The "Identify this" thread - Page 330 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

JaredP · 02-01-2012, 04:30 PM

Quote:

Originally Posted by mattatat

yeh, they're bowed out aswell though

still gives me hope for not running stupid camber. almost full contact on 295's...hell ya

Driftacular · 02-01-2012, 05:23 PM

the Z's fender flares???
obv wider than regular ZG fender flares... so what brand are they?

jacobzking · 02-01-2012, 08:12 PM

I just bought this SR from JDM engines in Richardson TX (local to me) and it came with Nismo 555, s15 t28 bb, silk road 3 puck clutch, appears to have a metal head gasket, an ECU that is marked (as best as I can read): 550cc inj, z32, t67 (?), tomei... so it may even have tome cams. my question is... can you identify this exhaust manifold?

EliteJDM · 02-02-2012, 12:09 PM

HKS knockoff

jacobzking · 02-02-2012, 06:47 PM

Quote:

Originally Posted by EliteJDM

HKS knockoff

nope. any other guesses? single short tubes. 1/2" flange. solid welds.

nissanguy11 · 02-02-2012, 09:19 PM

Quote:

Originally Posted by jacobzking

I just bought this SR from JDM engines in Richardson TX (local to me) and it came with Nismo 555, s15 t28 bb, silk road 3 puck clutch, appears to have a metal head gasket, an ECU that is marked (as best as I can read): 550cc inj, z32, t67 (?), tomei... so it may even have tome cams. my question is... can you identify this exhaust manifold?

could be hks, greddy/trust?

*jspecusa* · 02-03-2012, 01:44 AM

Hey Jacob,
It's HPI, sell it use the stock manifold.
All the aftermarket ones cracks even the $1,000 hks ones.
Stock is the best for reliability.
Good luck,

Sam

Quote:

Originally Posted by jacobzking

I just bought this SR from JDM engines in Richardson TX (local to me) and it came with Nismo 555, s15 t28 bb, silk road 3 puck clutch, appears to have a metal head gasket, an ECU that is marked (as best as I can read): 550cc inj, z32, t67 (?), tomei... so it may even have tome cams. my question is... can you identify this exhaust manifold?

Neon_rain519 · 02-03-2012, 02:05 AM

Looks like a JIC manifold...

jacobzking · 02-03-2012, 12:18 PM

nope, nope and nope. lol. its hard to tell from the crappy photo that i provided, but the 1st tube (closest to the front of the motor) has a single, and short, tight bend. all the other manifolds have it to where the first tube kind of has 2 angles. this one is just one short, symmetrical bend that runs parallel with the flange. i'll try and take another photo.

*Wake* · 02-03-2012, 12:19 PM

Yeah or HPI lol

I was gonna say that but figured there would be a label.

camo240 · 02-03-2012, 08:00 PM

i bought a parts car for $100 with sr20det, bla bla bla im parting out but i cant find this wing online anywhere the guy said it was some kind of rare jdm wing? idk maybe u guys can figure it out...

camo240 · 02-03-2012, 08:25 PM

having trouble with other pics... be up in a min

wbarrett48473 · 02-04-2012, 05:54 AM

Quote:

Originally Posted by camo240

i bought a parts car for $100 with sr20det, bla bla bla im parting out but i cant find this wing online anywhere the guy said it was some kind of rare jdm wing? idk maybe u guys can figure it out...

Not rare.

S14 Navan Wing

camo240 · 02-04-2012, 09:20 AM

anyone have pics of this navan wing on a s13? or anyone know a guy named lee from kingston pa area? hes the one who built this car. thanks for help everyone

camo240 · 02-04-2012, 09:23 AM

idk it looks very close but i dont think thats it bc this was exacct fit to the s13s body and i cant find a single pick of the navan pic on a s13. and im pretty sure this is taller

EliteJDM · 02-04-2012, 09:41 AM

that is NOT the Navan wing,

this is

Elite JDM - Product Details

camo240 · 02-04-2012, 09:49 AM

didnt think so any ideas what this one is? i cant find it anywhere

*jspecusa* · 02-04-2012, 06:25 PM

How would you know it's not a HPI?
you havn't even seen their ad or website.
I know for sure it's HPI cuz they gave me one to test
on my yellow s13 back in 2004.
They are the only one with the last 2 runner up like that.

Quote:

Originally Posted by jacobzking

nope, nope and nope. lol. its hard to tell from the crappy photo that i provided, but the 1st tube (closest to the front of the motor) has a single, and short, tight bend. all the other manifolds have it to where the first tube kind of has 2 angles. this one is just one short, symmetrical bend that runs parallel with the flange. i'll try and take another photo.

camo240 · 02-04-2012, 09:34 PM

Quote:

Originally Posted by camo240

idk it looks very close but i dont think thats it bc this was exacct fit to the s13s body and i cant find a single pick of the navan pic on a s13. and im pretty sure this is taller

anyone have any ideas???? usually someone always nails this stuff quick... i have abs no idea besides it not a navan,... thanks

jacobzking · 02-04-2012, 10:48 PM

Quote:

Originally Posted by jspecusa

How would you know it's not a HPI?
you havn't even seen their ad or website.
I know for sure it's HPI cuz they gave me one to test
on my yellow s13 back in 2004.
They are the only one with the last 2 runner up like that.

ok, i looked for some hpi photos and what i saw looked different.

Tempo · 02-05-2012, 06:28 AM

anyone know the name of the rim in this pic?

ILoveMyRHS13 · 02-05-2012, 09:22 AM

Quote:

Originally Posted by Tempo

anyone know the name of the rim in this pic?

Work Rezax, I believe.

Tempo · 02-05-2012, 03:54 PM

Quote:

Originally Posted by ILoveMyRHS13

Work Rezax, I believe.

i thought that too but i got that pic form a vid where one car had rezax(no the one in my pic) and this one had something similar to rezax, has a Z center cap and the spoke design is a little shorter and fatter, and the spokes split a little later compared to rezax.

ShakotanGazelle · 02-05-2012, 08:16 PM

what wheels are these?

JaredP · 02-05-2012, 08:21 PM

look like re-lipped bbs's to me

ShakotanGazelle · 02-05-2012, 08:48 PM

Quote:

Originally Posted by JaredP

look like re-lipped bbs's to me

thats what i thought at first, but ive never seen BBS mesh without anysort of centercaps..

240sx with rb26=BEAST!!!! · 02-05-2012, 09:34 PM

Does anyone know the name of the rims in the s13.4 at the bottom of this picture?

ZenkiKid · 02-05-2012, 10:51 PM

MHT Chicanes. There's only one set and youre looking at them.

95KA-Turbo · 02-05-2012, 11:19 PM

Quote:

Originally Posted by ShakotanGazelle

what wheels are these?
[]http://farm8.staticflickr.com/7019/6813896641_53aae58de7_b.jpg[/img]

They are VIP Modular VX110s. I thought they were Rotiforms, but I did a little searching and apparently VIP Modular made him those wheels one-off before they were ever offered by them. I'm pretty sure you can buy them now.

Here's a shot where you can see the center cap:

camo240 · 02-06-2012, 08:50 AM

somebody has to know what kind of wing this is right? u guys figure out that a rim is made one off for a guy u have to know this lol any ideas would help i know its not navan s14 wing its off a s13 and fit the body perfectly. thanks

[/QUOTE]

02-03-2012, 02:05 AM	#9878
Neon_rain519 Zilvia Member Join Date: Dec 2009 Location: canada Age: 39 Posts: 150 Trader Rating: (0) Feedback Score: 0 reviews	Looks like a JIC manifold... Last edited by Neon_rain519; 02-03-2012 at 02:39 AM..

02-03-2012, 12:19 PM	#9880
Wake Premium Member Join Date: Dec 2003 Location: Santa Cruz, ca Age: 41 Posts: 6,699 Trader Rating: (8) Feedback Score: 8 reviews	Yeah or HPI lol I was gonna say that but figured there would be a label. __________________ S.P.P.S. Member #00 CoUpe LOve Member #00

02-03-2012, 08:00 PM	#9881
camo240 Zilvia Member Join Date: Jan 2012 Location: scranton pa Age: 35 Posts: 184 Trader Rating: (3) Feedback Score: 3 reviews	unknown wing from a s13 parts car i bought a parts car for $100 with sr20det, bla bla bla im parting out but i cant find this wing online anywhere the guy said it was some kind of rare jdm wing? idk maybe u guys can figure it out...

02-05-2012, 06:28 AM	#9891
Tempo Zilvia Addict Join Date: Dec 2010 Location: San Diego, CA Posts: 957 Trader Rating: (39) Feedback Score: 39 reviews	anyone know the name of the rim in this pic? __________________ IG - allen.kerose

02-05-2012, 10:51 PM	#9898
ZenkiKid Post Whore! Join Date: Nov 2005 Location: Nowhere Age: 34 Posts: 3,285 Trader Rating: (9) Feedback Score: 9 reviews	MHT Chicanes. There's only one set and youre looking at them. __________________ http://www.nissanroadracing.com/

02-01-2012, 05:23 PM	#9872
Driftacular Join Date: Mar 2009 Location: Toronto Posts: 21 Trader Rating: (0) Feedback Score: 0 reviews	the Z's fender flares??? obv wider than regular ZG fender flares... so what brand are they?

02-02-2012, 12:09 PM	#9874
EliteJDM Zilvia Member Join Date: Jan 2009 Location: Philadelphia Posts: 173 Trader Rating: (0) Feedback Score: 0 reviews	HKS knockoff

02-03-2012, 12:18 PM	#9879
jacobzking Zilvia Member Join Date: Nov 2011 Location: Frisco, TX Age: 43 Posts: 288 Trader Rating: (3) Feedback Score: 3 reviews	nope, nope and nope. lol. its hard to tell from the crappy photo that i provided, but the 1st tube (closest to the front of the motor) has a single, and short, tight bend. all the other manifolds have it to where the first tube kind of has 2 angles. this one is just one short, symmetrical bend that runs parallel with the flange. i'll try and take another photo.

02-03-2012, 08:25 PM	#9882
camo240 Zilvia Member Join Date: Jan 2012 Location: scranton pa Age: 35 Posts: 184 Trader Rating: (3) Feedback Score: 3 reviews	having trouble with other pics... be up in a min

02-04-2012, 09:20 AM	#9884
camo240 Zilvia Member Join Date: Jan 2012 Location: scranton pa Age: 35 Posts: 184 Trader Rating: (3) Feedback Score: 3 reviews	anyone have pics of this navan wing on a s13? or anyone know a guy named lee from kingston pa area? hes the one who built this car. thanks for help everyone

02-04-2012, 09:23 AM	#9885
camo240 Zilvia Member Join Date: Jan 2012 Location: scranton pa Age: 35 Posts: 184 Trader Rating: (3) Feedback Score: 3 reviews	idk it looks very close but i dont think thats it bc this was exacct fit to the s13s body and i cant find a single pick of the navan pic on a s13. and im pretty sure this is taller

02-04-2012, 09:41 AM	#9886
EliteJDM Zilvia Member Join Date: Jan 2009 Location: Philadelphia Posts: 173 Trader Rating: (0) Feedback Score: 0 reviews	that is NOT the Navan wing, this is Elite JDM - Product Details

02-04-2012, 09:49 AM	#9887
camo240 Zilvia Member Join Date: Jan 2012 Location: scranton pa Age: 35 Posts: 184 Trader Rating: (3) Feedback Score: 3 reviews	didnt think so any ideas what this one is? i cant find it anywhere

02-05-2012, 08:16 PM	#9894
ShakotanGazelle Zilvia Junkie Join Date: Apr 2011 Location: DFW, TX Posts: 514 Trader Rating: (2) Feedback Score: 2 reviews	what wheels are these?

02-05-2012, 08:21 PM	#9895
JaredP Zilvia Junkie Join Date: Dec 2010 Location: Canada Age: 34 Posts: 443 Trader Rating: (5) Feedback Score: 5 reviews	look like re-lipped bbs's to me

02-05-2012, 09:34 PM	#9897
240sx with rb26=BEAST!!!! Join Date: Sep 2011 Location: arizona Posts: 25 Trader Rating: (0) Feedback Score: 0 reviews	Does anyone know the name of the rims in the s13.4 at the bottom of this picture?

02-06-2012, 08:50 AM	#9900
camo240 Zilvia Member Join Date: Jan 2012 Location: scranton pa Age: 35 Posts: 184 Trader Rating: (3) Feedback Score: 3 reviews	somebody has to know what kind of wing this is right? u guys figure out that a rim is made one off for a guy u have to know this lol any ideas would help i know its not navan s14 wing its off a s13 and fit the body perfectly. thanks [/QUOTE]