This is the interior thread - Page 27 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

whiterps13 · 08-11-2010, 01:14 PM

Safety 21 6point (soon to be powder coated lime green)
Sparco Torino 2 (soon to be Bride Vios III)
Nardi Deep Corn 350mm Suede
Dmax mats
GUCCI GUCCI GUCCI

c72c · 08-11-2010, 02:18 PM

Quote:

Originally Posted by conrad_s13.5

details on that gas gauge if u got any
thats awesome!
i'd love to try that out

Quote:

Originally Posted by underground_army

X2 on the fuel i would love that in my car along with the nissan logo next to shifter

see below for fuel gauge reference...

Quote:

Originally Posted by sr20drifter1 Via PM

It's a custom one that Toby Broadfield installed in my car. From what he told me, it was the last one they had in stock.

c72c · 08-11-2010, 05:42 PM

Quote:

Originally Posted by c72c

Before-
coming soon- (for lhd)

not 100% done, but that's about the jizz of it.

bigs · 08-11-2010, 06:13 PM

Quote:

Originally Posted by c72c

not 100% done, but that's about the jizz of it.

I think you mean jist, LMAO

nathanong87 · 08-11-2010, 06:42 PM

aren't your gauges facing away from you, whilest you drive defeating the purpose of gauges. i know you said for LHD. so are you going to mass produce that pod?

CaptainVlad · 08-11-2010, 06:43 PM

Quote:

Originally Posted by whiterps13

Safety 21 6point (soon to be powder coated lime green)
Sparco Torino 2 (soon to be Bride Vios III)
Nardi Deep Corn 350mm Suede
Dmax mats
GUCCI GUCCI GUCCI

Saw your interior at that one fail BBQ meet, very nice. Should look awesome with the Brides.

frsh4 · 08-11-2010, 06:44 PM

Hes going to convert to LHD based on post above. I dont understand why. Please explain.

silviaguy240 · 08-11-2010, 06:44 PM

his previous post he quoted said coming soon for lhd, so im assuming hes going to be making them?

CaptainVlad · 08-11-2010, 07:13 PM

he has already made them, what are you guys talking about?

They are facing away from him, toward the LEFT.... Obviously he made it for vehicles that are LHD.... or he is just a damn idiot and had them face the wrong way...

shiftdrift · 08-11-2010, 07:18 PM

details on where to get/when he gets the digital fuel gauge back in stock!

Broadfield · 08-11-2010, 07:27 PM

Finished a customer's S13 cluster today. Consisting of a Race Technology Dash2 and a 52mm wideband. The Dash2 is angled into a fiberglass "cup" that I fabricated onto my normal gauge plate that I use for S13 clusters. It is recommended that the Dash2 is viewed from above at a 12 degree angle.

Build pics can be found here: Broadfield Cluster

sr20drifter1 · 08-11-2010, 07:57 PM

Quote:

Originally Posted by whiterps13

I was wondering if you were ever going to pick it up lol.
I was always stopping by the shop so I saw this thing from beginning to the end, must say it looks very nice. Love the white-face Defi's (well most of them). Cool car BTW.

Thanks. I'm having a very hard time fiding a white face 52mm defi link oil pressure gauge. He did an awesome job. I'm will be cleaning the car tomorrow,so I'll take better pics.

Quote:

Originally Posted by underground_army

X2 on the fuel i would love that in my car along with the nissan logo next to shifter

You can pm Toby Broadfield. He custom made it.

Quote:

Originally Posted by conrad_s13.5

details on that gas gauge if u got any
thats awesome!
i'd love to try that out

Custom made by Toby Broadfield. You can pm him for more details. He has a post right above.

Quote:

Originally Posted by c72c

Very nice.

Thank you very much.
I need to clean the car. I hope to do it tomorrow.

c72c · 08-11-2010, 08:03 PM

Quote:

Originally Posted by bigs

I think you mean jist, LMAO

I've heard it both ways

Quote:

Originally Posted by silviaguy240

his previous post he quoted said coming soon for lhd, so im assuming hes going to be making them?

For those who aren't too bright, refer to this ^^. Thanks silviaguy

If you frequent this thread, you would have seen the dual pod I made for RHD. Try reading rather than just looking at pics.

*Wake* · 08-11-2010, 09:14 PM

Quote:

Originally Posted by Broadfield

my normal gauge plate that I use for S13 clusters.

Toby do you sell your individual pieces or included in custom installs done by you only?

Does that question make sense?

Donkey Kong · 08-11-2010, 09:39 PM

killer240 · 08-11-2010, 10:10 PM

yo broadfield, what can you not do? lol

trigjones · 08-11-2010, 10:20 PM

Quote:

Originally Posted by axiomatik

On a related note, anyone know what the long-term durability of the Dmax floormats is like?

Late on this, but I'm really disappointed with my Dmax mats. The threading on the drivers side started wearing out within a month around my feet. It's a fairly loose weave, and it just looks frayed, bunched up...

Xbroke_kidX · 08-11-2010, 10:37 PM

Broadield interior GOD.

Broadfield · 08-11-2010, 11:34 PM

Quote:

Originally Posted by WakeBHR

Toby do you sell your individual pieces or included in custom installs done by you only?

Does that question make sense?

Makes perfect sense. Nothing I do is mass produced. So everything is one-off and made to order. For the S13 cluster, I have a template that I use for the main board, but then I cut in whatever gauges, displays etc. for the particular job. The modifications done to the front black OEM bezel and the rear white housing are all done by hand. The customer has to supply the OEM cluster for me to go and hack up, I mean "modify". So there really isn't any pieces I could sell individually.

Thanks for the question,

Toby

Metal Angel · 08-12-2010, 09:40 AM

Quote:

Originally Posted by Olly

I tried to keep my shit as simple as possible..

walk in, sit down, push it out, pinch it off, whipe it up, stand up and walk out.

sr20drifter1 · 08-12-2010, 03:27 PM

Sorry guys. I have to whore my car a little. This set up is just amazing.

scottie · 08-12-2010, 04:59 PM

^^^^
where is the night shots?!

c72c · 08-12-2010, 05:24 PM

Quote:

Originally Posted by scottie

^^^^
where is the night shots?!

I agree, turn the lights on and the flash off

Mister.E · 08-12-2010, 05:42 PM

man i need to find somebody who wants to trade all of their white faced Defi's for my BF's. im really digging the white faced ones nowadays.

sliptones629 · 08-12-2010, 06:19 PM

Quote:

Originally Posted by Broadfield

Makes perfect sense. Nothing I do is mass produced. So everything is one-off and made to order. For the S13 cluster, I have a template that I use for the main board, but then I cut in whatever gauges, displays etc. for the particular job. The modifications done to the front black OEM bezel and the rear white housing are all done by hand. The customer has to supply the OEM cluster for me to go and hack up, I mean "modify". So there really isn't any pieces I could sell individually.

Thanks for the question,

Toby

Is there any info that can be given for the digital fuel gauge we are all in love with? Is it just a round gauge stuck inside??

Broadfield · 08-12-2010, 06:24 PM

Quote:

Originally Posted by sliptones629

Is there any info that can be given for the digital fuel gauge we are all in love with? Is it just a round gauge stuck inside??

Yep, it's just a round gauge I glued into the backside. I obviously cut the center support out on the OEM piece and filed all of the edges straight. Then cut a piece of smoked plexiglass for the front. You can check out build pics here:

http://public.fotki.com/broadfield/p...sangwas-240sx/

2nd page specifically for the fuel gauge.

*Yuri* · 08-12-2010, 11:23 PM

Got it running finally and brought it out of storage.
Here's its daily driver setup, I sold the track setup a couple years ago after I put it into storage.
Only things left that are original are the door panels, dash, headliner, and digital gauge cluster with working HUD, the rest is a full leather interior with S14 seats, nice sound system, etc.

cdlong · 08-14-2010, 12:55 AM

Quote:

Originally Posted by c72c

that's about the jizz of it.

Quote:

Originally Posted by bigs

I think you mean jist, LMAO

i think you both mean Gist.

deadghost · 08-14-2010, 03:28 AM

Got my fabric back from the cleaners today, lazy ass cleaner lady took so much time that I came up on a clean black zeta II. Finding a red Brix is going to be a bitch.

c72c · 08-14-2010, 07:38 AM

Quote:

Originally Posted by Broadfield

Yep, it's just a round gauge I glued into the backside. I obviously cut the center support out on the OEM piece and filed all of the edges straight. Then cut a piece of smoked plexiglass for the front. You can check out build pics here:

I'm sure you hear/read it a lot, but, you do some pretty good work. I like the way that setup looks, sleek and simple.

Quote:

Originally Posted by cdlong

i think you both mean Gist.

No, i definitely meant to type jizz.

08-11-2010, 01:14 PM	#781
whiterps13 Zilvia Addict Join Date: Aug 2005 Location: Illinois Age: 36 Posts: 831 Trader Rating: (1) Feedback Score: 1 reviews	Safety 21 6point (soon to be powder coated lime green) Sparco Torino 2 (soon to be Bride Vios III) Nardi Deep Corn 350mm Suede Dmax mats GUCCI GUCCI GUCCI __________________

08-11-2010, 06:42 PM	#785
nathanong87 Post Whore! Join Date: Jul 2006 Location: maryland Age: 36 Posts: 5,182 Trader Rating: (6) Feedback Score: 6 reviews	aren't your gauges facing away from you, whilest you drive defeating the purpose of gauges. i know you said for LHD. so are you going to mass produce that pod? __________________ IG @nathanong87 --- Night ★ Life natelife.tumblr.com

08-11-2010, 06:44 PM	#787
frsh4 Nissanaholic! Join Date: Jul 2009 Location: Long Beach Age: 33 Posts: 1,638 Trader Rating: (17) Feedback Score: 17 reviews	Hes going to convert to LHD based on post above. I dont understand why. Please explain. __________________ http://thatistupid.tumblr.com/

08-11-2010, 06:44 PM	#788
silviaguy240 Post Whore! Join Date: Feb 2005 Location: Delaware Age: 35 Posts: 3,719 Trader Rating: (15) Feedback Score: 15 reviews	his previous post he quoted said coming soon for lhd, so im assuming hes going to be making them? __________________

08-11-2010, 07:27 PM	#791
Broadfield Zilvia.net Advertiser Join Date: Oct 2006 Location: Normal, IL Age: 50 Posts: 2,946 Trader Rating: (163) Feedback Score: 163 reviews	Finished a customer's S13 cluster today. Consisting of a Race Technology Dash2 and a 52mm wideband. The Dash2 is angled into a fiberglass "cup" that I fabricated onto my normal gauge plate that I use for S13 clusters. It is recommended that the Dash2 is viewed from above at a 12 degree angle. Build pics can be found here: Broadfield Cluster __________________ Follow Along For My Latest Work My Portfolio Please Share Check Out My Builds

08-11-2010, 07:13 PM	#789
CaptainVlad Zilvia Junkie Join Date: Oct 2007 Location: Chicago, Illinois Age: 33 Posts: 329 Trader Rating: (4) Feedback Score: 4 reviews	he has already made them, what are you guys talking about? They are facing away from him, toward the LEFT.... Obviously he made it for vehicles that are LHD.... or he is just a damn idiot and had them face the wrong way...

08-11-2010, 07:18 PM	#790
shiftdrift Nissanaholic! Join Date: Nov 2009 Location: indiana Age: 33 Posts: 2,242 Trader Rating: (42) Feedback Score: 42 reviews	details on where to get/when he gets the digital fuel gauge back in stock!

08-11-2010, 09:39 PM	#795
Donkey Kong BANNED Join Date: Aug 2010 Location: Florida Age: 37 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews

08-11-2010, 10:10 PM	#796
killer240 Post Whore! Join Date: Jun 2009 Location: Pair of dice, Norcal Age: 34 Posts: 2,621 Trader Rating: (24) Feedback Score: 24 reviews	yo broadfield, what can you not do? lol

08-11-2010, 10:37 PM	#798
Xbroke_kidX Zilvia FREAK! Join Date: Apr 2008 Location: Mordor Posts: 1,113 Trader Rating: (8) Feedback Score: 8 reviews	Broadield interior GOD.

08-12-2010, 03:27 PM	#801
sr20drifter1 Zilvia FREAK! Join Date: Feb 2006 Location: Katanga Posts: 1,008 Trader Rating: (66) Feedback Score: 66 reviews	Interior Sorry guys. I have to whore my car a little. This set up is just amazing. __________________ DAOUD AKA KONGO DAVE

08-12-2010, 04:59 PM	#802
scottie Zilvia FREAK! Join Date: Nov 2003 Location: asluT Posts: 1,287 Trader Rating: (11) Feedback Score: 11 reviews	^^^^ where is the night shots?!

08-12-2010, 05:42 PM	#804
Mister.E Post Whore! Join Date: Oct 2007 Location: Las Vegas Age: 39 Posts: 4,590 Trader Rating: (53) Feedback Score: 53 reviews	man i need to find somebody who wants to trade all of their white faced Defi's for my BF's. im really digging the white faced ones nowadays.

08-14-2010, 03:28 AM	#809
deadghost Zilvia FREAK! Join Date: Aug 2007 Location: az Posts: 1,230 Trader Rating: (21) Feedback Score: 21 reviews	Got my fabric back from the cleaners today, lazy ass cleaner lady took so much time that I came up on a clean black zeta II. Finding a red Brix is going to be a bitch.