This is the interior thread - Page 58 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Wongger · 02-20-2011, 09:16 PM

Just realized I installed the shift boot wrong hahaha

ill. · 02-20-2011, 09:26 PM

Quote:

Originally Posted by nevertheless

Any source of getting that red bride fabric???

It was done when I got the car. I'll ask Adam next time I see him.

kyles1988 · 02-20-2011, 09:37 PM

Quote:

Originally Posted by nevertheless

Any source of getting that red bride fabric???

Haha everyone thinks bride fabric is super rare and made of pure uncut Colombian unicorn tears. in reality most bride dealers stock it. I suggest DriveLine Motoring - Your JDM Performance Specialists - Homepage

Irresistible · 02-20-2011, 10:22 PM

Quote:

Originally Posted by nevertheless

Any source of getting that red bride fabric???

Hit up Touge Factory on here. When I was there I saw that they had some Bride fabric laying around. Didn't see red, but I'm sure than can get you some.

Quote:

Originally Posted by kyles1988

Haha everyone thinks bride fabric is super rare and made of pure uncut Colombian unicorn tears. in reality most bride dealers stock it. I suggest DriveLine Motoring - Your JDM Performance Specialists - Homepage

Wait, it's not made of unicorn tears? Wtf..

MR.RMSCHIKO · 02-21-2011, 02:15 PM

here are some crappy pics of my interior
full HUD in my hatch and it works!

Drewber2006 · 02-21-2011, 03:40 PM

kinda boring but otherwise clean.. Sparco shift boot and shift knob haha

gearhead55 · 02-21-2011, 04:18 PM

Ok i need some input from all the interior gurus in here:

since swapping an RB25 into my s13 my speedo and HUD are showing about half of the speed that i am actually traveling at. how do i fix that?

chiboy002 · 02-21-2011, 05:10 PM

Quote:

Originally Posted by gearhead55

Ok i need some input from all the interior gurus in here:

since swapping an RB25 into my s13 my speedo and HUD are showing about half of the speed that i am actually traveling at. how do i fix that?

it has something to do with the s13 not working with other car speed sensors. If it's the same issue, when someone swaps s14 stuff with s13 speedo itll show 2x the speed and such.

240sx Speedometer error: S14 with S13 speed sensor reads double - Nissan 240SX Forums

gearhead55 · 02-21-2011, 06:28 PM

Quote:

Originally Posted by chiboy002

it has something to do with the s13 not working with other car speed sensors. If it's the same issue, when someone swaps s14 stuff with s13 speedo itll show 2x the speed and such.

240sx Speedometer error: S14 with S13 speed sensor reads double - Nissan 240SX Forums

Tight. i knew someone on here would know. Thanks Chiboy. too bad it looks like a complicated fix...

Levan. B · 02-21-2011, 06:56 PM

Z28ricer · 02-21-2011, 11:34 PM

2fast4y0u · 02-22-2011, 07:38 AM

Quote:

Originally Posted by Levan. B

what the hell is on your passenger floor board?

XxCAPTAINxX · 02-22-2011, 05:06 PM

its there. it looks like piece of clothing or something like that

ZX88 · 02-22-2011, 05:23 PM

so i just obtained a bride zeta II and i want it to sit low. Im 6'2" and currently i have to pop my sunroof when im wearing a helmet. Whats the lowest rail i should by bride fg? i already saw a thread that was comparing the FG with a some other low. Anyone have any experience with the buddy club sidmount rails?

TheRealSy90 · 02-22-2011, 05:28 PM

I've always heard Nagisa Auto rails are the lowest option.

Drewber2006 · 02-22-2011, 06:31 PM

Get a buddy club seat haha the rails and sliders sit low in mine

Levan. B · 02-22-2011, 06:32 PM

Quote:

Originally Posted by 2fast4y0u

what the hell is on your passenger floor board?

hahaha, its a sweater with a wolf on it. a girl that was with me brought it.

Thug Life · 02-22-2011, 06:40 PM

Brett have you done any thing to your ka yet haha?

Chaw wee · 02-22-2011, 06:44 PM

Quote:

Originally Posted by ILoveMyRHS13

Took a couple more shots of mine in nicer weather.

Damn, i really like yours, super clean, and yet simple.

Levan. B · 02-22-2011, 06:55 PM

Quote:

Originally Posted by Thug Life

Brett have you done any thing to your ka yet haha?

I'm Still waiting for it to come back from the machine shop lol.

Irresistible · 02-22-2011, 07:12 PM

Quote:

Originally Posted by ZX88

so i just obtained a bride zeta II and i want it to sit low. Im 6'2" and currently i have to pop my sunroof when im wearing a helmet. Whats the lowest rail i should by bride fg? i already saw a thread that was comparing the FG with a some other low. Anyone have any experience with the buddy club sidmount rails?

Fuck Buddy Club rails. Get Bride FG or Nams/Nagisa. Bride FG is dual lock I believe and the Nams one is single lock, if I remember correctly.

DFWZenki · 02-22-2011, 07:23 PM

Quote:

Originally Posted by c72c

2 clicks are all you need.

I thought i remembered someone on here makes these custom gauge bezels for the center dash trim pictured here. Anybody know who makes these?
I think they look great.

2fast4y0u · 02-22-2011, 07:49 PM

broadfield?

nothix · 02-22-2011, 08:29 PM

Kinda hard to see but I'm using the standard flat vent gauge plate with the autogauge angle adapters. I haven't driven with this setup yet, but its definitely better then having them face straight out.

SaNTi · 02-22-2011, 08:48 PM

Recycled shots. Winter needs to GTFO!

Before PBM steez

blingbling · 02-22-2011, 08:54 PM

Quote:

Originally Posted by SaNTi

Recycled shots. Winter needs to GTFO!

Before PBM steez

I like the cup with the illest sticker wrapped around it haha.... what's it for

Irresistible · 02-22-2011, 08:55 PM

Quote:

Originally Posted by nothix

Kinda hard to see but I'm using the standard flat vent gauge plate with the autogauge angle adapters. I haven't driven with this setup yet, but its definitely better then having them face straight out.

That's for the S13, the guy above asked about a setup for the S14 I assume, because that's what the picture is of.

SaNTi · 02-22-2011, 08:58 PM

Quote:

Originally Posted by blingbling

I like the cup with the illest sticker wrapped around it haha.... what's it for

I put a cup in my cup holder so I can put cups in my cup for my cup holder to hold.

chiboy002 · 02-22-2011, 09:29 PM

Quote:

Originally Posted by ZX88

so i just obtained a bride zeta II and i want it to sit low. Im 6'2" and currently i have to pop my sunroof when im wearing a helmet. Whats the lowest rail i should by bride fg? i already saw a thread that was comparing the FG with a some other low. Anyone have any experience with the buddy club sidmount rails?

Nagisa Super Lows are the same height at Bride FGs. Only difference is bride fg is more tilted backwards and you have to lock both sides individually if you wanna adjust. Nagisa has a 'oem-style' rail with ball rollers instead of bearings (better) and thicker brackets. About the same price

mind if i ask you where you found your zeta2? I wish i had bought s0ap's

Quote:

Originally Posted by Drewber2006

Get a buddy club seat haha the rails and sliders sit low in mine

are you stupid? Buddy clubs would put his head through the sun roof

Quote:

Originally Posted by gearhead55

Tight. i knew someone on here would know. Thanks Chiboy. too bad it looks like a complicated fix...

For sure man, i was looking at doing this when my speedo got messed up from tire sizes. Then i got over it - way too much trial and error

ILoveMyRHS13 · 02-22-2011, 09:37 PM

Yeah, Buddy Club rails are retarded high. That's what I have, but I don't mind sitting up high, and I'm 6'1"

A buddy of mine had Bride rails (I forget which) with the exact same seat as me and his sat way lower. I have no experience with Nagisa.

02-21-2011, 06:56 PM	#1720
Levan. B Zilvia Junkie Join Date: Sep 2010 Location: FL fail Posts: 443 Trader Rating: (7) Feedback Score: 7 reviews	__________________ enjukuracing.com

02-22-2011, 05:06 PM	#1723
XxCAPTAINxX Zilvia Member Join Date: May 2010 Location: hillsboro Age: 37 Posts: 181 Trader Rating: (0) Feedback Score: 0 reviews	its there. it looks like piece of clothing or something like that __________________

02-22-2011, 08:29 PM	#1734
nothix Zilvia Member Join Date: Jan 2008 Location: Lafayette, LA Posts: 200 Trader Rating: (1) Feedback Score: 1 reviews	Kinda hard to see but I'm using the standard flat vent gauge plate with the autogauge angle adapters. I haven't driven with this setup yet, but its definitely better then having them face straight out. __________________ '89 Sil80, SR20DET, GT2871r .64

02-20-2011, 09:16 PM	#1711
Wongger Zilvia Member Join Date: Oct 2008 Location: ONT Canada Age: 34 Posts: 153 Trader Rating: (0) Feedback Score: 0 reviews	Just realized I installed the shift boot wrong hahaha

02-21-2011, 02:15 PM	#1715
MR.RMSCHIKO Leaky Injector Join Date: Feb 2010 Location: Nashville,TN Age: 32 Posts: 115 Trader Rating: (2) Feedback Score: 2 reviews	here are some crappy pics of my interior full HUD in my hatch and it works!

02-21-2011, 03:40 PM	#1716
Drewber2006 Zilvia Member Join Date: Nov 2010 Location: SoCal Posts: 281 Trader Rating: (1) Feedback Score: 1 reviews	kinda boring but otherwise clean.. Sparco shift boot and shift knob haha

02-21-2011, 04:18 PM	#1717
gearhead55 Zilvia FREAK! Join Date: Jun 2008 Location: VENICE, CA Posts: 1,363 Trader Rating: (4) Feedback Score: 4 reviews	Ok i need some input from all the interior gurus in here: since swapping an RB25 into my s13 my speedo and HUD are showing about half of the speed that i am actually traveling at. how do i fix that?

02-21-2011, 11:34 PM	#1721
Z28ricer Zilvia Member Join Date: Jun 2009 Location: Tampa, FL Age: 41 Posts: 231 Trader Rating: (2) Feedback Score: 2 reviews

02-22-2011, 05:23 PM	#1724
ZX88 Post Whore! Join Date: Oct 2005 Location: ATX Age: 35 Posts: 2,946 Trader Rating: (8) Feedback Score: 8 reviews	so i just obtained a bride zeta II and i want it to sit low. Im 6'2" and currently i have to pop my sunroof when im wearing a helmet. Whats the lowest rail i should by bride fg? i already saw a thread that was comparing the FG with a some other low. Anyone have any experience with the buddy club sidmount rails?

02-22-2011, 06:31 PM	#1726
Drewber2006 Zilvia Member Join Date: Nov 2010 Location: SoCal Posts: 281 Trader Rating: (1) Feedback Score: 1 reviews	Get a buddy club seat haha the rails and sliders sit low in mine

02-22-2011, 06:40 PM	#1728
Thug Life Leaky Injector Join Date: Dec 2009 Location: nova Posts: 137 Trader Rating: (2) Feedback Score: 2 reviews	Brett have you done any thing to your ka yet haha?

02-22-2011, 07:49 PM	#1733
2fast4y0u Zilvia FREAK! Join Date: Sep 2005 Location: 50 miles west of chicago Posts: 1,186 Trader Rating: (9) Feedback Score: 9 reviews	broadfield?

02-22-2011, 08:48 PM	#1735
SaNTi Zilvia Addict Join Date: Aug 2009 Location: Toronto Posts: 690 Trader Rating: (0) Feedback Score: 0 reviews	Recycled shots. Winter needs to GTFO! Before PBM steez