Equal Length Intake Manifold - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

luke91 · 09-30-2002, 09:13 PM

Why has no one ever designed an intake manifold with equal length, tubular runners and no plenum?  

Picture a tubular, stainless turbo manifold.  Replace the flange for the turbo with a throttle body, and you're getting close.  Now, find a place for the fuel rain and injectors, a few vacuum lines, and bolt it to the intake side of the head(s), and there you are!!

Of course it would look slightly different, but you get the picture.  

Get it?  

Let's have some opinions...

--luke

09-30-2002, 09:13 PM	#1
luke91 Zilvia Member Join Date: Sep 2002 Location: Pittsburgh, PA Age: 44 Posts: 218 Trader Rating: (0) Feedback Score: 0 reviews	Why has no one ever designed an intake manifold with equal length, tubular runners and no plenum?   Picture a tubular, stainless turbo manifold.  Replace the flange for the turbo with a throttle body, and you're getting close.  Now, find a place for the fuel rain and injectors, a few vacuum lines, and bolt it to the intake side of the head(s), and there you are!! Of course it would look slightly different, but you get the picture.   Get it?   Let's have some opinions... --luke __________________ '91 fastback.  '97 S13 blktop SR20DET.  Cstm Frnt Mnt IC w/ cstm 2 1/2" piping.  stnls stl fltr.  3" cstm DP & exhst w/N1 muff.  Walbro FP.  ACT 6 pck cltch.  Go Fast Bits crnk plly.  Ground Control coils.  KYB AGX shks.  12.98@106 w/g-tech pro.  17psi.  All work and fabrication done by ME