Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!*

[m2mike]

Hey Guys,

I got a question, do you think I will be able to fit 18x10.5 +15 offset with 265/35/18 tires on rolled fenders in the rear? or should i go get smaller tires. I am not slammmmed.

btw, this is on a s14

[Machinegun Mike]

Originally Posted by TheRealSy90

16x10 +0 Front 16x10 -12 Rear
Nexen N3000 205/45

man that looks awesome. why would anyone ever need a body kit

[Vancouver S13]

not sure that i qualify but here it is anyway...



18x9 +14 w/ 225/40/18

[Royal13]

^^ Any shots with a side view?

[Vancouver S13]

from a couple of weeks ago before i took the wing off, bad angle, on a slant

[95KA-Turbo]

The rear is acceptable but not amazing (for this thread), and the front is a no-go. From the other pictures it looks like the front pokes too much, and from that last picture it looks like it needs to come down like an inch...and the rear could come down a 1/2 inch easy.

[Drifting-pedobear]

SIIIIIICK


SPECS: 18xBRO +BRO ALLAROUND

[MidwestMyriad]

17x9.5 +22 All Around. 235/40/17 Fuzion Zri fronts, 235/40/17 Dunlop Fm901 rears.

[lixam87]

cmon guys..

[scweet1]

19x12-12
19x10-6
The rear is sitting up a little due to the grass and dirt.

[Z_Spool]

Originally Posted by MidwestMyriad

17x9.5 +nope

Just an fyi, a 5mil spacer with those sizes will get you into the entry level fitment range for a stock body S13. So yeah, get your offset sorted out then take some pics that actually show off said fitment (3/4 shots like the one below yours work just fine) and perhaps run a smaller tire width before posting it in here again and you should be set. Kinda dig the wheels though, make/model?

[Wake]

^^Look like gram light 57 optimise

[4DOOR_LIFE]

Originally Posted by Z_Spool

Just an fyi, a 5mil spacer with those sizes will get you into the entry level fitment range for a stock body S13. So yeah, get your offset sorted out then take some pics that actually show off said fitment (3/4 shots like the one below yours work just fine) and perhaps run a smaller tire width before posting it in here again and you should be set. Kinda dig the wheels though, make/model?

I don't see anything wrong with his specs. I really like his set up. He is running some what wide tires so whats the point of poking the wheels even more??

"entry level fitment range for a stock body" and yours is quite the example right ?? just saying man, I don't think you should be the one to judge peoples cars when you don't have anything to show for it.

<3

[DrifTGeeK510]

ummmmm 4DOOR what are you talking about this is the wheel fitment thread not nice wheels that sit inside my fenders i agree with everything Zspool said he needs a spacer 10mm-15mm and 225/40 all around. and he would be a lot better not golden but better.

[Z_Spool]

Lulz Johnathan, I'm just saying If he wants to be running wider tires with less flush/poke, then there's a thread for that elsewhere, but if he's looking to be herrafrush, then he needs to step his game up. Also don't bring my P.O.S. into this, I know it doesn't belong in this thread yet, that's why I have never posted it here. Doesn't mean I don't know what's up though. Punk.

Also wasn't being judgemental, but actually offering advice. Nothing I had said was meant to harm or offend. Imma hit you up on FB, cause I'm curious what's going on with your vehicle situation at the moment, and I don't feel like further cluttering up this thread.

@wake, I knew they looked familiar, but I assumed they were a knockoff or something because I didn't recall the spokes meeting the lip like his do, and I hadn't seen that finish yet.

[Wake]

Its just lighting and angle.



If it is a knock its the best I have ever seen lol

[Z_Spool]

haha, XXR's steppin their game up?

[fckillerbee]

wheel fitment is overated...it's all about donk flushness! and shitty cars.

[DustinSixOh9]

Originally Posted by wh0aitznic0

Saddens me that 95% of the cars posted in the last few pages are either weak or have brotas or other fake shit.

I thought this was the wheel fitment thread, not the "cry about replica wheels" thread.

[Skyn]

Originally Posted by SaNTi

Ordered them but they're not out yet...

ordered them too 17x10 all 4 soon as they get here

[Skyn]

Originally Posted by SaNTi

Ordered them but they're not out yet...

ordered them too 17x10 all 4 soon as they get here

[Royal_T]

old pic

[Wake]

^^I miss that setup Edafe. Not that it doesnt look good now, any new rotiform action?

Originally Posted by DustinSixOh9

I thought this was the wheel fitment thread, not the "cry about replica wheels" thread.

I thought this was a forum where people could openly share their opinions and disgust with other peoples cheap knock off crap?

[IThaJokaI]

17x9.5 +6 215/45/17, need to get tires on the front 2.

[TheRealSy90]

Originally Posted by Machinegun Mike

man that looks awesome. why would anyone ever need a body kit

Haha, I really want oem skirts

[Drifting-pedobear]

you guys are all just jelly of our XXRs.

[miamiman323]

Sucks to have to be the next asshole to ask if something will fit, but i cant find the answer and ide feel like even more of an ass making a whole thread.

I have a s13 Vert and i want to put 17x10 +20s all around but i want to be able to pull and roll the shit out of my stock fenders till they fit. Ill buy front wide fenders if i have to but id really like to keep it as clean as possible.

Thanks in advanced,
The Asshole

[fckillerbee]

^^^aaaaand what's the question?

[MidwestMyriad]

Haha everyone always so mad on zilvia...relax brosephs, I know my shit isn't super-flush-stretch-whore-spec..glad some of you like it though. And yes, Gram Lights 57 Optimise, no knock-offs, some one find me 18x9.5 +12 of the same wheel!

[waxball88]

17x9 +12 225/45


Hammered fenders, newspaper'd to help me out (this is before it finished settling so its a little high) I'm getting very minor rubbing on drivers side, sidewalls don't show anything i can see yet.