IL FS: Complete S15 SR/6-Spd, Full-Race 3076R, PowerFC, Tial, Blitz, Greddy, Toda, Earls

[Broadfield]

Originally Posted by bb4_96

blow off valve looks like a tial.

Yeah, I know what I got man

Besides, it's posted right in the list what it is.

Originally Posted by bb4_96

Which pulleys are included for $100? I can only see the water pump pulley. Is the wp pulley overdriven?

Thanks

It's the standard 3-piece Greddy set: Water, alternator and power steering.

[D.Adams]

I hate to watch this get parted out but i know whatever you build after this set up will be fucking epic.



Dibs on

Greddy oil pan
Greddy aluminum pulleys
Splitfire coil packs
PE Kevlar belts
Billet oil filter relocate
Samco radiator hoses
Tomei rocker arm stoppers

[koharatx]

NOOO!!! I just read the article on your car in Modified yesterday!

I'm deployed in Afghanistan and recently bought a 1993 240SX coupe, in white ahaha! It is in "incomplete SR20 swap" phase. It's mostly done, but I need to complete it.

It's a shame to see such a clean build get pulled apart, but I'm a huge fan of the LS engine as well! I bet your new build will be sick!

I wish I could buy this, but it's just not possible right now. People are already calling dibs on things I'm interested in, but just in case, here's what I'm interested in:

Radiator
Pullies
Intake filter
Either Downpipe (one or the other)
Dump tube
BOV
Injectors
Cams
Valve Springs
Belts
Retainers
Rocker arm Stoppers
Oil filter relocate
Intake/hot/cold piping
FPR w/filter

Sorry, it's most of the small stuff. I would guess you would sell some of this by the time you get to me, so let me know what's left if it comes down to parting out the build. Good luck with the sale, and good luck with your next build!

[koharatx]

By the way, why did it cost so much for hose and AN fittings?

I destroy those things day in/day out for the Army. I'm a hydraulics mechanic :-P

I know they're expensive, especially when you get to -16 size fittings and such. But for what I'm guessing is mostly -6? Holy crap!

[1gr8bar10der]

An epic FS thread LOL. Subscribe!

[Broadfield]

Originally Posted by koharatx

By the way, why did it cost so much for hose and AN fittings?

I destroy those things day in/day out for the Army. I'm a hydraulics mechanic :-P

I know they're expensive, especially when you get to -16 size fittings and such. But for what I'm guessing is mostly -6? Holy crap!

Well, even -4 braided nylon hose is $10/ft. The -10 swivel 90 degree ends like on the valve cover are $25 each for example. So it easily adds up. And to be honest with you, I actually spent more than what I posted on all of the AN stuff.

[koharatx]

Originally Posted by Broadfield

Well, even -4 braided nylon hose is $10/ft. The -10 swivel 90 degree ends like on the valve cover are $25 each for example. So it easily adds up. And to be honest with you, I actually spent more than what I posted on all of the AN stuff.

Hmm... sounds about right. I guess I just never realized how much it was to plumb a complete car. I did notice you used Earl's for all your AN stuff. IIRC, Goodrich actually supplies Earl's.

Sorry, I don't want to clutter your sale thread. But whoever buys those lines is getting a hell of a deal. Actually, anyone who picks anything up here, whether it's the full setup or a few pieces should be very happy when all's said and done!

[drifter_for_life06]

I'll take the injectors if u part out. Good luck selling.

[greenman100]

Interested in Greddy 4” intake filter and pipe/coupler.

[rawkusx187]

I'm sure it will be a bitch to get some to buy as a package but im interested in the Tial bov and WG. Hit me up incase you decide soon.

[ROOSEY]

absolutely incredible package just saw the latest mag and all i can say is WOW im crying on the inside becuase of how badly i want this motor in my vert glws. someone is going to be a very very happy buyer. im also watching your LS build thread good luck with it all man!

[fearlessKouki]

I'll take the oil filter relocation kit, hot side And cold side intercooler piping! Please let me know if u part out and btw u have best looking engine bay!

[fearlessKouki]

I'll also take Toda camshaft, Toda Valve springs, BC retainers, TOmie rocker arm stopper. Thanks

[kyles1988]

Pretty sure that IF it does come down to parting out, he's not going to be parting out every single engine component. IE: the engine will be a complete longblock with cams/retainers/pistons/any other request along those lines.

Correct me if I'm wrong Tob.

[fearlessKouki]

I'm pretty sure if he posted to sell those in part out list then he will. but it's up to him

[Broadfield]

Originally Posted by fearlessKouki

I'm pretty sure if he posted to sell those in part out list then he will. but it's up to him

As Kyle stated, this is not a part out list. This is a list to show what parts are included in the entire package. I have a used price listed next to each item to illustrate how I came up with a package price. If this does not sell within a couple months, then I will make a new thread(s) to part out the setup. However, I will not be parting out engine internals, pulleys etc. Those will need to go with the motor seeing as I do not really have any of the OEM parts left over.

[Cannonblaster]

Great! i finally have something to refinance my house!!!!!
GLWS hope someone buys in bulk.. but not me!

[sidewaysil80]

I know you said you wouldn't part out the engine...but how would you feel about selling the 6spd transmission? i'd like to keep an extra in case mine ever shits the bed...

[Broadfield]

Originally Posted by sidewaysil80

I know you said you wouldn't part out the engine...but how would you feel about selling the 6spd transmission? i'd like to keep an extra in case mine ever shits the bed...

Yes, I would part the transmission from the engine.

[nissangtr1]

Interested in complete intake mani when ur ready to part out.

[sidewaysil80]

Originally Posted by Broadfield

Yes, I would part the transmission from the engine.

awesome! please pm if/when you decide to do the partout. thanks.

p.s.
did you get my pm

[Dude4253]

Do you have pictures of the short shifter? (i can only assume it's pretty quality)
I dont know what everyone has already "dibs" but if I would be interested in these parts:
Greddy 4” intake filter
Custom 4” intake pipe
Splitfire coil packs
Toda 264 cams
Toda valve springs
Tomei rocker arm stoppers
T1 crankcase breather box
Aeromotive fuel pressure regulator w/Earls inline fuel filter
Custom short throw shifter w/titanium shift knob
Golden Eagle vacuum box

[kyles1988]

please read before posting.

[xpertsnowcarver]

Originally Posted by Broadfield

Yes, I would part the transmission from the engine.

In which case, please sell me your driveshaft. I'm ready to purchase it.

[Wake]

Toby I will take your entire vacuum setup and probably most of the -AN lines when you decide to part.

Honestly hate to see it go I m almost willing to donate another chassis for your build so you dont take this one apart. It needs to be in the Nissan museum or something.

[RickyS13.]

Hate to see this setup go, it was one of my favs.

On the plus side, LS3 coming

[chiboy002]

dibs for the oil relocation as well lol

[Imarvin240]

i loved the article on this, such a great and well built car. also, you do some great custom gauge work...il probably send you a message tonight about that too. if you do end up parting it out, please keep me in mind for these parts.

Golden Eagle vacuum box
Blitz twin disc clutch/flywheel
Greddy radiator
T1 crankcase breather box

good luck with the sale and the next build, im sure it will be amazing when its all completed

[240sr20swap]

how much for short shifter shipped 61820 PM me

[Broadfield]

Originally Posted by WakeBHR

Toby I will take your entire vacuum setup and probably most of the -AN lines when you decide to part.

Noted!

Originally Posted by xpertsnowcarver

In which case, please sell me your driveshaft. I'm ready to purchase it.

Noted!

Originally Posted by Imarvin240

i loved the article on this, such a great and well built car. also, you do some great custom gauge work...il probably send you a message tonight about that too. if you do end up parting it out, please keep me in mind for these parts.

Golden Eagle vacuum box
Blitz twin disc clutch/flywheel
Greddy radiator
T1 crankcase breather box

good luck with the sale and the next build, im sure it will be amazing when its all completed

Dibs has already been called on the vacuum box and breather box. But you are good on the clutch and radiator.

EDIT: I went back and noticed someone called dibs on the radiator. So if they back out you are second on the list.

Originally Posted by 240sr20swap

how much for short shifter shipped 61820 PM me

I may not part the short shifter unless you have an OEM one to give me. You do realize this is for a 6-speed?