Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!* - Page 223 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Royal_T · 10-06-2009, 12:48 AM

Took new pics today so I decided to share. You can also check out my new roll cage here: http://zilvia.net/f/chat/282727-come...roll-cage.html

95KA-Turbo · 10-06-2009, 08:48 AM

From VIR this weekend:

17X10 +7 245/40/17 Yokohama S-Types up front
17X9 -7 225/45/17 Federals out back

After my front lip exploded:

conrad_s13.5 · 10-06-2009, 05:44 PM

fuckin' sick royal T,..... fuck life thats sick!

JDM_s14 · 10-06-2009, 11:35 PM

how can i make this fit on my car
wheels are 18x11-13 (rear) and fronts are 18x10-5(fronts)
my car is a 350z slammed on some stances coil

ILoveMyRHS13 · 10-06-2009, 11:51 PM

Put them on and go from there.

95KA-Turbo · 10-07-2009, 12:03 AM

Those should fit with rolled fenders and 225/35 and 245/35s

nieko · 10-07-2009, 03:52 AM

David B S12 · 10-07-2009, 03:55 AM

solid axle

front.. rikens

rear hoshinos with a 50 mill spacer

franklin93zx · 10-07-2009, 10:30 AM

Quote:

Originally Posted by BRAIN_Z33

I know you guys like specs, but damn i couldnt resist sharing these Z's.

For the record, Not my cars, dont know specs. Just some eye candy.

and this sexxxxxy Z33, I do recall that it was on baggs

The white z32 is photoshopped he's on 300zxclub. he's not as low as artic maybe like a 1/2 higher then him

Kouki_monstr · 10-07-2009, 02:09 PM

Quote:

Originally Posted by Kouki_monstr

Hey guys, just threw these on for fun while i wait for my origin kit and fenders to get here. Im going to go with 30mm front fenders and 50mm overfenders.
WEDS KRANZE CERBERUS 1's
18x9.5-3 thinking 235/40 tire
18x10.5-14 thinking 245/40 tire
Megan street coils are on for now

I didnt have nother jack to push them up with. Just put them on for a glimps.To be continued

hey guys, i need your help. I have a good connection for some 20mm front fenders and 30mm or 50mm dmax overfenders. Will the 20mm work out front? and can i go gangster 50mm in the rear and look good with a -14 offset? need your wheel whoring expertees thanks

brainfood · 10-07-2009, 02:44 PM

Quote:

Originally Posted by JDM_s14

how can i make this fit on my car
wheels are 18x11-13 (rear) and fronts are 18x10+0(fronts)
my car is a 350z slammed on some stances coil
*BERSAGLIO PICS*

If you want to sell them let me know

95KA-Turbo · 10-07-2009, 02:55 PM

Quote:

Originally Posted by Kouki_monstr

hey guys, i need your help. I have a good connection for some 20mm front fenders and 30mm or 50mm dmax overfenders. Will the 20mm work out front? and can i go gangster 50mm in the rear and look good with a -14 offset? need your wheel whoring expertees thanks

50mms will work, you will just have to adjust your camber. If it is a drift car then you'll want minimal camber anyway. I am sure some others will disagree, but run a 265/35/18 and like -2 camber and you should be good.

Kouki_monstr · 10-07-2009, 03:00 PM

the thing is, i want the stretched look. After what someone said when i posted earlier about a sunk in look with the 50mm overfenders, it got me worried. i deff want to go with a 245 on my rear 10.5 rim. just dont want it sunk behined a 50mm. im also probably going with origins aggresive kit. ugh to much to wonder!

slow40sx · 10-07-2009, 03:07 PM

Quote:

Originally Posted by nieko

i fucking love this beat ass sil-coupe, shit is real dope

JDM_s14 · 10-07-2009, 04:55 PM

Quote:

Originally Posted by brainfood

If you want to sell them let me know

Hahaha you will be the first to know!!

deolio · 10-07-2009, 05:40 PM

Quote:

Originally Posted by Kouki_monstr

the thing is, i want the stretched look. After what someone said when i posted earlier about a sunk in look with the 50mm overfenders, it got me worried. i deff want to go with a 245 on my rear 10.5 rim. just dont want it sunk behined a 50mm. im also probably going with origins aggresive kit. ugh to much to wonder!

check it -> rimtuck.com personally, i'd go with 30mm overs or slap on some 20mm spacers, but spacers are never good.

*revat619* · 10-07-2009, 06:43 PM

Quote:

Originally Posted by Kouki_monstr

the thing is, i want the stretched look. After what someone said when i posted earlier about a sunk in look with the 50mm overfenders, it got me worried. i deff want to go with a 245 on my rear 10.5 rim. just dont want it sunk behined a 50mm. im also probably going with origins aggresive kit. ugh to much to wonder!

20mm fenders will be fine for the front, but definitely go with 30mm rear fenders.

This is my car with 18x10.5 + 15 in the rear with -1.5 degrees of camber and 255/35s on stock fenders

As you can see a 10.5 +15 juuuust fits under stock fenders and your wheel is 10.5 - 14. That being the case, your wheel will stick out an additional 29mm than the + 15. Therefore, a 30mm over fender will be perfect. 50mm WILL have your shit looking sunk by a full 20mm.

J-Style · 10-07-2009, 06:46 PM

Quote:

Originally Posted by slow40sx

i fucking love this beat ass sil-coupe, shit is real dope

I totally feel you, it's brutally dope.

*hOngsterr* · 10-07-2009, 07:39 PM

Quote:

Originally Posted by slow40sx

i fucking love this beat ass sil-coupe, shit is real dope

Quote:

Originally Posted by J-Style

I totally feel you, it's brutally dope.

LOL, yeah the silvia coupe looks nice,
its not a like a sil-80.

Kouki_monstr · 10-07-2009, 10:23 PM

Quote:

Originally Posted by deolio

check it -> rimtuck.com personally, i'd go with 30mm overs or slap on some 20mm spacers, but spacers are never good.

Quote:

Originally Posted by revat619

20mm fenders will be fine for the front, but definitely go with 30mm rear fenders.

This is my car with 18x10.5 + 15 in the rear with -1.5 degrees of camber and 255/35s on stock fenders

As you can see a 10.5 +15 juuuust fits under stock fenders and your wheel is 10.5 - 14. That being the case, your wheel will stick out an additional 29mm than the + 15. Therefore, a 30mm over fender will be perfect. 50mm WILL have your shit looking sunk by a full 20mm.

Thanks a lot guys! i will be getting everything friday! cant wait! then i just need tire choice. brand not size.

Royal_T · 10-07-2009, 11:07 PM

Quote:

Originally Posted by JDM_s14

how can i make this fit on my car
wheels are 18x11-13 (rear) and fronts are 18x10-5(fronts)
my car is a 350z slammed on some stances coil

You will have no problem fitting those wheels. you have to remember those are 18's just do a fender roll and a little pull and slam that thing to the ground. I know some one that had 18x12+5 with 275 tires and it looks sick..

fliplyricist1 · 10-08-2009, 12:39 AM

just curious, how many of you have experienced front fender damage from your aggressive fitments such as creasing/buckling especially during full-point turning on bumps, etc....

pretty miraculous if you haven't

JVD · 10-08-2009, 01:05 AM

Quote:

Originally Posted by fliplyricist1

just curious, how many of you have experienced front fender damage from your aggressive fitments such as creasing/buckling especially during full-point turning on bumps, etc....

pretty miraculous if you haven't

I'm sure most people here have. My front fenders had the inner lips CUT off. First test drive with 18's and my fender got sucked inward.

I just carried pliers around with me that summer. Hahha. But the huge chunks of bondo/paint were not attractive.

Wish I would have taken pictures of that.

J-Style · 10-08-2009, 01:43 AM

Lol!

If I go out and slide around I always end up with rubber just above my front fender, but it not too bad.

nznew · 10-08-2009, 01:49 AM

Quote:

Originally Posted by fliplyricist1

just curious, how many of you have experienced front fender damage from your aggressive fitments such as creasing/buckling especially during full-point turning on bumps, etc....

pretty miraculous if you haven't

Quote:

Originally Posted by nieko

look here simple cool and rough

nieko · 10-08-2009, 02:19 AM

funny thing is....

none of that damage was from my wheel hahahah

by the way... nexens stretch differently than azenis... fml

look at that rubber all over my sideskirt and car... fml

95KA-Turbo · 10-08-2009, 08:17 AM

Quote:

Originally Posted by fliplyricist1

just curious, how many of you have experienced front fender damage from your aggressive fitments such as creasing/buckling especially during full-point turning on bumps, etc....

pretty miraculous if you haven't

You can see all of the rubber on the front fender in this picture:

It is also all over my mirrors and down the side of my car. No buckling or anything though. I have metal fenders though. Usually if you have fiberglass part of the fender just gets eaten away.

Marcus · 10-08-2009, 10:03 AM

17x10+5 225/35. yea metal fenders ftw. but on white you can see burnt paint fml
but its pretty cool front tire smoke from fender lol

95KA-Turbo · 10-08-2009, 03:54 PM

LOL, yeah that's what my mirror and shit looks like. My drivers side fender is spray paint so it is all bubbly and crap right there.

BTW I can't believe you are rubbing with a 225/35 since I have a 10+7 and a 245/40.

***FaLKoN240*** · 10-08-2009, 05:41 PM

To take that old rubber off, use WD40.

It's an old drag racer secret.

I do it all the time

10-06-2009, 12:48 AM	#6661
Royal_T Zilvia Addict Join Date: Feb 2009 Location: TX Age: 41 Posts: 813 Trader Rating: (1) Feedback Score: 1 reviews	Took new pics today so I decided to share. You can also check out my new roll cage here: http://zilvia.net/f/chat/282727-come...roll-cage.html __________________ http://zilvia.net/advertise.html

10-06-2009, 08:48 AM	#6662
95KA-Turbo Post Whore! Join Date: Jul 2005 Location: LA Age: 39 Posts: 3,402 Trader Rating: (19) Feedback Score: 19 reviews	From VIR this weekend: 17X10 +7 245/40/17 Yokohama S-Types up front 17X9 -7 225/45/17 Federals out back After my front lip exploded: __________________ Instagram - SJKnoop

10-06-2009, 05:44 PM	#6663
conrad_s13.5 Zilvia FREAK! Join Date: Jan 2009 Location: STL Age: 36 Posts: 1,533 Trader Rating: (6) Feedback Score: 6 reviews	fuckin' sick royal T,..... fuck life thats sick! __________________ cONtRol FReAkS

10-06-2009, 11:35 PM	#6664
JDM_s14 Leaky Injector Join Date: Jul 2004 Location: florida Posts: 77 Trader Rating: (0) Feedback Score: 0 reviews	how can i make this fit on my car wheels are 18x11-13 (rear) and fronts are 18x10-5(fronts) my car is a 350z slammed on some stances coil Last edited by JDM_s14; 10-07-2009 at 04:51 PM..

10-07-2009, 12:03 AM	#6666
95KA-Turbo Post Whore! Join Date: Jul 2005 Location: LA Age: 39 Posts: 3,402 Trader Rating: (19) Feedback Score: 19 reviews	Those should fit with rolled fenders and 225/35 and 245/35s __________________ Instagram - SJKnoop

10-07-2009, 03:52 AM	#6667
nieko Post Whore! Join Date: Sep 2007 Location: Westminster Age: 33 Posts: 2,695 Trader Rating: (14) Feedback Score: 14 reviews

10-07-2009, 03:55 AM	#6668
David B S12 Zilvia Junkie Join Date: Jun 2008 Location: NOVA (Northern VA) Posts: 324 Trader Rating: (0) Feedback Score: 0 reviews	solid axle front.. rikens rear hoshinos with a 50 mill spacer

10-07-2009, 03:00 PM	#6673
Kouki_monstr Zilvia FREAK! Join Date: Sep 2009 Location: Colorado Age: 38 Posts: 1,295 Trader Rating: (12) Feedback Score: 12 reviews	the thing is, i want the stretched look. After what someone said when i posted earlier about a sunk in look with the 50mm overfenders, it got me worried. i deff want to go with a 245 on my rear 10.5 rim. just dont want it sunk behined a 50mm. im also probably going with origins aggresive kit. ugh to much to wonder!

10-08-2009, 12:39 AM	#6682
fliplyricist1 Leaky Injector Join Date: Jun 2007 Location: northwest Posts: 108 Trader Rating: (1) Feedback Score: 1 reviews	just curious, how many of you have experienced front fender damage from your aggressive fitments such as creasing/buckling especially during full-point turning on bumps, etc.... pretty miraculous if you haven't

10-08-2009, 01:43 AM	#6684
J-Style Zilvia Addict Join Date: Oct 2006 Location: St. Helena, CA (707) Age: 35 Posts: 609 Trader Rating: (0) Feedback Score: 0 reviews	Lol! If I go out and slide around I always end up with rubber just above my front fender, but it not too bad.

10-08-2009, 02:19 AM	#6686
nieko Post Whore! Join Date: Sep 2007 Location: Westminster Age: 33 Posts: 2,695 Trader Rating: (14) Feedback Score: 14 reviews	funny thing is.... none of that damage was from my wheel hahahah by the way... nexens stretch differently than azenis... fml look at that rubber all over my sideskirt and car... fml

10-08-2009, 10:03 AM	#6688
Marcus Nissanaholic! Join Date: Nov 2007 Location: San Diego Age: 36 Posts: 2,087 Trader Rating: (18) Feedback Score: 18 reviews	17x10+5 225/35. yea metal fenders ftw. but on white you can see burnt paint fml but its pretty cool front tire smoke from fender lol

10-08-2009, 03:54 PM	#6689
95KA-Turbo Post Whore! Join Date: Jul 2005 Location: LA Age: 39 Posts: 3,402 Trader Rating: (19) Feedback Score: 19 reviews	LOL, yeah that's what my mirror and shit looks like. My drivers side fender is spray paint so it is all bubbly and crap right there. BTW I can't believe you are rubbing with a 225/35 since I have a 10+7 and a 245/40. __________________ Instagram - SJKnoop

10-08-2009, 05:41 PM	#6690
*FaLKoN240* Super Moderator Join Date: Jun 2004 Location: SoCal Temecula Posts: 16,885 Trader Rating: (73) Feedback Score: 73 reviews	To take that old rubber off, use WD40. It's an old drag racer secret. I do it all the time __________________ Best way to do business with me? Make your best offer FIRST.