Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!* - Page 604 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Royal_T · 01-14-2012, 11:45 AM

I know you guys hate teasers but just had to post this up.. My new setup 19x13-20 with Do-Luck overs..

now these are my Marketing/show wheels for DPE, going to be running 18s for drifting..

And a throwback pic..

jeremyuhh · 01-14-2012, 11:16 PM

Quote:

Originally Posted by Nizzan4u2nv

Thats because an ss595 in 205 is like a 215 with most other tires.

really? im meant to say my rear right was raised for some reason. But when im away from my drive way, both rears look like this:

ayuaddict · 01-15-2012, 01:21 PM

1.5 inches lower would be glorious.

ehhhregartless · 01-15-2012, 09:24 PM

sorry no specs, not my car

jus2fast · 01-16-2012, 04:36 AM

SSR AGLE Premium 19x9
225/35R19

Front +22
Rear +19

TEIN Drift Spec.

Manila, Philippines

Uploaded with ImageShack.us

ILoveJDM · 01-16-2012, 06:59 AM

FD is really sweet, but it doesnt belong here.

Darren · 01-16-2012, 08:30 AM

Quote:

Originally Posted by ILoveJDM

FD is really sweet, but it doesnt belong here.

Fitment is not S chassis specific... not sure where this is coming from

apologize for lack of rules appeasement

EliteJDM · 01-16-2012, 08:38 AM

Quote:

Originally Posted by ILoveJDM

FD is really sweet, but it doesnt belong here.

hahahaha... so dumb

1gr8bar10der · 01-16-2012, 09:21 AM

Quote:

Originally Posted by jeremyuhh

really? im meant to say my rear right was raised for some reason. But when im away from my drive way, both rears look like this:

What are your alignment/wheels/tires specs?

JN1AS4 · 01-16-2012, 10:12 AM

I just bought a set MB Battles 17x9.5 +15 for my coupe. And I'm having a hard time deciding on what size tires I need to run. I was thinking 215/45 all the way around all 4 corners have a slight roll. I was thinking 45 series sidewall because I don't wanna SLAM it all the way to the ground. Because my Silvia K's Aero bumper cost to much...lol. Any help will be greatly appreciated.

zooopreme · 01-16-2012, 10:18 AM

Quote:

Originally Posted by JN1AS4

I just bought a set MB Battles 17x9.5 +15 for my coupe. And I'm having a hard time deciding on what size tires I need to run. I was thinking 215/45 all the way around all 4 corners have a slight roll. I was thinking 45 series sidewall because I don't wanna SLAM it all the way to the ground. Because my Silvia K's Aero bumper cost to much...lol. Any help will be greatly appreciated.

http://zilvia.net/f/chat/392494-whee...on-thread.html

JN1AS4 · 01-16-2012, 10:24 AM

Quote:

Originally Posted by zooopreme

http://zilvia.net/f/chat/392494-whee...on-thread.html

thank you!!! Being moved now!!!!

rhd_sw20 · 01-16-2012, 02:50 PM

18 x 9.5/10.5 -18 215/40 225/40

Royal_T · 01-16-2012, 03:40 PM

^^ that looks clean.. more pics

*kingkilburn* · 01-16-2012, 04:01 PM

The car looks nice but the fitment isn't exactly whore status.

encludemeout · 01-16-2012, 04:01 PM

Quote:

Originally Posted by EliteJDM

hahahaha... so dumb

Quote:

Originally Posted by Darren

Fitment is not S chassis specific... not sure where this is coming from

apologize for lack of rules appeasement

You're both wrong, that FD doesn't belong here because it needs to be three inches lower.

XxMetra_MassacrexX · 01-16-2012, 09:08 PM

Quote:

Originally Posted by korrespondent

acs is ftw! Black e36 is almost perfect.

1 of my favorite

OZ Racing Mito
front 9,5x18 ET21 mit 225/35-18 Dunlop SP8000
Rear 10,5x18 ET28 mit 265/30-18 Dunlop SP8000

-sigh-

So..., probably gonna be flamed for this, butat this point I don't care. I went here to look for S-Chasis or Z-Chasiscars that had pictures of their wheel fitments and tires with great specs so I could figure out what the heck to do with my car. I want 17x9.75 XXRs for the rear and 17x8.25s for the front. I would like for them to sit 235/40s, BUT I'm looking through here and I can't help but have my eyes burn from all the BMdubs I've been seeing.

I may be a dyslexic 18 year old chick going blind, but I know for damn sure that's no Nissan >.> I get it's the pint of showing what it looks like, but my 240 is pretty gorgeous to me and she's not european. SHE'S JDM. (: lol, besides that, I'mma keep looking if the BMW police will let me. >

Not saying I don't appreciate the car, 'cause I do, it's just annoying.

Also, even though I'm going to search so much more into this, has anyone successfully figured out how to get wheels and tires that're going to fit but may rub to not rub just by buying bigger tires or what have you? Past experiences would help me out.

Lukasss · 01-16-2012, 09:30 PM

Quote:

Originally Posted by Darren

Fitment is not S chassis specific... not sure where this is coming from

apologize for lack of rules appeasement

Yeah but the fitment thread IS fitment specific.
And that is why that car doesnt belong here....

Before spring settled
18x10.5 et 10 -4*

Copilot911 · 01-16-2012, 09:31 PM

^^ WTF fail is going on here, so many dumb newbies asking stupid questions in this thread

18x10 +26
225/40
-4° of camber

Dustxking · 01-16-2012, 09:57 PM

rhd_ I need to see more pics NOW.

XxMetra_MassacrexX · 01-16-2012, 10:40 PM

wth. >.<

808drft · 01-16-2012, 11:27 PM

17x9 -3 (+35 w/38mm spacer) 215/40 rolled slight pull -3.5 degress camber

Uploaded with ImageShack.us

FusionR240sx · 01-17-2012, 03:52 PM

Quote:

Originally Posted by XxMetra_MassacrexX

I may be a dyslexic 18 year old chick going blind. -------- it's just annoying.

you are blind.
and you def are annoying.
because you can't read a thread.

those wheels in those sizes you posted up front suck.

alexanderig · 01-17-2012, 04:07 PM

[QUOTE=XxMetra_MassacrexX;4462962.[/QUOTE]
i personally like to see something different then an s chasis every once in a while and as long as there cars belong in this thread (aggressive fitment) then i dont mind. this thread is too show case aggressive fitment. now that being said to help you with your own question look at my posts in this thread and there is a pic of what your requesting except its 17x9.75 all around

simmode1 · 01-17-2012, 06:59 PM

Quote:

Originally Posted by 808drft

17x9 -3 (+35 w/38mm spacer) 215/40 rolled slight pull -3.5 degress camber

http://img507.imageshack.us/img507/1900/38873510101003345619231.jpg

Uploaded with ImageShack.us

You know those wheels are available in 17x9+20 for 4 lug, right?

***FaLKoN240*** · 01-17-2012, 08:14 PM

Quote:

Originally Posted by simmode1

You know those wheels are available in 17x9+20 for 4 lug, right?

He wanted to be a part of the big ass spacer crew

initial_jc · 01-17-2012, 08:39 PM

I'm on
18x9.5 +22 235/40 front
18x10.5 +22. 265/35 rear

KW v3 coils(1 inch from the lowest)& spl rucas

Slight rubbing will roll this weekend and possibly drop back down to lowest if it doesn't rub

frsh4 · 01-17-2012, 08:53 PM

^^^^ I hope you came prepared with your flame suit today.

initial_jc · 01-17-2012, 09:24 PM

there is a little stretch

ILoveMyRHS13 · 01-17-2012, 09:28 PM

Oh, I'm sorry, I thought this thread was about wheel fitment, not "a little stretch."

01-14-2012, 11:45 AM	#18091
Royal_T Zilvia Addict Join Date: Feb 2009 Location: TX Age: 41 Posts: 813 Trader Rating: (1) Feedback Score: 1 reviews	I know you guys hate teasers but just had to post this up.. My new setup 19x13-20 with Do-Luck overs.. now these are my Marketing/show wheels for DPE, going to be running 18s for drifting.. And a throwback pic.. __________________ http://zilvia.net/advertise.html

01-15-2012, 09:24 PM	#18094
ehhhregartless Post Whore! Join Date: Jul 2009 Location: nepa Age: 41 Posts: 2,775 Trader Rating: (13) Feedback Score: 13 reviews	sorry no specs, not my car __________________ www.zeedakay.com IG: @zeedakay

01-16-2012, 04:36 AM	#18095
jus2fast Join Date: Aug 2011 Location: Manila / Hong Kong / Vancouver Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	SSR AGLE Premium 19x9 225/35R19 Front +22 Rear +19 TEIN Drift Spec. Manila, Philippines Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us

01-16-2012, 06:59 AM	#18096
ILoveJDM Nissanaholic! Join Date: Jul 2006 Location: SK Canada! Posts: 1,947 Trader Rating: (27) Feedback Score: 27 reviews	FD is really sweet, but it doesnt belong here. __________________ DODOlogic.ca

01-16-2012, 03:40 PM	#18104
Royal_T Zilvia Addict Join Date: Feb 2009 Location: TX Age: 41 Posts: 813 Trader Rating: (1) Feedback Score: 1 reviews	^^ that looks clean.. more pics __________________ http://zilvia.net/advertise.html

01-15-2012, 01:21 PM	#18093
ayuaddict Post Whore! Join Date: Jan 2006 Location: Socal Age: 35 Posts: 4,017 Trader Rating: (9) Feedback Score: 9 reviews	1.5 inches lower would be glorious.

01-16-2012, 10:12 AM	#18100
JN1AS4 Zilvia Member Join Date: Dec 2009 Location: GA Posts: 291 Trader Rating: (1) Feedback Score: 1 reviews	I just bought a set MB Battles 17x9.5 +15 for my coupe. And I'm having a hard time deciding on what size tires I need to run. I was thinking 215/45 all the way around all 4 corners have a slight roll. I was thinking 45 series sidewall because I don't wanna SLAM it all the way to the ground. Because my Silvia K's Aero bumper cost to much...lol. Any help will be greatly appreciated.

01-16-2012, 02:50 PM	#18103
rhd_sw20 Zilvia Member Join Date: May 2006 Location: calgary Posts: 210 Trader Rating: (0) Feedback Score: 0 reviews	18 x 9.5/10.5 -18 215/40 225/40

01-16-2012, 04:01 PM	#18105
kingkilburn Philosopher King Join Date: Aug 2006 Location: FresYes Posts: 3,042 Trader Rating: (0) Feedback Score: 0 reviews	The car looks nice but the fitment isn't exactly whore status. __________________ G O L D E N B E A R R E P U B L I C

01-16-2012, 09:31 PM	#18109
Copilot911 Leaky Injector Join Date: Dec 2009 Location: Victoria, BC Posts: 118 Trader Rating: (0) Feedback Score: 0 reviews	^^ WTF fail is going on here, so many dumb newbies asking stupid questions in this thread 18x10 +26 225/40 -4° of camber

01-16-2012, 09:57 PM	#18110
Dustxking Zilvia Addict Join Date: Nov 2007 Location: 360 Age: 35 Posts: 709 Trader Rating: (4) Feedback Score: 4 reviews	rhd_ I need to see more pics NOW.

01-16-2012, 10:40 PM	#18111
XxMetra_MassacrexX Join Date: Jan 2012 Location: Northern VA Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	D: wth. >.< __________________ Come here my boy... Pwisahn!

01-16-2012, 11:27 PM	#18112
808drft Leaky Injector Join Date: Jun 2007 Location: Hotville Phoeinx, Missing Hawaii :( Posts: 122 Trader Rating: (3) Feedback Score: 3 reviews	17x9 -3 (+35 w/38mm spacer) 215/40 rolled slight pull -3.5 degress camber Uploaded with ImageShack.us

01-17-2012, 04:07 PM	#18114
alexanderig Zilvia Addict Join Date: Feb 2010 Location: Miami Age: 33 Posts: 644 Trader Rating: (4) Feedback Score: 4 reviews	[QUOTE=XxMetra_MassacrexX;4462962.[/QUOTE] i personally like to see something different then an s chasis every once in a while and as long as there cars belong in this thread (aggressive fitment) then i dont mind. this thread is too show case aggressive fitment. now that being said to help you with your own question look at my posts in this thread and there is a pic of what your requesting except its 17x9.75 all around

01-17-2012, 08:39 PM	#18117
initial_jc Zilvia Junkie Join Date: Nov 2004 Location: Bakersfield Age: 36 Posts: 549 Trader Rating: (3) Feedback Score: 3 reviews	I'm on 18x9.5 +22 235/40 front 18x10.5 +22. 265/35 rear KW v3 coils(1 inch from the lowest)& spl rucas Slight rubbing will roll this weekend and possibly drop back down to lowest if it doesn't rub

01-17-2012, 08:53 PM	#18118
frsh4 Nissanaholic! Join Date: Jul 2009 Location: Long Beach Age: 33 Posts: 1,638 Trader Rating: (17) Feedback Score: 17 reviews	^^^^ I hope you came prepared with your flame suit today. __________________ http://thatistupid.tumblr.com/

01-17-2012, 09:24 PM	#18119
initial_jc Zilvia Junkie Join Date: Nov 2004 Location: Bakersfield Age: 36 Posts: 549 Trader Rating: (3) Feedback Score: 3 reviews	there is a little stretch