. ever 1/2" of lip added would equal something like 6.35mm of offset? http://www.stanceworks.com/forums/showthread.php?t=3145 that would be where i found my information. |
11-20-2016, 10:25 PM | #3749 |
Nissanaholic!
|
|
11-21-2016, 12:23 AM | #3750 |
Join Date: Jul 2016
Location: Las Vegas
Age: 27
Posts: 16
Trader Rating: (1)
Feedback Score: 1 reviews
|
Hey guys I just bought some XXR's 527 17x9.75 with 25mm offset.They are for my 97 s14 From everything that I've read it seems I'll need 10mm spacers for the front wheels. My car is bone stock. What size tires would you guys recommend? Thanks ahead of time for your help!!!
|
Bookmarks |
|
|