Maximum TIRE(Rubber) fitment thread - Page 34 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ZenkiCam · 06-02-2009, 11:30 PM

Dont have pics atm but....

YOUR CHASSIS: s13

WHEELS: 5zigen FN's 17x8 +35 all corners Spaced to +20 (15mm spacers)

TIRES: Goodyear Eagle F1 GS-D3 235/40/17 (all corners)

MISC DETAILS: Footwerks Coilovers 10k F 6k R

ALIGNMENT SPECS: -1.8* Camber F&R .1 Toe front and 0 rear 6.8 Caster

PURPOSE OF CAR: Street, Touge

black05srt-4 · 06-11-2009, 11:24 PM

Got my 315's mounted on my wheels just gotta install my 5 lug swap stuff tomorrow and ill post up pics! Here is a teaser pic tho..

bshotts · 06-12-2009, 10:59 PM

Looking for suggestions (and yes I've spent countless hours on fitment/max tire threads and even made a fitment spreadsheet) on my next set of possible wheels to go with my 255/35/18 and 275/35/18 FK452s. I originally had 18x10 et+22 and 11.5 et+24 but that was too much stretch and I want to avoid major fender work in front besides a roll (already rolled and pulled in rear).

I've been thinking about SP1s 18x9.5 +22 front and 18x10.5 +30 rears....opinions? That will actually make my front/rear track equal since S14s are naturally 5 mm narrower in rear track. Thanks yall.

black05srt-4 · 06-14-2009, 07:11 PM

Got the passenger rear 5 lug converted and the wheel/tire on. Think im gonna need a 5mm spacer though and yeah i need coilovers asap! Don't mind the primer either it wont be this way for too long.

xs240 · 06-15-2009, 06:16 PM

omg i want

Wheel specs? Size/width/offset?

What about tires other than being 315s...

What about wide fenders? Name brand size etc..

Adam496 · 06-15-2009, 06:20 PM

Did you cut the stock metal when you put those overs on?? If you plan on going low, you are going run into some problems if you didn't.

Getting ready for paint.
Dmax 40mm overs / Hammered flat front fenders
18x9 +12 255/40
18x10 +5 285/30

black05srt-4 · 06-15-2009, 06:36 PM

Wheels are 17x10.5 +27, tires are sumitomo htr z's(cheapest 315 i could find, temp fix till it gets dr's and the motor gets dropped in), overfenders are origin type 2 50mm and yes i did cut the stock metal.

Adam496 · 06-15-2009, 06:41 PM

any pics of the ls6 in?

black05srt-4 · 06-15-2009, 06:42 PM

lol its not in yet, still being built...

Adam496 · 06-15-2009, 06:49 PM

Should be pretty badass when its done

black05srt-4 · 06-15-2009, 06:55 PM

Hope so, a lot of time and money into it haha. Car looks good as well from what i can see man!

gsracer · 06-15-2009, 09:59 PM

since im gonna become a big time drifter now, i needed some spare drift wheels, i found these for a good price so i picked them up, i need to run like a 10mm spacer to get them to sit flush with the 315 azenis though but whatever

black05srt-4 · 06-22-2009, 03:07 PM

Got the other rear 5 lug and wheel/tire put on, lol it def needs to be lowered that's for sure.

EndLeSS8 · 06-24-2009, 04:21 PM

S14
-1.8" drop with KYB AGX
-1.7 camber all around
Prefer not to roll and remove fender liner cuz of rainy weather here, but will if I have to.

Planning to run 245/40/17 in front on a 17x9 +17 offset

Will I need a roll/remove fender lining?

240sxScores · 06-24-2009, 08:35 PM

Quote:

Originally Posted by EndLeSS8

S14
-1.8" drop with KYB AGX
-1.7 camber all around
Prefer not to roll and remove fender liner cuz of rainy weather here, but will if I have to.

Planning to run 245/40/17 in front on a 17x9 +17 offset

Will I need a roll/remove fender lining?

Yes you will probably have to pull out the fender liner and at least hammer the fender lip on the inside flat, with decent pull.

godzillarb · 06-25-2009, 06:35 PM

Quote:

Originally Posted by black05srt-4

Got the passenger rear 5 lug converted and the wheel/tire on. Think im gonna need a 5mm spacer though and yeah i need coilovers asap! Don't mind the primer either it wont be this way for too long.

sumitomo htr? Shittiest tires ever. I spun those bastards at 100mph+

SuicidnS13 · 06-25-2009, 07:05 PM

Quote:

Originally Posted by gsracer

since im gonna become a big time drifter now, i needed some spare drift wheels, i found these for a good price so i picked them up, i need to run like a 10mm spacer to get them to sit flush with the 315 azenis though but whatever

You are joking about the big time drifter thing right?

black05srt-4 · 06-25-2009, 07:58 PM

Quote:

Originally Posted by godzillarb

sumitomo htr? Shittiest tires ever. I spun those bastards at 100mph+

haha yeah they are a cheap fix till the motor goes in and dr's are needed.

EndLeSS8 · 06-25-2009, 07:59 PM

Quote:

Originally Posted by 240sxScores

Yes you will probably have to pull out the fender liner and at least hammer the fender lip on the inside flat, with decent pull.

Any pics of what it would look like? I searched a lot, but I've only found S14s with aftermarket overfenders running 245/40/17 on 17x9 +17

KoukiMonsta · 06-26-2009, 12:46 AM

Quote:

Originally Posted by SuicidnS13

You are joking about the big time drifter thing right?

i fuking hope so..........

s13 @ fullboost · 06-26-2009, 01:10 AM

Oh god not another big time drifter hahah

gsracer · 06-26-2009, 06:43 AM

big time yea, lol, no just having fun with the car, in everyway possible, drift drag road racing w/e

The bottom line is im not sponsored by falken and drifting on 315 azenis is too damned expensive so heres some pics

Got some tires mounted , 275/35/18 azenis st115s, unfortunatly its pretty stretched on this wheel, ill need more spacers....

I know ..... I fail...

smelly240 · 06-26-2009, 06:45 AM

Quote:

Originally Posted by EndLeSS8

Any pics of what it would look like? I searched a lot, but I've only found S14s with aftermarket overfenders running 245/40/17 on 17x9 +17

I have 245-40-17 on a 9.5 +8 with 20mm (s13)

i can take a pic if u'd like

xs240 · 06-26-2009, 11:47 AM

i would like to start a new trend... drifting with 315s, 335s, 355s, lmao... sponsor me now.

gsracer · 06-26-2009, 01:08 PM

i almosot put 335s on it

moedigzz · 07-02-2009, 09:19 PM

could I fit 18x9+20 and 18x10+18 with 255/40's and 275/35's on a s13? Sorry, I'm a noob with fitment.

EndLeSS8 · 07-03-2009, 05:44 PM

S14
-1.8" drop all around
17x9 +17 offset front
18x9.5 +12 offset rear
-1.7 degrees camber all around

Will a 225/45/17 stretch on a 17x9 for FRONT and 255/35/18 for a 18x9.5 REAR look normal?

Which REAR tire size will look the most normal/good with a 225/45/17 on 17x9 front stretch?

255/35/18?
235/40/18 stretch?
245/40/18?

Any thoughts/pictures/advice would be really appreciated. Thanks in advance.

*kingkilburn* · 07-03-2009, 06:05 PM

/\ Wrong thread./\

Try this one.
http://zilvia.net/f/chat/129865-whee...=wheel+fitment

murda-c · 07-05-2009, 08:45 PM

Does anyone know if a 255/40/17F 275/40/17R will fit with my stock shocks on some 17x9 +28s?

a friend of mine is selling me his mustang wheels and i want to know if they'll fit before i am able to get coilovers and spacers.

Also will they fit with stance coilovers?

I tried to search and i couldn't find anyone with the same tire size and offset with stock shocks.

I'm only using the tires because i'm getting a good deal on them, lol.

longfellow · 07-07-2009, 03:53 PM

NT05s YAY

06-11-2009, 11:24 PM	#992
black05srt-4 Leaky Injector Join Date: Dec 2008 Location: Stl Age: 37 Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	Got my 315's mounted on my wheels just gotta install my 5 lug swap stuff tomorrow and ill post up pics! Here is a teaser pic tho.. __________________ 1991 240 5.3l 4l80e, s366 turbo in the works.

06-14-2009, 07:11 PM	#994
black05srt-4 Leaky Injector Join Date: Dec 2008 Location: Stl Age: 37 Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	Got the passenger rear 5 lug converted and the wheel/tire on. Think im gonna need a 5mm spacer though and yeah i need coilovers asap! Don't mind the primer either it wont be this way for too long. __________________ 1991 240 5.3l 4l80e, s366 turbo in the works.

06-15-2009, 06:36 PM	#997
black05srt-4 Leaky Injector Join Date: Dec 2008 Location: Stl Age: 37 Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	Wheels are 17x10.5 +27, tires are sumitomo htr z's(cheapest 315 i could find, temp fix till it gets dr's and the motor gets dropped in), overfenders are origin type 2 50mm and yes i did cut the stock metal. __________________ 1991 240 5.3l 4l80e, s366 turbo in the works.

06-15-2009, 06:42 PM	#999
black05srt-4 Leaky Injector Join Date: Dec 2008 Location: Stl Age: 37 Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	lol its not in yet, still being built... __________________ 1991 240 5.3l 4l80e, s366 turbo in the works.

06-15-2009, 06:55 PM	#1001
black05srt-4 Leaky Injector Join Date: Dec 2008 Location: Stl Age: 37 Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	Hope so, a lot of time and money into it haha. Car looks good as well from what i can see man! __________________ 1991 240 5.3l 4l80e, s366 turbo in the works.

06-02-2009, 11:30 PM	#991
ZenkiCam Zilvia Addict Join Date: Jun 2007 Location: Atlanta Georgia Posts: 931 Trader Rating: (4) Feedback Score: 4 reviews	Dont have pics atm but.... YOUR CHASSIS: s13 WHEELS: 5zigen FN's 17x8 +35 all corners Spaced to +20 (15mm spacers) TIRES: Goodyear Eagle F1 GS-D3 235/40/17 (all corners) MISC DETAILS: Footwerks Coilovers 10k F 6k R ALIGNMENT SPECS: -1.8* Camber F&R .1 Toe front and 0 rear 6.8 Caster PURPOSE OF CAR: Street, Touge

06-12-2009, 10:59 PM	#993
bshotts Zilvia Junkie Join Date: Jan 2003 Location: Indianapolis, IN Age: 41 Posts: 472 Trader Rating: (13) Feedback Score: 13 reviews	Looking for suggestions (and yes I've spent countless hours on fitment/max tire threads and even made a fitment spreadsheet) on my next set of possible wheels to go with my 255/35/18 and 275/35/18 FK452s. I originally had 18x10 et+22 and 11.5 et+24 but that was too much stretch and I want to avoid major fender work in front besides a roll (already rolled and pulled in rear). I've been thinking about SP1s 18x9.5 +22 front and 18x10.5 +30 rears....opinions? That will actually make my front/rear track equal since S14s are naturally 5 mm narrower in rear track. Thanks yall.

06-15-2009, 06:16 PM	#995
xs240 BANNED Join Date: Oct 2008 Location: . Posts: 437 Trader Rating: (1) Feedback Score: 1 reviews	omg i want Wheel specs? Size/width/offset? What about tires other than being 315s... What about wide fenders? Name brand size etc..

06-15-2009, 06:20 PM	#996
Adam496 Zilvia Addict Join Date: Jul 2006 Location: Jersey Posts: 747 Trader Rating: (19) Feedback Score: 19 reviews	Did you cut the stock metal when you put those overs on?? If you plan on going low, you are going run into some problems if you didn't. Getting ready for paint. Dmax 40mm overs / Hammered flat front fenders 18x9 +12 255/40 18x10 +5 285/30

06-15-2009, 06:41 PM	#998
Adam496 Zilvia Addict Join Date: Jul 2006 Location: Jersey Posts: 747 Trader Rating: (19) Feedback Score: 19 reviews	any pics of the ls6 in?

06-15-2009, 06:49 PM	#1000
Adam496 Zilvia Addict Join Date: Jul 2006 Location: Jersey Posts: 747 Trader Rating: (19) Feedback Score: 19 reviews	Should be pretty badass when its done

06-15-2009, 09:59 PM	#1002
gsracer Zilvia FREAK! Join Date: Mar 2003 Location: Miami Age: 40 Posts: 1,590 Trader Rating: (7) Feedback Score: 7 reviews	since im gonna become a big time drifter now, i needed some spare drift wheels, i found these for a good price so i picked them up, i need to run like a 10mm spacer to get them to sit flush with the 315 azenis though but whatever __________________ ANTI-STRETCH NAZI Vortech Supercharged Vh45de S14 V8nissans.com

06-22-2009, 03:07 PM	#1003
black05srt-4 Leaky Injector Join Date: Dec 2008 Location: Stl Age: 37 Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	Got the other rear 5 lug and wheel/tire put on, lol it def needs to be lowered that's for sure. __________________ 1991 240 5.3l 4l80e, s366 turbo in the works.

06-24-2009, 04:21 PM	#1004
EndLeSS8 Zilvia Junkie Join Date: Nov 2003 Location: Burnaby, Canada Posts: 595 Trader Rating: (7) Feedback Score: 7 reviews	S14 -1.8" drop with KYB AGX -1.7 camber all around Prefer not to roll and remove fender liner cuz of rainy weather here, but will if I have to. Planning to run 245/40/17 in front on a 17x9 +17 offset Will I need a roll/remove fender lining? __________________ 268generation.com -United for His Renown-

06-26-2009, 01:10 AM	#1011
s13 @ fullboost Post Whore! Join Date: Dec 2007 Location: St.Petersburg,FL Posts: 2,549 Trader Rating: (15) Feedback Score: 15 reviews	Oh god not another big time drifter hahah __________________

06-26-2009, 06:43 AM	#1012
gsracer Zilvia FREAK! Join Date: Mar 2003 Location: Miami Age: 40 Posts: 1,590 Trader Rating: (7) Feedback Score: 7 reviews	big time yea, lol, no just having fun with the car, in everyway possible, drift drag road racing w/e The bottom line is im not sponsored by falken and drifting on 315 azenis is too damned expensive so heres some pics Got some tires mounted , 275/35/18 azenis st115s, unfortunatly its pretty stretched on this wheel, ill need more spacers.... I know ..... I fail... __________________ ANTI-STRETCH NAZI Vortech Supercharged Vh45de S14 V8nissans.com

06-26-2009, 11:47 AM	#1014
xs240 BANNED Join Date: Oct 2008 Location: . Posts: 437 Trader Rating: (1) Feedback Score: 1 reviews	i would like to start a new trend... drifting with 315s, 335s, 355s, lmao... sponsor me now.

06-26-2009, 01:08 PM	#1015
gsracer Zilvia FREAK! Join Date: Mar 2003 Location: Miami Age: 40 Posts: 1,590 Trader Rating: (7) Feedback Score: 7 reviews	i almosot put 335s on it __________________ ANTI-STRETCH NAZI Vortech Supercharged Vh45de S14 V8nissans.com

07-02-2009, 09:19 PM	#1016
moedigzz Join Date: Oct 2008 Location: Tampa Age: 42 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	could I fit 18x9+20 and 18x10+18 with 255/40's and 275/35's on a s13? Sorry, I'm a noob with fitment. Last edited by moedigzz; 07-02-2009 at 10:16 PM..

07-03-2009, 05:44 PM	#1017
EndLeSS8 Zilvia Junkie Join Date: Nov 2003 Location: Burnaby, Canada Posts: 595 Trader Rating: (7) Feedback Score: 7 reviews	S14 -1.8" drop all around 17x9 +17 offset front 18x9.5 +12 offset rear -1.7 degrees camber all around Will a 225/45/17 stretch on a 17x9 for FRONT and 255/35/18 for a 18x9.5 REAR look normal? Which REAR tire size will look the most normal/good with a 225/45/17 on 17x9 front stretch? 255/35/18? 235/40/18 stretch? 245/40/18? Any thoughts/pictures/advice would be really appreciated. Thanks in advance. __________________ 268generation.com -United for His Renown-

07-03-2009, 06:05 PM	#1018
kingkilburn Philosopher King Join Date: Aug 2006 Location: FresYes Posts: 3,042 Trader Rating: (0) Feedback Score: 0 reviews	/\ Wrong thread./\ Try this one. http://zilvia.net/f/chat/129865-whee...=wheel+fitment __________________ G O L D E N B E A R R E P U B L I C

07-05-2009, 08:45 PM	#1019
murda-c Post Whore! Join Date: Jan 2007 Location: Montgomery County, MD Age: 36 Posts: 3,197 Trader Rating: (1) Feedback Score: 1 reviews	Does anyone know if a 255/40/17F 275/40/17R will fit with my stock shocks on some 17x9 +28s? a friend of mine is selling me his mustang wheels and i want to know if they'll fit before i am able to get coilovers and spacers. Also will they fit with stance coilovers? I tried to search and i couldn't find anyone with the same tire size and offset with stock shocks. I'm only using the tires because i'm getting a good deal on them, lol. __________________

07-07-2009, 03:53 PM	#1020
longfellow Zilvia Addict Join Date: Apr 2006 Location: Tampa Area Posts: 606 Trader Rating: (2) Feedback Score: 2 reviews	NT05s YAY