S14 SR Blitz Twin Plate Clutch issue - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

GabeS14 · 12-18-2008, 02:22 PM

thanks for the help man.

jdmkings · 12-18-2008, 08:44 PM

np..pm answered. good luck

jdmkings · 12-25-2008, 10:38 AM

GabeS14 · 12-25-2008, 03:35 PM

Updates.....
I found the right Sleeve.... installed.... and it worked well.. till the temperature rose..
as soon as the car temperature reaches operating temp.. I start having problems with it again..
I had noticed this when i drove it to the shop,... it drives perfectly when the car is still cold.. as soon as the temperature rises.. then i start having trouble putting it in gear.. we added fluid.. (it was low)
but still the same thing..???
wtf that doesnt make sense!!!

jdmkings · 12-28-2008, 09:04 AM

sounds like a hydraulic issue. could be a bad master or slave. check to see that the adjustment on the clutch pedal is with in spec. when it gets hot, the fluid could pass around the piston cup and you'll lose pressure. just a thought. other than that, i'm stumped. good luck

lok · 12-28-2008, 01:45 PM

check the free play in the pedal

sr20detpl510 · 04-17-2012, 02:23 PM

So Gabe, This is John.
Did you ever confirm that this 350Z TOB that you gave me works for this clutch?
Please let me know..

(Mods... Sorry for the Hella massive crazy 4 year bump....)

GabeS14 · 04-17-2012, 02:42 PM

Quote:

Originally Posted by sr20detpl510

So Gabe, This is John.
Did you ever confirm that this 350Z TOB that you gave me works for this clutch?
Please let me know..

(Mods... Sorry for the Hella massive crazy 4 year bump....)

It was on my running car for a while remember?
I pulled it straight out and sold it to you after the accident

sr20detpl510 · 04-17-2012, 07:03 PM

Quote:

Originally Posted by GabeS14

It was on my running car for a while remember?
I pulled it straight out and sold it to you after the accident

Cool, So an alternative to the "ORC or Blitz Throw Out Bearing and Sleeve is the 350Z Throw out bearing and Sleeve.
I just wanted to get a new bearing for the sleeve and was researching it when I came across this thread.. hahaha

My motor is at Mazworx as we speak and I am getting together all the stuff I need to put it back in.
Also doing up my engine bay! Cant wait!

Here's my current motor removed....

GabeS14 · 04-18-2012, 10:58 AM

Quote:

Originally Posted by sr20detpl510

Cool, So an alternative to the "ORC or Blitz Throw Out Bearing and Sleeve is the 350Z Throw out bearing and Sleeve.
I just wanted to get a new bearing for the sleeve and was researching it when I came across this thread.. hahaha

My motor is at Mazworx as we speak and I am getting together all the stuff I need to put it back in.
Also doing up my engine bay! Cant wait!

Here's my motor removed....

Looking nice so far!

12-18-2008, 02:22 PM	#31
GabeS14 Post Whore! Join Date: Dec 2005 Location: Sin City Las Vegas Posts: 4,521 Trader Rating: (27) Rides Gallery: GabeS14 Feedback Score: 27 reviews	thanks for the help man. __________________ E92 M3 19" wheels for sale///JWT Cams and Springs +30whp for sale... cheap.

12-25-2008, 10:38 AM	#33
jdmkings Join Date: Dec 2008 Location: Orange County, CA Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	ORC Ogura Release Sleeve & Bearing Set

12-25-2008, 03:35 PM	#34
GabeS14 Post Whore! Join Date: Dec 2005 Location: Sin City Las Vegas Posts: 4,521 Trader Rating: (27) Rides Gallery: GabeS14 Feedback Score: 27 reviews	Updates..... I found the right Sleeve.... installed.... and it worked well.. till the temperature rose.. as soon as the car temperature reaches operating temp.. I start having problems with it again.. I had noticed this when i drove it to the shop,... it drives perfectly when the car is still cold.. as soon as the temperature rises.. then i start having trouble putting it in gear.. we added fluid.. (it was low) but still the same thing..??? wtf that doesnt make sense!!! __________________ E92 M3 19" wheels for sale///JWT Cams and Springs +30whp for sale... cheap.

12-18-2008, 08:44 PM	#32
jdmkings Join Date: Dec 2008 Location: Orange County, CA Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	np..pm answered. good luck

12-28-2008, 09:04 AM	#35
jdmkings Join Date: Dec 2008 Location: Orange County, CA Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	sounds like a hydraulic issue. could be a bad master or slave. check to see that the adjustment on the clutch pedal is with in spec. when it gets hot, the fluid could pass around the piston cup and you'll lose pressure. just a thought. other than that, i'm stumped. good luck

12-28-2008, 01:45 PM	#36
lok Zilvia Addict Join Date: Jul 2003 Location: Oklahoma Posts: 816 Trader Rating: (10) Feedback Score: 10 reviews	check the free play in the pedal

04-17-2012, 02:23 PM	#37
sr20detpl510 Leaky Injector Join Date: Apr 2011 Location: Bay Area Posts: 75 Trader Rating: (1) Feedback Score: 1 reviews	So Gabe, This is John. Did you ever confirm that this 350Z TOB that you gave me works for this clutch? Please let me know.. (Mods... Sorry for the Hella massive crazy 4 year bump....)