Zenki's Unite - Page 1392 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

89fastback · 12-20-2016, 11:30 PM

From tonight after first drive with new engine

Malik · 12-20-2016, 11:50 PM

that intake is feircesome

89fastback · 12-21-2016, 12:01 PM

Factory vette intake fits almost perfect between the headlights and clears the silvia grill

Sent from my SM-G920T using Tapatalk

Trap Star · 12-22-2016, 02:41 PM

Undergoing surgery. Car is a 97 but I have a Zenki front on it for the time being. Should be able to finish up the engine/trans work pretty quick once I start my new job.

1on1 · 12-23-2016, 09:37 AM

I maxed out the front once I installed my new arms and I still need to adjust the rear height so it's not in drag stance (or whatever you want to call it).

deolio · 12-23-2016, 10:30 AM

type 2 overs are the worst things ever. that line in them doesn't flow at all. would be sooooooooo much cooler with takidashi

1on1 · 12-23-2016, 11:50 AM

I know what you mean but I think it's going to work once I get my dmax wing and roof wing installed. Plus, the stock body line follows through from the front to the rear.

hellaslows13 · 12-23-2016, 02:44 PM

Quote:

Originally Posted by 1on1

I maxed out the front once I installed my new arms and I still need to adjust the rear height so it's not in drag stance (or whatever you want to call it).

https://scontent-dft4-1.cdninstagram...04193792_n.jpg

good shit lowney. i gotta holla @ you when im down in socal

Evan_ · 12-23-2016, 02:52 PM

Where dem 18's at, need some in my life lmao

drifting

YOSHIKOUKI · 12-23-2016, 03:06 PM

Quote:

Originally Posted by 1on1

I maxed out the front once I installed my new arms and I still need to adjust the rear height so it's not in drag stance (or whatever you want to call it).

Nice...wat arms do u have i need lil more camber n more low

Sent from my SM-N900T using Tapatalk

sil14zenki · 12-23-2016, 03:11 PM

Finally almost ready for paint

Bn sports typeIII

YOSHIKOUKI · 12-23-2016, 03:12 PM

Quote:

Originally Posted by sil14zenki

Finally almost ready for paint

Bn sports typeIII

New color?

Sent from my SM-N900T using Tapatalk

sil14zenki · 12-23-2016, 03:22 PM

Similar grey but no more two tone

Malik · 12-23-2016, 03:37 PM

SHOCKLATE! · 12-23-2016, 04:16 PM

I need some wheels and paint bad.

Sent from my iPhone using Tapatalk

1on1 · 12-23-2016, 08:26 PM

Quote:

Originally Posted by hellaslows13

good shit lowney. i gotta holla @ you when im down in socal

Thanks man! Honestly, I have a job opportunity back in the bay. If I get accepted, I'll be moving back and hopefully attend some Club Drift events.

Quote:

Originally Posted by Evan_

Where dem 18's at, need some in my life lmao

Works9

So good! I wish I kept mine as a back-up kit.

Quote:

Originally Posted by YOSHIKOUKI

Nice...wat arms do u have i need lil more camber n more low

For the fronts: I am running PBM FLCA/tension rod setup, PBM eccentric bushings, PBM inner tie rods (stock outers), and their rack spacers.
Rears: PBM ruca, PBM toe, and GSP traction (they're the PBM copies).

EDIT: I noticed we have the same grill. Remove the Silvia sign and it looks a lot better; imho. I'll post up once I get the correct height on my car sometime today.

Quote:

Originally Posted by sil14zenki

Bn sports typeIII

Too good, I wish I had loot to drop on BN Sports aero.

Quote:

Originally Posted by SHOCKLATE!

I need some wheels and paint bad.

Just wait and save for the wheels you really want.

slow_sr20 · 12-25-2016, 11:50 AM

I've gotten everything to build projector headlights....I've seen people who trim out the clear lenses with black paint?- I assume, or is it vinyl, plasti-dip? Any input? Also, for those who have done it, do you trim the inside of the lens, or outside?

yomisiu · 12-25-2016, 05:25 PM

old pic of mine. i taped off about an inch from the front, scuffed and spray painted around the entire outside of the headlight and the flat parts inside the JDM housing.

Russianred · 12-26-2016, 11:37 AM

^ I remember doing something similar with a CD5 accord. Remember, the outcome is in the prep-work. If you tape off meticulously and take your time, they will come out nice

.

Dan507 · 12-26-2016, 11:54 AM

My Navan

datboibrad · 12-26-2016, 10:34 PM

Quote:

Originally Posted by slow_sr20

I've gotten everything to build projector headlights....I've seen people who trim out the clear lenses with black paint?- I assume, or is it vinyl, plasti-dip? Any input? Also, for those who have done it, do you trim the inside of the lens, or outside?

do the outside to prevent getting over spray on the front of the lense on the inside where it's harder to clean. Yes you can use paint.

erik05v · 12-27-2016, 03:35 PM

Been lagging on getting it put back together after paint but finally almost done

YOSHIKOUKI · 12-29-2016, 01:17 PM

Is ur lip molded ^^^

Sent from my SM-N900T using Tapatalk

erik05v · 12-29-2016, 04:34 PM

Quote:

Originally Posted by YOSHIKOUKI

Is ur lip molded ^^^

Sent from my SM-N900T using Tapatalk

No but picture makes it look like it is

bshotts · 12-30-2016, 11:20 AM

Quote:

Originally Posted by erik05v

No but picture makes it look like it is

Could you drop a link to the exact Type R lip you installed. From all my research seems like it's the JDM only ITR lip that wraps all the way around and not USDM.

Sent from my iPhone using Tapatalk

YOSHIKOUKI · 12-30-2016, 11:28 AM

Quote:

Originally Posted by bshotts

Could you drop a link to the exact Type R lip you installed. From all my research seems like it's the JDM only ITR lip that wraps all the way around and not USDM.

Sent from my iPhone using Tapatalk

Yeah true my usdm doesnt fit my navan but from my searching i thought that it was in reverse usdm fits navan and jdm itr fits navan rep

Sent from my SM-N900T using Tapatalk

erik05v · 12-30-2016, 04:26 PM

Quote:

Originally Posted by bshotts

Could you drop a link to the exact Type R lip you installed. From all my research seems like it's the JDM only ITR lip that wraps all the way around and not USDM.

Sent from my iPhone using Tapatalk

its a cheap ebay one
http://www.ebay.com/itm/ITR-Urethane...item4aeb187fbc

Quote:

Originally Posted by YOSHIKOUKI

Yeah true my usdm doesnt fit my navan but from my searching i thought that it was in reverse usdm fits navan and jdm itr fits navan rep

Sent from my SM-N900T using Tapatalk

fitment on the sides isn't great at all would need to extend to get it fitting right

HGs14 · 12-30-2016, 11:13 PM

Baby smoke

12-19-2016, 02:59 AM	#41731
smashed Zilvia Member Join Date: Jul 2009 Location: New Zealand Age: 36 Posts: 216 Trader Rating: (0) Feedback Score: 0 reviews	__________________ Hero Prints - Celebrate the Legendary

12-22-2016, 02:41 PM	#41736
Trap Star Zilvia Junkie Join Date: Jan 2008 Location: ATL/Sylva, NC Age: 36 Posts: 409 Trader Rating: (0) Feedback Score: 0 reviews	Undergoing surgery. Car is a 97 but I have a Zenki front on it for the time being. Should be able to finish up the engine/trans work pretty quick once I start my new job. __________________ 86 300zx/90 240sx/97 240sx/96 LS400/03 350z -Shake N' Break Racing-

12-23-2016, 09:37 AM	#41737
1on1 Post Whore! Join Date: Aug 2005 Location: Norcal Age: 38 Posts: 3,321 Trader Rating: (15) Rides Gallery: 1on1 Feedback Score: 15 reviews	I maxed out the front once I installed my new arms and I still need to adjust the rear height so it's not in drag stance (or whatever you want to call it). __________________ instagram

12-23-2016, 10:30 AM	#41738
deolio Post Whore! Join Date: Mar 2007 Location: Sacramento, CA Age: 35 Posts: 4,694 Trader Rating: (13) Rides Gallery: deolio Feedback Score: 13 reviews	type 2 overs are the worst things ever. that line in them doesn't flow at all. would be sooooooooo much cooler with takidashi __________________

12-23-2016, 11:50 AM	#41739
1on1 Post Whore! Join Date: Aug 2005 Location: Norcal Age: 38 Posts: 3,321 Trader Rating: (15) Rides Gallery: 1on1 Feedback Score: 15 reviews	I know what you mean but I think it's going to work once I get my dmax wing and roof wing installed. Plus, the stock body line follows through from the front to the rear. __________________ instagram

12-19-2016, 09:50 PM	#41732
oldschoolsilvia Zilvia Member Join Date: Feb 2007 Location: Richardson, TX Age: 35 Posts: 237 Trader Rating: (3) Feedback Score: 3 reviews

12-20-2016, 11:30 PM	#41733
89fastback Zilvia Junkie Join Date: May 2007 Location: Arizona Posts: 315 Trader Rating: (0) Feedback Score: 0 reviews	From tonight after first drive with new engine

12-20-2016, 11:50 PM	#41734
Malik Nissanaholic! Join Date: Jun 2013 Location: Queens, NY Posts: 1,796 Trader Rating: (0) Feedback Score: 0 reviews	that intake is feircesome

12-21-2016, 12:01 PM	#41735
89fastback Zilvia Junkie Join Date: May 2007 Location: Arizona Posts: 315 Trader Rating: (0) Feedback Score: 0 reviews	Factory vette intake fits almost perfect between the headlights and clears the silvia grill Sent from my SM-G920T using Tapatalk

12-23-2016, 02:52 PM	#41741
Evan_ Leaky Injector Join Date: Nov 2014 Location: Jax Posts: 95 Trader Rating: (3) Feedback Score: 3 reviews	zenkigang Where dem 18's at, need some in my life lmao drifting Last edited by Evan_; 12-23-2016 at 03:02 PM.. Reason: added pics

12-23-2016, 03:11 PM	#41743
sil14zenki Zilvia Addict Join Date: Aug 2010 Location: i'm just livin Posts: 748 Trader Rating: (25) Feedback Score: 25 reviews	Finally almost ready for paint Bn sports typeIII __________________ @andymcfly

12-23-2016, 03:22 PM	#41745
sil14zenki Zilvia Addict Join Date: Aug 2010 Location: i'm just livin Posts: 748 Trader Rating: (25) Feedback Score: 25 reviews	Similar grey but no more two tone __________________ @andymcfly

12-23-2016, 03:37 PM	#41746
Malik Nissanaholic! Join Date: Jun 2013 Location: Queens, NY Posts: 1,796 Trader Rating: (0) Feedback Score: 0 reviews

12-23-2016, 04:16 PM	#41747
SHOCKLATE! Leaky Injector Join Date: May 2013 Location: Richmond CA Posts: 103 Trader Rating: (1) Feedback Score: 1 reviews	I need some wheels and paint bad. Sent from my iPhone using Tapatalk

12-25-2016, 11:50 AM	#41749
slow_sr20 Zilvia Addict Join Date: Aug 2005 Location: dayton, oh Posts: 723 Trader Rating: (13) Feedback Score: 13 reviews	I've gotten everything to build projector headlights....I've seen people who trim out the clear lenses with black paint?- I assume, or is it vinyl, plasti-dip? Any input? Also, for those who have done it, do you trim the inside of the lens, or outside?

12-25-2016, 05:25 PM	#41750
yomisiu Nissanaholic! Join Date: Oct 2010 Location: St. Pete, FL Posts: 1,675 Trader Rating: (16) Feedback Score: 16 reviews	old pic of mine. i taped off about an inch from the front, scuffed and spray painted around the entire outside of the headlight and the flat parts inside the JDM housing.

12-26-2016, 11:37 AM	#41751
Russianred Join Date: Feb 2012 Location: USA Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	^ I remember doing something similar with a CD5 accord. Remember, the outcome is in the prep-work. If you tape off meticulously and take your time, they will come out nice .

12-26-2016, 11:54 AM	#41752
Dan507 Join Date: Jul 2014 Location: England Age: 31 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	My Navan

12-27-2016, 03:35 PM	#41754
erik05v BANNED Join Date: Oct 2007 Location: LA Posts: 485 Trader Rating: (9) Feedback Score: 9 reviews	Been lagging on getting it put back together after paint but finally almost done

12-29-2016, 01:17 PM	#41755
YOSHIKOUKI Zilvia Addict Join Date: Jun 2012 Location: TUSTIN, CA Age: 40 Posts: 609 Trader Rating: (3) Feedback Score: 3 reviews	Is ur lip molded ^^^ Sent from my SM-N900T using Tapatalk

12-30-2016, 11:13 PM	#41760
HGs14 Leaky Injector Join Date: May 2013 Location: San Antonio Posts: 95 Trader Rating: (1) Feedback Score: 1 reviews	Baby smoke