** drag zilvians chime in** - Page 33 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jr_ss · 06-05-2013, 04:15 PM

Quote:

Originally Posted by Flicktitty

I've been keeping an eye open for Q45/Z32 stuff to swap into the coupe hopefully can find it this summer so i can do it over winter.

Junkyards generally have them. I know I've come across them multiple times on my jyard excursions.

B92PPEARL240 · 06-05-2013, 05:54 PM

Quote:

Originally Posted by slow92

^^^Sounds like your best option, especially if you are breaking axles. I am surprised Santos hasn't chimed in here yet. I think he runs a R32 diff with J30 axles and was making close to 600whp and was using a 2 step or launch control on drag radials.

The Q45 seems to be the best option unless you have really deep pockets and step up to a Mazworx 9 inch rear end and then you will never ever have to worry about breaking another axle.

Just keep us updated because life happened and my care won't be up and running until next summer. I am curious how the 3.59 gears are going to react on my SR22.

BTW where in Georgia are you?

I'm in Augusta about 1.5 hrs from Atlanta. My pockets definatly are not deep lol. So no 9 inch for me. I'm running radials but no 2 step, had to run the diff swap by the wife but it's a go now lmao.

Flicktitty · 06-05-2013, 06:03 PM

Quote:

Originally Posted by jr_ss

Junkyards generally have them. I know I've come across them multiple times on my jyard excursions.

We don't really ever have Z32's in yards near me. gonna have to widen my search area.

jr_ss · 06-05-2013, 06:07 PM

Z32's are becoming harder to find in the yards, but Q45's are still frequenting the yards.

slow92 · 06-05-2013, 06:25 PM

Ya the hardest piece of the setup to find is the z32 axle. Everyone wants to sell them for $200 used but you can get a remanufractured one from Autozone for that price. I pulled my q45 diff, axle, and hubs from picknpull for $170.

BPearl, I know where you are at. I lived in Savannah for 5 years and I loved it. I wish I could move back there.

B92PPEARL240 · 06-05-2013, 08:45 PM

No doubt slow92 savannah is nice, I was born for the beach

So slow gave me some good info on the brakes and swap, but say I want to be a cheap ass and swap the q45, axles and hubs from q45/z32tt, can I just use stock s14 rotors and keep my stock rear brakes. Searched a bunch, most threads are for upgrading the q45 brakes to s13 all around. If at all possible I'd like to just pop the diff,axles and hubs in and throw on some rotors that will work w/ the brakes.

Gotta buy rims as well so looking to budget. Maybe talk the wife into buying me some weld draglites

slow92 · 06-06-2013, 05:45 PM

I wouldn't see why not. I was assuming that you wanted to use the stock rear brakes with the z31 caliper brackets. Everything should mount up and you should be able to use the stock brakes.

My stock s13 caliper brackets and calipers bolted up right up to the q45 hubs.

zurud · 06-11-2013, 10:17 AM

Do guys feel frustrated with the s13 driveline? I know I do. Every time I go to drag strip I break stuff. I am afraid going to drag strip anymore because stuff will break. The only thing that break on my supra is clutch. I have to replace that every year . But that car is way too heavy. I have z32 tranny, 3" driveshaft, j30 axles and s13 2 way diff. I am afraid that diff will break at the strip next time I go to the strip. I am only at 350 whp.

slow92 · 06-11-2013, 11:56 AM

I don't see how you would break the diff at that horsepower level, unless you have wheel hop. Still, I would think that you would break an axle before the diff. Plus, Santos was making close to 600whp on J30 axles and was using drag radials. So it may be the way you drive that cause parts failure.

turbo-2ns · 06-11-2013, 12:40 PM

axles will be the weak link

2muchboost · 06-11-2013, 12:41 PM

@Zurud.....Not saying its the only option but the Q45 diff setup has proven to take a beating without much concern. Do you have solid diff bushings installed?

Also, fellow member bought RaceStar DragStar's 15x8 with 5.25bs and they cleared the Z32 rear brakes on an S14.....no spacer needed.

Oskirocket · 06-11-2013, 07:02 PM

^^ Racestars have massive brake clearance....unfortunately they do not offer anything higher than a 5.25" offset (~25mm) on a 15x8 rim. I test fitted these rims and clear Z32 rear brakes with NO PROBLEM...
I also found out, the hard way, that Weld prostars (15x8 6.5"BS) DO NOT clear z32 brakes without a spacer..

Paul
my .02c

turbo-2ns · 06-11-2013, 07:09 PM

the pro stars will fit you just have to get the right "pad height" i wat to say its the high pad ,but 8 d8nt remember

Oskirocket · 06-11-2013, 07:28 PM

I believe the "pad height" option are only avaiable for WELD RT-S rims not prostars...I just check their webiste and they do not offer a option to select what "pad height" to order for PROSTARS..
On the other hand they do offer the "pad height" option for 15" S71 Wheels...

Maybe i am not finding it??? can you dig up a link..I still have the prostars but i was just gonna ship them back to summit since i dont want to run a spacer..

Paul

2muchboost · 06-11-2013, 08:47 PM

Correction....5.25" BS on the DragStars.

turbo-2ns · 06-11-2013, 09:44 PM

Quote:

Originally Posted by Oskirocket

I believe the "pad height" option are only avaiable for WELD RT-S rims not prostars...I just check their webiste and they do not offer a option to select what "pad height" to order for PROSTARS..
On the other hand they do offer the "pad height" option for 15" S71 Wheels...

Maybe i am not finding it??? can you dig up a link..I still have the prostars but i was just gonna ship them back to summit since i dont want to run a spacer..

Paul

I ordered a set by phone from weld a few years ago for a 300zx and they asked for pad height had me measure few things and had the wheels in a few weeks

sr20s13abel · 06-11-2013, 11:02 PM

MY S13 HASNT BROKE ANYTHING IN YEARS...

SOME TESTING AT THE 1/8 MILE BRAKING AND ONE FULL PASS...

TOMEI 2WAY LSD 1000HP DSS AXLES

zurud · 06-12-2013, 08:54 AM

That's impressive sr20s13abel. However what is stock in your s13 driveline? What is your setup?. I like to have numbers like yours someday. q45 diff is r200 just like s13 diff. How come it is stronger than s13 diff?

turbo-2ns · 06-12-2013, 09:09 AM

The Q45 has the 6-bolt 30-spline axles, hubs, and output shafts like the 300ZX TT

sr20s13abel · 06-12-2013, 11:01 AM

Z32 tranny with mazworx kit.. s13 pumpkin with tomei 2way lsd.. dss 1000hp axles and z32 5 lug rear hubs.. thats it.

26x10 mt et drags. @14psi 15x8 5.5 backspace weld dradlglites.

slow92 · 06-12-2013, 11:42 AM

^^^^those are some good times. What horsepower are you making? Do u have a cage in your car? If so, did you buy a prefabbed one or did you have a shop make one for you?

sr20s13abel · 06-12-2013, 12:53 PM

Quote:

Originally Posted by slow92

^^^^those are some good times. What horsepower are you making? Do u have a cage in your car? If so, did you buy a prefabbed one or did you have a shop make one for you?

Thanks.. Currently making 740whp @33psi soon to be at 40psi and a 50 small shot to wake him up.. I dont have a cage yet thats why I brake at the end.

but cage is on the plans too.. it needs to be an NHRA certified cage along with a parachute. .. also I been told by track officials that I need an NHRA license as well..

at this point its just too much for a street car.. I would like to throw in a g-force transmission and make it a track only car..

bc. · 06-12-2013, 01:17 PM

Quote:

Originally Posted by sr20s13abel

Thanks.. Currently making 740whp @33psi soon to be at 40psi and a 50 small shot to wake him up.. I dont have a cage yet thats why I brake at the end.

but cage is on the plans too.. it needs to be an NHRA certified cage along with a parachute. .. also I been told by track officials that I need an NHRA license as well..

at this point its just too much for a street car.. I would like to throw in a g-force transmission and make it a track only car..

It can't be that hard to get an NHRA license? The cage can be expensive though.

turbo-2ns · 06-12-2013, 01:32 PM

license requires a form, money and 1 half pass, 4 moderate passes and 2 full passes faster than 9.99 or 135mph, in which the track must sign off on the 6 passes
plus you have to pay to be an nhra member which is more than the license itself lol

sr20s13abel · 06-12-2013, 01:35 PM

Quote:

Originally Posted by turbo-2ns

license requires a form, money and 1 half pass, 4 moderate passes and 2 full passes faster than 9.99 or 135mph, in which the track must sign off on the 6 passes
plus you have to pay to be an nhra member which is more than the license itself lol

Yes sir.. the local track can do it.. passes have to be faster the 6.3 @ 1/8 mile.. plus the physical exam or something I heard. . The most difficult part is all the safety requirements. . My car is very consistent even though am banging gears..

turbo-2ns · 06-12-2013, 01:47 PM

you can do the passes on some one elses car if yours is not up to safty spec

sr20s13abel · 06-12-2013, 01:51 PM

Thats also true.. but if my car doesn't meet the requirements they wont allow me to race it no matter how many licenses I have. Lol they dick heads at the local track..they hate imports. And yet is mostly hondas running there every week..

Stumped · 06-12-2013, 09:01 PM

Nhra is just like any other big business. Its sad really. I like IHRA tracks, they don't require as much bs as NHRA.

slow92 · 06-14-2013, 02:38 PM

Abel what turbo are you running?

sr20s13abel · 06-14-2013, 02:55 PM

Quote:

Originally Posted by slow92

Abel what turbo are you running?

Precision 6766 t3

06-05-2013, 06:07 PM	#964
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,413 Trader Rating: (35) Feedback Score: 35 reviews	Z32's are becoming harder to find in the yards, but Q45's are still frequenting the yards. __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.

06-05-2013, 06:25 PM	#965
slow92 Zilvia Junkie Join Date: Jun 2008 Location: NV Posts: 423 Trader Rating: (16) Feedback Score: 16 reviews	Ya the hardest piece of the setup to find is the z32 axle. Everyone wants to sell them for $200 used but you can get a remanufractured one from Autozone for that price. I pulled my q45 diff, axle, and hubs from picknpull for $170. BPearl, I know where you are at. I lived in Savannah for 5 years and I loved it. I wish I could move back there. __________________ Sr22 in the works Last edited by slow92; 06-05-2013 at 07:35 PM..

06-06-2013, 05:45 PM	#967
slow92 Zilvia Junkie Join Date: Jun 2008 Location: NV Posts: 423 Trader Rating: (16) Feedback Score: 16 reviews	I wouldn't see why not. I was assuming that you wanted to use the stock rear brakes with the z31 caliper brackets. Everything should mount up and you should be able to use the stock brakes. My stock s13 caliper brackets and calipers bolted up right up to the q45 hubs. __________________ Sr22 in the works

06-11-2013, 11:56 AM	#969
slow92 Zilvia Junkie Join Date: Jun 2008 Location: NV Posts: 423 Trader Rating: (16) Feedback Score: 16 reviews	I don't see how you would break the diff at that horsepower level, unless you have wheel hop. Still, I would think that you would break an axle before the diff. Plus, Santos was making close to 600whp on J30 axles and was using drag radials. So it may be the way you drive that cause parts failure. __________________ Sr22 in the works

06-11-2013, 12:41 PM	#971
2muchboost Nissanaholic! Join Date: Apr 2003 Location: Austin, TX Age: 40 Posts: 2,183 Trader Rating: (33) Feedback Score: 33 reviews	@Zurud.....Not saying its the only option but the Q45 diff setup has proven to take a beating without much concern. Do you have solid diff bushings installed? Also, fellow member bought RaceStar DragStar's 15x8 with 5.25bs and they cleared the Z32 rear brakes on an S14.....no spacer needed. Last edited by 2muchboost; 06-11-2013 at 08:47 PM..

06-05-2013, 08:45 PM	#966
B92PPEARL240 Join Date: Nov 2012 Location: georgia Age: 39 Posts: 21 Trader Rating: (0) Feedback Score: 0 reviews	No doubt slow92 savannah is nice, I was born for the beach So slow gave me some good info on the brakes and swap, but say I want to be a cheap ass and swap the q45, axles and hubs from q45/z32tt, can I just use stock s14 rotors and keep my stock rear brakes. Searched a bunch, most threads are for upgrading the q45 brakes to s13 all around. If at all possible I'd like to just pop the diff,axles and hubs in and throw on some rotors that will work w/ the brakes. Gotta buy rims as well so looking to budget. Maybe talk the wife into buying me some weld draglites

06-11-2013, 10:17 AM	#968
zurud Zilvia Junkie Join Date: Aug 2009 Location: evansville, in Posts: 391 Trader Rating: (4) Feedback Score: 4 reviews	Do guys feel frustrated with the s13 driveline? I know I do. Every time I go to drag strip I break stuff. I am afraid going to drag strip anymore because stuff will break. The only thing that break on my supra is clutch. I have to replace that every year . But that car is way too heavy. I have z32 tranny, 3" driveshaft, j30 axles and s13 2 way diff. I am afraid that diff will break at the strip next time I go to the strip. I am only at 350 whp.

06-11-2013, 12:40 PM	#970
turbo-2ns Zilvia Junkie Join Date: Oct 2012 Location: dfw texas Age: 36 Posts: 372 Trader Rating: (4) Feedback Score: 4 reviews	axles will be the weak link

06-11-2013, 07:02 PM	#972
Oskirocket Zilvia Addict Join Date: Jun 2002 Location: Queens, NYC Age: 42 Posts: 973 Trader Rating: (32) Feedback Score: 32 reviews	^^ Racestars have massive brake clearance....unfortunately they do not offer anything higher than a 5.25" offset (~25mm) on a 15x8 rim. I test fitted these rims and clear Z32 rear brakes with NO PROBLEM... I also found out, the hard way, that Weld prostars (15x8 6.5"BS) DO NOT clear z32 brakes without a spacer.. Paul my .02c

06-11-2013, 07:09 PM	#973
turbo-2ns Zilvia Junkie Join Date: Oct 2012 Location: dfw texas Age: 36 Posts: 372 Trader Rating: (4) Feedback Score: 4 reviews	the pro stars will fit you just have to get the right "pad height" i wat to say its the high pad ,but 8 d8nt remember

06-11-2013, 07:28 PM	#974
Oskirocket Zilvia Addict Join Date: Jun 2002 Location: Queens, NYC Age: 42 Posts: 973 Trader Rating: (32) Feedback Score: 32 reviews	I believe the "pad height" option are only avaiable for WELD RT-S rims not prostars...I just check their webiste and they do not offer a option to select what "pad height" to order for PROSTARS.. On the other hand they do offer the "pad height" option for 15" S71 Wheels... Maybe i am not finding it??? can you dig up a link..I still have the prostars but i was just gonna ship them back to summit since i dont want to run a spacer.. Paul

06-11-2013, 08:47 PM	#975
2muchboost Nissanaholic! Join Date: Apr 2003 Location: Austin, TX Age: 40 Posts: 2,183 Trader Rating: (33) Feedback Score: 33 reviews	Correction....5.25" BS on the DragStars.

06-11-2013, 11:02 PM	#977
sr20s13abel Leaky Injector Join Date: Nov 2010 Location: los angeles Age: 38 Posts: 108 Trader Rating: (0) Feedback Score: 0 reviews	MY S13 HASNT BROKE ANYTHING IN YEARS... SOME TESTING AT THE 1/8 MILE BRAKING AND ONE FULL PASS... TOMEI 2WAY LSD 1000HP DSS AXLES Last edited by sr20s13abel; 06-12-2013 at 01:45 PM..

06-12-2013, 08:54 AM	#978
zurud Zilvia Junkie Join Date: Aug 2009 Location: evansville, in Posts: 391 Trader Rating: (4) Feedback Score: 4 reviews	That's impressive sr20s13abel. However what is stock in your s13 driveline? What is your setup?. I like to have numbers like yours someday. q45 diff is r200 just like s13 diff. How come it is stronger than s13 diff?

06-12-2013, 09:09 AM	#979
turbo-2ns Zilvia Junkie Join Date: Oct 2012 Location: dfw texas Age: 36 Posts: 372 Trader Rating: (4) Feedback Score: 4 reviews	The Q45 has the 6-bolt 30-spline axles, hubs, and output shafts like the 300ZX TT

06-12-2013, 11:01 AM	#980
sr20s13abel Leaky Injector Join Date: Nov 2010 Location: los angeles Age: 38 Posts: 108 Trader Rating: (0) Feedback Score: 0 reviews	Z32 tranny with mazworx kit.. s13 pumpkin with tomei 2way lsd.. dss 1000hp axles and z32 5 lug rear hubs.. thats it. 26x10 mt et drags. @14psi 15x8 5.5 backspace weld dradlglites. Last edited by sr20s13abel; 06-12-2013 at 12:54 PM..

06-12-2013, 11:42 AM	#981
slow92 Zilvia Junkie Join Date: Jun 2008 Location: NV Posts: 423 Trader Rating: (16) Feedback Score: 16 reviews	^^^^those are some good times. What horsepower are you making? Do u have a cage in your car? If so, did you buy a prefabbed one or did you have a shop make one for you? __________________ Sr22 in the works

06-12-2013, 01:32 PM	#984
turbo-2ns Zilvia Junkie Join Date: Oct 2012 Location: dfw texas Age: 36 Posts: 372 Trader Rating: (4) Feedback Score: 4 reviews	license requires a form, money and 1 half pass, 4 moderate passes and 2 full passes faster than 9.99 or 135mph, in which the track must sign off on the 6 passes plus you have to pay to be an nhra member which is more than the license itself lol

06-12-2013, 01:47 PM	#986
turbo-2ns Zilvia Junkie Join Date: Oct 2012 Location: dfw texas Age: 36 Posts: 372 Trader Rating: (4) Feedback Score: 4 reviews	you can do the passes on some one elses car if yours is not up to safty spec

06-12-2013, 01:51 PM	#987
sr20s13abel Leaky Injector Join Date: Nov 2010 Location: los angeles Age: 38 Posts: 108 Trader Rating: (0) Feedback Score: 0 reviews	Thats also true.. but if my car doesn't meet the requirements they wont allow me to race it no matter how many licenses I have. Lol they dick heads at the local track..they hate imports. And yet is mostly hondas running there every week..

06-12-2013, 09:01 PM	#988
Stumped Join Date: Jan 2013 Location: Carlisle, PA Posts: 45 Trader Rating: (0) Feedback Score: 0 reviews	Nhra is just like any other big business. Its sad really. I like IHRA tracks, they don't require as much bs as NHRA.

06-14-2013, 02:38 PM	#989
slow92 Zilvia Junkie Join Date: Jun 2008 Location: NV Posts: 423 Trader Rating: (16) Feedback Score: 16 reviews	Abel what turbo are you running? __________________ Sr22 in the works