** drag zilvians chime in** - Page 27 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jr_ss · 12-27-2012, 01:38 PM

Quote:

Originally Posted by S@nt0s

well for sure i can fo i for less then 1k for the rears and it will have more adjustment then anything offered out there. these will put those HKS coilovers to shame lol
Ill get it rolling and go from there.

That's good to hear, especially considering how many cheap ass s-chassis owners are out there. Mark me down as interested and keep us posted. Any idea what type of damper you are going to run? You don't have to release "secret" information or drawings, I'm just curious that's all.

S@nt0s · 12-27-2012, 02:53 PM

nothing secert about it , i have been lokoing at the QA1 double adjustables right now but will be looking at others as soon as we get down to that point.
\spoke with my buddy who has my car and once we get the car running then we will look at suspension but in the meantime i will make the billet mounts since they will work with others as well.

slow92 · 12-29-2012, 02:44 AM

I am interested as well, but price is definitely going to be the deciding factor.

2muchboost · 01-03-2013, 06:37 AM

Might be asking a dumb question here but for those of you running a setup that uses tubes, are you actually using your tubes without screwing the tires to the rim? Reason I ask is I am looking to setup my MT ET Drags on my Z32 TT wheel and do not feel comfortable installing the tubes due to the fact that I wouldnt be screwing these into the rim. My fear is that somehow the valve stem could get damaged/cut off leaving me with NO tire pressure. Might be a dumb ass fear but since I dont have much experience with Tubed Drag tires I wanted to know what you guys do/recommend.

Also, if you do not use the tubes do you guys just use lots of beadlock around the wheel? I know more than likely the air will be leaking out faster than on a normal tire due to the nature of the tire I just want to be as sure as I can that the wheel is stuck to the rim.

Thanx

S@nt0s · 01-03-2013, 07:52 AM

you can use tubes with or without screws but you have to drill the valve hole on the wheel to use the tubes since they have a biger valve . mark your tire to see if you are getting rim slip. if you have slipping then go on to screws or beadlock them. we ran screws for a long time but now on the current set up its outside beadlock and screws inner side. my corolla has none and the S13 had none either.

2muchboost · 01-03-2013, 09:54 AM

Sounds good thanks for the info and for the pointers.

S@nt0s · 01-03-2013, 10:45 AM

no problem, im trying to make the IFO event we have out here next month but its going to be tight

drscooper · 01-09-2013, 03:46 PM

https://www.youtube.com/watch?v=

&

drscooper · 01-09-2013, 03:51 PM

thought everyone would enjoy this beast! ran 6's damm fast if you ask me!

Yellow4g63 · 01-09-2013, 05:52 PM

I think I heard it hit VVL in 3rd gear.

drscooper · 01-09-2013, 08:59 PM

thats what im thinking thing is so dam sick and quick lol

sr20s13abel · 01-10-2013, 12:16 PM

Quote:

Originally Posted by rb25_s13*CHUKI

Why isn't abel all over this thread?

ABEL IS BACK !!!

BACK IN 2010 MY CAR MADE 624whp... gt35r @30psi +75shot of nitrous ..... RAN 10.10 @ 140MPH

NOW IN 2012 MY CAR MAKES 740whp... pte6766 @ 33psi no juice RUNS 9.85 @ 142MPH

sr20s13abel · 01-10-2013, 12:19 PM

1.4 60ft..
6.4 @ 113 in the 1/8 mile

Abel Blanco Nissan 240sx VVL SR20DET @ Irwindale 9/13/12 - YouTube

sr20s13abel · 01-10-2013, 03:52 PM

1.4 60ft not only one time but every time..testing and letting off the gas...

sr20s13abel · 01-10-2013, 03:53 PM

last time at the 1/4 mile.

kyles1988 · 01-10-2013, 04:02 PM

I'll embed that for ya

sr20s13abel · 01-10-2013, 04:06 PM

HERE IS A LIST OF WHAT IS INCLUDED IN THE BUILD...

BLOCK.....

90MM SR20VE CP PISTONS (9.0:1)
MANLEY TURBO TUFF RODS
ACL RACE BEARINGS (main, rods, thust washers)
ARP MAIN STUDS
NEW OEM WATER PUMP
NEW OEM NISSAN SR20VE OIL PUMP (new timing chain KIT )
NEW OEM REAR MAIN SEAL
DARTON SLEEVES (bored to 90mm)
CHECK, POLISHED AND BALANCED CRANK
GREDDY OVERSIZED OIL PAN
ATI DAMPENER
NISMO GMAX TWIN PLATE CLUTCH
MAZWORX 90MM HEADGASKET (1/2 custom machined)
MAZWORX SRVG TRANSMISION ADAPTER KIT

CYLINDER HEAD.....VVL/VE

SUPERTECH VALVETRAIN (Supertech dual valve springs
Supertech Titanium Retainers
Supertech Valve Guides
Supertech Valve Seals
Supertech Intake & exhaust oversized valves )
COMPETITION VALVE JOB
CNC COMBUSTION CHAMBER (90MM)
CLEANED R/R OIL PORTS
RESURFACED HEAD
KELFORD 292/303 TURBO VE CAMS
TOMEI CAM GEARS
MAZWORX VVL/RWD CONVERSION KIT
MAZWORX HALL SENSOR KIT (eliminates cam angle sensor)
MAZWORX VE CUSTOM INTAKE MANIFOLD
INJECTOR DYNAMICS (2000cc)
MAZWORX TURBO MANIFOLD KIT
TIAL 44MM WASTEGATE
PTE6766 TURBO

jimefam · 01-10-2013, 07:52 PM

I'm almost done with my drag 240. Hope to make about 1, 000whp and run 4's in the 1/8 and high 7's in the 1/4. Its an Rb25 with a th400.

Yellow4g63 · 01-10-2013, 07:53 PM

+1 jimefam's setup is legit.

jimefam · 01-10-2013, 07:56 PM

Quote:

Originally Posted by Yellow4g63

+1 jimefam's setup is legit.

Haha thanks but we'll find out soon enough when it goes on the dyno.

drscooper · 01-10-2013, 10:02 PM

wow man thats sick and glad to see some sick ass cars in here forsure!

slow92 · 01-11-2013, 02:43 PM

That is awesome. Both of those cars move, especially that corolla. I can't wait until my car is done.

S@nt0s · 01-11-2013, 03:15 PM

Quote:

Originally Posted by slow92

That is awesome. Both of those cars move, especially that corolla. I can't wait until my car is done.

what corolla?

drscooper · 01-11-2013, 04:49 PM

Quote:

Originally Posted by slow92

That is awesome. Both of those cars move, especially that corolla. I can't wait until my car is done.

no corolla dude 240 and a datsun... lol

S@nt0s · 01-11-2013, 05:09 PM

Quote:

Originally Posted by drscooper

no corolla dude 240 and a datsun... lol

im totally lost

slow92 · 01-12-2013, 06:27 AM

Quote:

Originally Posted by drscooper

no corolla dude 240 and a datsun... lol

Ooops. I watched the video when I was half asleep and I thought maybe this was Santos' Corolla.

S@nt0s · 01-12-2013, 08:53 AM

Quote:

Originally Posted by slow92

Ooops. I watched the video when I was half asleep and I thought maybe this was Santos' Corolla.

What color was it

slow92 · 01-12-2013, 09:00 AM

Quote:

Originally Posted by S@nt0s

no bushing mine is solid

the corolla is a 74 SR5. this is a pic of it around 99-00 time frame at Pomona Raceway.

Somewhat similar in a quick glance while you are falling asleep.

Seraphim38 · 01-12-2013, 09:55 AM

If one builds a 500rwhp+ SR, then adds an SRVG adapter setup, Z32 trans and heavy duty one piece driveline and Kaaz 1.5 LSD,

Would anything else be pron to breaking at the drag strip out of curiosity? Do you need to install heavy duty rear zxles/half shafts?

sr20s13abel · 01-12-2013, 11:37 AM

If u use anti-lag and pop the clutch.. U can break axles if the slicks hook good. if u use a drag radial u be fine.. If u ride out the clutch u be fine with a slick as well. Axles break but not that fast..

12-27-2012, 02:53 PM	#782
S@nt0s Zilvia Addict Join Date: Jan 2008 Location: 310 all day! Age: 43 Posts: 912 Trader Rating: (4) Feedback Score: 4 reviews	nothing secert about it , i have been lokoing at the QA1 double adjustables right now but will be looking at others as soon as we get down to that point. \spoke with my buddy who has my car and once we get the car running then we will look at suspension but in the meantime i will make the billet mounts since they will work with others as well. __________________ MunkyW3rkz Racing

12-29-2012, 02:44 AM	#783
slow92 Zilvia Junkie Join Date: Jun 2008 Location: NV Posts: 423 Trader Rating: (16) Feedback Score: 16 reviews	I am interested as well, but price is definitely going to be the deciding factor. __________________ Sr22 in the works

01-03-2013, 06:37 AM	#784
2muchboost Nissanaholic! Join Date: Apr 2003 Location: Austin, TX Age: 40 Posts: 2,183 Trader Rating: (33) Feedback Score: 33 reviews	Might be asking a dumb question here but for those of you running a setup that uses tubes, are you actually using your tubes without screwing the tires to the rim? Reason I ask is I am looking to setup my MT ET Drags on my Z32 TT wheel and do not feel comfortable installing the tubes due to the fact that I wouldnt be screwing these into the rim. My fear is that somehow the valve stem could get damaged/cut off leaving me with NO tire pressure. Might be a dumb ass fear but since I dont have much experience with Tubed Drag tires I wanted to know what you guys do/recommend. Also, if you do not use the tubes do you guys just use lots of beadlock around the wheel? I know more than likely the air will be leaking out faster than on a normal tire due to the nature of the tire I just want to be as sure as I can that the wheel is stuck to the rim. Thanx Last edited by 2muchboost; 01-03-2013 at 09:55 AM..

01-03-2013, 07:52 AM	#785
S@nt0s Zilvia Addict Join Date: Jan 2008 Location: 310 all day! Age: 43 Posts: 912 Trader Rating: (4) Feedback Score: 4 reviews	you can use tubes with or without screws but you have to drill the valve hole on the wheel to use the tubes since they have a biger valve . mark your tire to see if you are getting rim slip. if you have slipping then go on to screws or beadlock them. we ran screws for a long time but now on the current set up its outside beadlock and screws inner side. my corolla has none and the S13 had none either. __________________ MunkyW3rkz Racing

01-03-2013, 10:45 AM	#787
S@nt0s Zilvia Addict Join Date: Jan 2008 Location: 310 all day! Age: 43 Posts: 912 Trader Rating: (4) Feedback Score: 4 reviews	no problem, im trying to make the IFO event we have out here next month but its going to be tight __________________ MunkyW3rkz Racing

01-03-2013, 09:54 AM	#786
2muchboost Nissanaholic! Join Date: Apr 2003 Location: Austin, TX Age: 40 Posts: 2,183 Trader Rating: (33) Feedback Score: 33 reviews	Sounds good thanks for the info and for the pointers.

01-09-2013, 03:46 PM	#788
drscooper Zilvia Addict Join Date: Jul 2012 Location: homegrown Posts: 799 Trader Rating: (0) Feedback Score: 0 reviews	https://www.youtube.com/watch?v=&

01-09-2013, 03:51 PM	#789
drscooper Zilvia Addict Join Date: Jul 2012 Location: homegrown Posts: 799 Trader Rating: (0) Feedback Score: 0 reviews	thought everyone would enjoy this beast! ran 6's damm fast if you ask me!

01-09-2013, 05:52 PM	#790
Yellow4g63 Zilvia FREAK! Join Date: Jan 2003 Location: Socal Posts: 1,454 Trader Rating: (5) Feedback Score: 5 reviews	I think I heard it hit VVL in 3rd gear. __________________ 95 240sx RB20 415whp 91 Nx2000 VVL yo

01-09-2013, 08:59 PM	#791
drscooper Zilvia Addict Join Date: Jul 2012 Location: homegrown Posts: 799 Trader Rating: (0) Feedback Score: 0 reviews	thats what im thinking thing is so dam sick and quick lol

01-10-2013, 12:19 PM	#793
sr20s13abel Leaky Injector Join Date: Nov 2010 Location: los angeles Age: 38 Posts: 108 Trader Rating: (0) Feedback Score: 0 reviews	Last time to the track.. 1.4 60ft.. 6.4 @ 113 in the 1/8 mile Abel Blanco Nissan 240sx VVL SR20DET @ Irwindale 9/13/12 - YouTube Last edited by sr20s13abel; 01-10-2013 at 07:58 PM..

01-10-2013, 03:52 PM	#794
sr20s13abel Leaky Injector Join Date: Nov 2010 Location: los angeles Age: 38 Posts: 108 Trader Rating: (0) Feedback Score: 0 reviews	1.4 60ft not only one time but every time..testing and letting off the gas... Last edited by sr20s13abel; 01-10-2013 at 07:43 PM..

01-10-2013, 03:53 PM	#795
sr20s13abel Leaky Injector Join Date: Nov 2010 Location: los angeles Age: 38 Posts: 108 Trader Rating: (0) Feedback Score: 0 reviews	last time at the 1/4 mile. Last edited by sr20s13abel; 01-10-2013 at 07:47 PM..

01-10-2013, 04:02 PM	#796
kyles1988 Zilvia FREAK! Join Date: Nov 2006 Location: Normal, IL Posts: 1,026 Trader Rating: (12) Feedback Score: 12 reviews	I'll embed that for ya

01-10-2013, 04:06 PM	#797
sr20s13abel Leaky Injector Join Date: Nov 2010 Location: los angeles Age: 38 Posts: 108 Trader Rating: (0) Feedback Score: 0 reviews	HERE IS A LIST OF WHAT IS INCLUDED IN THE BUILD... BLOCK..... 90MM SR20VE CP PISTONS (9.0:1) MANLEY TURBO TUFF RODS ACL RACE BEARINGS (main, rods, thust washers) ARP MAIN STUDS NEW OEM WATER PUMP NEW OEM NISSAN SR20VE OIL PUMP (new timing chain KIT ) NEW OEM REAR MAIN SEAL DARTON SLEEVES (bored to 90mm) CHECK, POLISHED AND BALANCED CRANK GREDDY OVERSIZED OIL PAN ATI DAMPENER NISMO GMAX TWIN PLATE CLUTCH MAZWORX 90MM HEADGASKET (1/2 custom machined) MAZWORX SRVG TRANSMISION ADAPTER KIT CYLINDER HEAD.....VVL/VE SUPERTECH VALVETRAIN (Supertech dual valve springs Supertech Titanium Retainers Supertech Valve Guides Supertech Valve Seals Supertech Intake & exhaust oversized valves ) COMPETITION VALVE JOB CNC COMBUSTION CHAMBER (90MM) CLEANED R/R OIL PORTS RESURFACED HEAD KELFORD 292/303 TURBO VE CAMS TOMEI CAM GEARS MAZWORX VVL/RWD CONVERSION KIT MAZWORX HALL SENSOR KIT (eliminates cam angle sensor) MAZWORX VE CUSTOM INTAKE MANIFOLD INJECTOR DYNAMICS (2000cc) MAZWORX TURBO MANIFOLD KIT TIAL 44MM WASTEGATE PTE6766 TURBO Last edited by sr20s13abel; 01-10-2013 at 07:59 PM..

01-10-2013, 07:52 PM	#798
jimefam Leaky Injector Join Date: Jul 2008 Location: cumming, ga Posts: 107 Trader Rating: (1) Feedback Score: 1 reviews	I'm almost done with my drag 240. Hope to make about 1, 000whp and run 4's in the 1/8 and high 7's in the 1/4. Its an Rb25 with a th400.

01-10-2013, 07:53 PM	#799
Yellow4g63 Zilvia FREAK! Join Date: Jan 2003 Location: Socal Posts: 1,454 Trader Rating: (5) Feedback Score: 5 reviews	+1 jimefam's setup is legit. __________________ 95 240sx RB20 415whp 91 Nx2000 VVL yo

01-10-2013, 10:02 PM	#801
drscooper Zilvia Addict Join Date: Jul 2012 Location: homegrown Posts: 799 Trader Rating: (0) Feedback Score: 0 reviews	wow man thats sick and glad to see some sick ass cars in here forsure!

01-11-2013, 02:43 PM	#802
slow92 Zilvia Junkie Join Date: Jun 2008 Location: NV Posts: 423 Trader Rating: (16) Feedback Score: 16 reviews	That is awesome. Both of those cars move, especially that corolla. I can't wait until my car is done. __________________ Sr22 in the works

01-12-2013, 09:55 AM	#809
Seraphim38 Zilvia Addict Join Date: Oct 2010 Location: Washington Posts: 810 Trader Rating: (6) Feedback Score: 6 reviews	If one builds a 500rwhp+ SR, then adds an SRVG adapter setup, Z32 trans and heavy duty one piece driveline and Kaaz 1.5 LSD, Would anything else be pron to breaking at the drag strip out of curiosity? Do you need to install heavy duty rear zxles/half shafts?

01-12-2013, 11:37 AM	#810
sr20s13abel Leaky Injector Join Date: Nov 2010 Location: los angeles Age: 38 Posts: 108 Trader Rating: (0) Feedback Score: 0 reviews	If u use anti-lag and pop the clutch.. U can break axles if the slicks hook good. if u use a drag radial u be fine.. If u ride out the clutch u be fine with a slick as well. Axles break but not that fast..