|
North Western States Alaska, Idaho, Montana, Oregon, and Washington. |
|
Thread Tools | Display Modes |
04-24-2016, 09:37 AM | #121 |
Zilvia FREAK!
|
Told you and sorry? lol
The WA - OR run was just going to be among friends and it wouldn't cost anything. I guess if it turned out to be a big thing, a small fee would have been started.
__________________
|
Sponsored Links |
04-24-2016, 02:08 PM | #122 |
Zilvia Member
|
I combed over forced induction today. Probably not for me. Lol ls3 is like 5k to begin with. Boost is gonna cost me at least 5k . Maybe down the road. Lol 700whp will take a lot of mods too. Even if I went like l33 and twins it'd be more than I want to budget. I can always sell the ls and go to a different motor if I want boost and keep everything else the same. But! Parts came in. So, yay. Sorry for the shit pictures. Phone uploads kinda suck.
|
04-25-2016, 09:24 AM | #124 | |
Zilvia Addict
|
Quote:
I just got in a downpipe... waiting for my wideband to come in and then I'll take it to a buddy to have him tig in the bung.
__________________
@schassis.eddi |
|
04-25-2016, 09:38 AM | #126 | |
Zilvia Addict
|
Quote:
I still have a few small parts to gather, I'm hoping to have everything together in a few weeks time. I'm anticipating random things I've forgotten, so maybe in a month. If all goes well, I'll have everything put together in 2-3 weeks. I'm going with the Nismotronic SA, that will come sometime next month.
__________________
@schassis.eddi |
|
04-25-2016, 12:26 PM | #128 |
Zilvia Addict
|
I've always gravitated towards Nismotronic, my buddy Twisty recommended it once and when I dug into their wiki I fell in love. From a DIY perspective, they provide a lot of information and are very transparent with their system. I've looked at RS Enthalpy and Nistune in the past, actually a lot of the KA-T guys I know in the PNW recommend RS Enthalpy... My only turn off with RS Enthalpy is when I've tried to look up info on it, I felt like documentation wasn't readily available for the public.
I may be wrong about that and have looked in the wrong places, but I've always ended up back on Nismotronic's facebook group or their website reading what others are doing with it. Bluetooth? USB? The NEMU board even has an Ethernet port! What for? REMOTE TUNING!? I can literally book dyno time and have the guys at jktuned connected to their SA and do pulls on the dyno over the phone... that right there made me look at Nismotronic closely... They also offer an eTune service where you take street pulls and datalog, you send them the map and data via email and they'll make adjustments to the maps to get you started. At this point, people have told me, well if you want to go DIY why not Megasquirt? Well, I'm not much of a circuit board geek... and I'd probably mess up a megasquirt soldiering things together and forgetting to do something... heh, my ADHD and all...
__________________
@schassis.eddi |
04-25-2016, 10:16 PM | #129 |
Zilvia FREAK!
|
Oh, ok. I didn't know Nismotronic has all of those features.
I really wished Uprev developed their system for the older OBDI system because their system is very easy to follow and understand, similar to what you described. The data logging and getting an e-tune is amazing.
__________________
|
04-27-2016, 09:55 AM | #130 |
Zilvia Member
|
It's crazy how much money you save when you don't pay for your own food, gas, etc when deployed. Plus no income tax helps while out here. I did decide to order MCA X-Race coilovers, i think Josh said they're gonna do 7k / 3.5k, which sounds kinda soft but I trust em.
Nice downpipe! That's pretty kick ass Nismotronic has all that stuff. For the Z I know a company called EcuTek does etune stuff but I don't think they offer it for the 240. I haven't really read into how the ECU is modified on the S-chassis, I'm assuming it's a piggyback style? My Z is tuned with UpREV which just modifies the ECU, plus it'll store up to 3 or 4 different tunes, which I can change via cruise control buttons. So much shit to learn. So little time. LOL |
04-27-2016, 10:50 AM | #131 | |
Zilvia Addict
|
Quote:
Yeah! That's why I'm hoping to get a good base tune with the eTune service. Worst comes to worst I'll bring my car down to Intec Racing. I don't think Bob at Drift Office likes dealing with 240's anymore.
__________________
@schassis.eddi |
|
04-27-2016, 12:00 PM | #132 |
Zilvia FREAK!
|
I did 6K all around on BC Racing coilovers and love it. 7K on a 240 I get, but that 3.5K is a little suspect. To me anyway. In fact, I didn't know they could go that low.
__________________
|
04-28-2016, 06:48 PM | #134 |
Zilvia Junkie
|
|
04-28-2016, 07:44 PM | #135 |
Zilvia FREAK!
|
You drive them on the street or do you track your car as well?
__________________
|
04-29-2016, 02:16 AM | #136 |
Zilvia Junkie
|
|
04-29-2016, 08:17 AM | #137 |
Zilvia FREAK!
|
Ok, cool. It's just that when I see drag car set ups, they tend to have high spring rates like that to reduce the dips and plant the tires to the track.
__________________
|
04-30-2016, 01:55 AM | #138 |
Zilvia Member
|
Yeah I dunno, it seemed pretty soft to me too.. but half the companies said 8k/5k or 9k/6k etc but only MCA factored in my SPL arms, told me to even keep the sway bars stock for now and to see how body roll is because it might be too stiff. I mean they do some great work and their suspension is mostly designed for race cars that actually win, like their time attack S13. So I feel I should trust them. I hear they run on the stiff side so who knows. a 3.5k setup with their valving could feel like a 5k. Worst case scenario I swap to a slightly stuffer spring, but with how much driving I'll be doing in it between track, drag, and distance stuff like Modball Rally or Dustbowl Rally, they might work really well
Oh, and I vote for Drift Office. Great guys. Lo @ Intec has done some people dirty and I feel he cuts corners too often. |
04-30-2016, 11:14 AM | #139 |
Zilvia FREAK!
|
True, even 5K is soft, but as you said, you can swap them out. Just remember to revalve them to the spring rate you have. That's one of the reasons why I like BC racing coilovers, they offer a +/- 2 spring rate without having to valve.
I wonder what Curry did while he was here in WA?
__________________
|
05-01-2016, 09:53 AM | #140 | |
Zilvia Junkie
|
PNW role call
Quote:
I swear I heard Bob literally turns away s chassis now (like WYK said) and only works on newer cars like BRZs and Evos now? Lol they should rename the shop to Dyno Office since they don't even build drift cars anymore [emoji23]. As for Intec I think Randy Sissler(?) is their head tech now and I've heard he's a straight shooter. Ray @ Autohero doesn't even take people's phone calls and only does large projects now since he got sick of noob's showing up/calling about dumb stuff like boost leaks and essentially giving away free work since he's a nice guy. Ugh I wish there was a sure fire shop to take your car to here in the greater Seattle area without having to worried about questionable workmanship [emoji30]. And don't get me started on UP Garage [emoji27] |
|
05-01-2016, 10:23 AM | #141 |
Post Whore!
Join Date: Sep 2004
Location: Independence, Ore.
Age: 39
Posts: 2,715
Trader Rating: (24)
Feedback Score: 24 reviews
|
Yeah because NW 240s are almost universally epic shitpiles, or essentially fully done and not needing any shop work anyway. I totally appreciate Ray and Bob telling people to fuck off.
Honestly, if you need a shop to build a 240 you're sorta doing it wrong. The beauty of these cars is that you can build a pretty decent build in your garage for relatively cheap. |
05-01-2016, 11:45 PM | #143 |
Post Whore!
Join Date: Sep 2004
Location: Independence, Ore.
Age: 39
Posts: 2,715
Trader Rating: (24)
Feedback Score: 24 reviews
|
I've had a few friends up there do some stupid shit with the little 1-car-wide apartment garages.
Or make friends with someone who does. We've built at least half dozen cars in my garage. Host all sorts of shenanigans here. |
05-02-2016, 07:00 AM | #144 |
Zilvia Member
|
depends what you wanna build. I have good friends that work at Concrete Customs. they're newer, know their shit. no dyno yet. I don't know if Randy works at Intec, but I do know him and he does good work, I just don't trust Lo and his tuning. He's shitty with how he treats people too. I won't tune with him. I'm sure if you talked to Bob or Bill at drift office and had a serious car to tune they'd do it. They're nice guys. Or go talk to the dudes at PSI in Portland. Phenomenal dudes. Also there are shops now that you rent stall space and DIY with their tools.
BTW, DAMN YOU, I believe I've decided to do a single turbo 5.3L L33(aluminum LS style chevy motor) instead. UGH. But it'll actually save me probably 4k vs the LS3 and make way more power. LOL |
05-02-2016, 07:20 AM | #145 |
Zilvia FREAK!
|
When I lived on the East coast, finding other car friends was a breeze and hanging out and helping each other in as you said, what ever garage, was fun. But here in the NW, it seems as if everyone keeps to themselves and I'm the crazy one walking around talking to everyone.....lol
So at meets, all you meet are the young hoonigans with fucced up cars and older guys that say two words to every question you ask. So I don't know if it's just my personality clashing with the people from the PNW. McZface, all I have to say is YOUR WELCOME.....lol It's all about the boost life pimp....
__________________
|
05-02-2016, 07:52 AM | #146 |
Zilvia Member
|
Yeah seattle is nicknamed the frozen city or some shit because of people's cold personalities to other people. I totally get it. lol
and it actually won't be that bad of a build. short tube headers reversed on both sides, little custom exhaust work to a single ball bearing 76mm turbo, simple quality waste gate / bov setup, single exhaust all the way back with one cat and one muffler should keep it quiet and stealthy. black FMIC. mild cam, upgraded valve springs etc. stock everything else, 650whp all day on 92 plus the ability to tone it down to very low boost for shit weather. lol... and if I blow the L33 up, used ones are only like 700 bucks. try joining like northwest nissans, or some cars and coffee pages like seattle cars & coffee, simplynwimports, VQFamily, below_average, northwest import scene, northwestZcar, nw Nissan and infiniti, Washington car meets, pnw cars and trucks, pnw car lounge, caffeinated cars, speconesociety pnw, nw car meet, show and race, evergreen outkats, seattle area car show calendar, Nissanpacific group, northwest Nissan syndicate, nwn motorsports.. those are just some of the ones in my FB feed I see lol |
05-02-2016, 11:26 AM | #147 |
Zilvia FREAK!
|
Damn.. I didn't know that was Seattle's nick name. Sometimes even in the forums you can see it, others hardly post anything....lol
I'm not saying that they are not cool, but that barrier is thick...lol McZface, look at you now, making boost plans when not too long ago you were all 'N/A for LIFE!!!!' .... lol I HATE facebook, but it seems as if that is the only place to actually find out what's happening. My only hope is that it's not filled with hoonigan kids.
__________________
|
05-02-2016, 12:25 PM | #148 | |
Zilvia Addict
|
Quote:
In Bellingham, everyone was open to hang out or go down to the beer garden and have food and beers. Now that I'm in the Mill Creek area, idk who to hit up aside from the Shinchoku crew. I really don't like leaving a 5 mile radius of my house, traffic here sucks ass it's to the point where I just want a Ruckus and maybe a Yamaha 600 to get around West of i5... But I'd prefer car parts... Maybe people hate dealing with the shitshow traffic and would rather not drive to a buddies house? Seattle is literally 17 miles from where I live, getting there at night is a 20 minute drive but between 7am and 8pm it's fucked. Even going to Highway 99 during the day it's like a 30 minute drive in traffic (mind you 99 is probably 5 miles from my house but everything in between is stop and go). It's much worse down in Redmond, the east side... 405, Factoria? Eff that place, when I buy stuff off CL anywhere on the east side I have to meet people after 8pm because I don't want to sit in traffic for 3 hours...
__________________
@schassis.eddi |
|
05-02-2016, 01:04 PM | #150 |
Zilvia FREAK!
|
I live in Redmond, so I know all about the traffic. Yet, I still make the effort. I love driving. In fact I just made a new CD to blast while I'm in traffic so that the time would go by.
It must be a Caribbean thing where everything, no matter what, is just chill. If you're in a situation that you can't prevent or fix, say traffic, then calm down and enjoy your music or thoughts. It wouldn't help getting worked up about it. Also, I'm not saying meet up every day, but once or twice a month on a Saturday or even early sunday or something. Little to no traffic. IF everyone had that 5 miles from the house rule, then no one will see anything or any one. It must be me....
__________________
|
Bookmarks |
|
|