Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!* - Page 65 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

WISH ONE · 08-03-2008, 05:54 PM

Quote:

Originally Posted by A'PEXi

18x10 +9, 255/35

you have more pics of this and normal color

rightcoastimports · 08-03-2008, 06:14 PM

Quote:

Originally Posted by midnight zenki

The rears shouldn't need to much of a pull unless you run over a 245 in width, on my 18x10.5 +16 equips I didn't need much more than some heat and a hammer, no roller necessary and even then it was the toe-in that caused most of the rubbing.

ok so if i run a 245/40 what do you think i'll need to run for camber and toe out back?

joefresh · 08-03-2008, 07:35 PM

rightcoast:

depending on how low your car is you might need a spacer. i needed to run a 5mm spacer on my 10.5 +15 to clear the collars on the coilover. i would go for atleast a 10mm spacer or possibly borrow a 15mm just to check what kind of clearance you have. i ran a 10.5 +10 with a 245/40/18 on the rear of my s14. -2.5 camber and 0 toe. pics a few posts back. goodluck

rightcoastimports · 08-03-2008, 07:50 PM

anyone have a pic of a 245 on a 10.5..? curious on how stretched it looks.

heres 235's on 11 inch rims

2forty · 08-03-2008, 08:35 PM

gramlight 57s 17x9.5+12 18x9.5+12 225/40 in the rear

Jlee · 08-04-2008, 02:17 PM

18x9 -11 + 5mm spacer = -16 225/40/18
18x10 -10 255/40/18
camber.. negative lots overfenders gonna get mounted asap..

Jon

joefresh · 08-04-2008, 07:25 PM

Quote:

Originally Posted by rightcoastimports

anyone have a pic of a 245 on a 10.5..? curious on how stretched it looks.

heres 245/40 FK452 on 10.5

woooo more shitty pics! hope these help man.

-Joe

blu2fourty · 08-05-2008, 12:57 AM

front 18x9.5 +30 (w/ 20mm spacer) 235/40/18 rs2
rears 18x9.5 +30 (need spacers... ) 235/40/18 fm901

some rubage while turning over a bump but overall clears the fronts with minor cuting fender linear

ESmorz · 08-05-2008, 05:15 AM

The best fitment you can get in the game

:keke :

Z33dori · 08-05-2008, 09:19 AM

you have to save the pics then upload them...

Fail

vvtisupra · 08-05-2008, 01:30 PM

Quote:

Originally Posted by rightcoastimports

anyone have a pic of a 245 on a 10.5..? curious on how stretched it looks.

heres 235's on 11 inch rims

245/40/18 on 18X10.5

spoolandslide · 08-05-2008, 09:54 PM

(joke)

just roll with nothin, it keeps it supper low
hahaha

INeedNewTires · 08-05-2008, 11:11 PM

Quote:

Originally Posted by rightcoastimports

anyone have a pic of a 245 on a 10.5..? curious on how stretched it looks.

ask and you shal receive.... 245-40-19

A'PEXi · 08-06-2008, 02:44 AM

wish one -
18x9 +8 front

a rear pic

wolfgangstbd · 08-07-2008, 03:14 AM

Quote:

Originally Posted by A'PEXi

wish one -
18x9 +8 front

a rear pic

so hot seriously +1 for you

eds13 · 08-07-2008, 09:37 AM

18x9 +7 front, 18x10 +22 rear (still need spacer)
215/40 and, 235/40 unknown camber and toe

Leetheslacker · 08-09-2008, 05:48 AM

run of the mill 17x9 + 1inch spacer.
215/40, 225/45

iHeartTheTouge · 08-09-2008, 07:33 PM

the usual 17x10 +12 with 225/45 Feddy and X amount of camber.

Slip&Sliden 240 · 08-10-2008, 11:07 AM

ross.cottrill · 08-10-2008, 05:51 PM

yer not geetin off that easy post up more pics bra^^!!!

midnight zenki · 08-10-2008, 08:13 PM

Quote:

Originally Posted by rightcoastimports

ok so if i run a 245/40 what do you think i'll need to run for camber and toe out back?

Sorry for the late reply rightcoast, toe should be zeroed and camber; well I am on stock arms for now so whatever it is at the height you desire just pound away to clear the situatuion.

Slip&Sliden 240 · 08-11-2008, 05:46 PM

Quote:

Originally Posted by ross.cottrill

yer not geetin off that easy post up more pics bra^^!!!

Here is a couple more

there is some more in action and the low down

vaughn4-
worst wheel fitment in history! -rep

LMAO

ross.cottrill · 08-11-2008, 06:35 PM

beautiful thanx man!!!^^^

drifter808 · 08-11-2008, 08:28 PM

^^^wheel sizes....please.

Slip&Sliden 240 · 08-12-2008, 12:15 AM

I<3 HATERS

18x9.5 -22 215/35 18
18x11 -3 245/40 18

JVDSKYRINE · 08-12-2008, 09:35 AM

Quote:

Originally Posted by Slip&Sliden 240

I<3 HATERS

18x9.5 -22 215/35 18
18x11 -3 245/40 18

I am just wondering how you haven't sucked your front fender in? thats if your drifting this thing.

240driftin[Sil80] · 08-12-2008, 07:47 PM

Quote:

Originally Posted by Slip&Sliden 240

I<3 HATERS

18x9.5 -22 215/35 18
18x11 -3 245/40 18

+1 for i love haters and the camber!

Garage Sokudo · 08-12-2008, 11:50 PM

One of my boys S14. 18x9 +5 215/35/18, 18x10 +20 235/40/18

***FaLKoN240*** · 08-13-2008, 01:49 AM

Quote:

Originally Posted by Garage Sokudo

One of my boys S14. 18x9 +5 215/35/18, 18x10 +20 235/40/18

Can you or anyone else show me a 9.5 with a 215/35/18 on it? I've been contemplating that at my next set up... but to me it sounds a little nutty.

Matej · 08-13-2008, 05:42 AM

Quote:

Originally Posted by FaLKoN240

Can you or anyone else show me a 9.5 with a 215/35/18 on it? I've been contemplating that at my next set up... but to me it sounds a little nutty.

Posted this a while back.

08-03-2008, 07:50 PM	#1924
rightcoastimports Zilvia Addict Join Date: Jul 2006 Location: Boston Area Age: 39 Posts: 663 Trader Rating: (15) Feedback Score: 15 reviews	anyone have a pic of a 245 on a 10.5..? curious on how stretched it looks. heres 235's on 11 inch rims __________________ 95 SR Zenki \| @ e_form daily - A34 Maxima \| A36 Maxima

08-03-2008, 08:35 PM	#1925
2forty Nissanaholic! Join Date: Jan 2003 Location: sacramento, CA Posts: 1,659 Trader Rating: (15) Feedback Score: 15 reviews	gramlight 57s 17x9.5+12 18x9.5+12 225/40 in the rear __________________ TEAM SKIDMARKS Carbon black S13 SR Coupe

08-05-2008, 12:57 AM	#1928
blu2fourty Zilvia Member Join Date: Jul 2005 Location: toronto Posts: 203 Trader Rating: (2) Feedback Score: 2 reviews	front 18x9.5 +30 (w/ 20mm spacer) 235/40/18 rs2 rears 18x9.5 +30 (need spacers... ) 235/40/18 fm901 some rubage while turning over a bump but overall clears the fronts with minor cuting fender linear __________________ -94 green civic h/b(sold) -90 Blue 240sx f/b (sold) -90 Red Rx7 gxl (sold) -95 gold 240sx (sold) -95 white 240sx le (scrapped) -95 black 240sx le w/sr (parting out) -95 purple 240sx le

08-05-2008, 05:15 AM	#1929
ESmorz Post Whore! Join Date: Oct 2007 Location: It Looks Like A Dong Posts: 6,902 Trader Rating: (2) Feedback Score: 2 reviews	The best fitment you can get in the game :keke : __________________ Last edited by ESmorz; 08-05-2008 at 02:32 PM..

08-05-2008, 09:19 AM	#1930
Z33dori Post Whore! Join Date: Dec 2006 Location: Riverview, FL Age: 35 Posts: 5,557 Trader Rating: (12) Feedback Score: 12 reviews	you have to save the pics then upload them... Fail __________________

08-03-2008, 07:35 PM	#1923
joefresh Zilvia Junkie Join Date: May 2007 Location: socal Posts: 451 Trader Rating: (11) Feedback Score: 11 reviews	rightcoast: depending on how low your car is you might need a spacer. i needed to run a 5mm spacer on my 10.5 +15 to clear the collars on the coilover. i would go for atleast a 10mm spacer or possibly borrow a 15mm just to check what kind of clearance you have. i ran a 10.5 +10 with a 245/40/18 on the rear of my s14. -2.5 camber and 0 toe. pics a few posts back. goodluck

08-04-2008, 02:17 PM	#1926
Jlee Zilvia Member Join Date: Jun 2007 Location: Toronto Posts: 189 Trader Rating: (0) Feedback Score: 0 reviews	18x9 -11 + 5mm spacer = -16 225/40/18 18x10 -10 255/40/18 camber.. negative lots overfenders gonna get mounted asap.. Jon

08-05-2008, 09:54 PM	#1932
spoolandslide Zilvia FREAK! Join Date: Apr 2008 Location: lost in a bump splice in the fabric of our clockwork Posts: 1,044 Trader Rating: (12) Feedback Score: 12 reviews	(joke) just roll with nothin, it keeps it supper low hahaha

08-06-2008, 02:44 AM	#1934
A'PEXi Leaky Injector Join Date: Apr 2006 Location: Japan Posts: 76 Trader Rating: (0) Feedback Score: 0 reviews	wish one - 18x9 +8 front a rear pic

08-07-2008, 09:37 AM	#1936
eds13 Zilvia FREAK! Join Date: Jun 2006 Location: teh VA dawg Posts: 1,285 Trader Rating: (1) Feedback Score: 1 reviews	18x9 +7 front, 18x10 +22 rear (still need spacer) 215/40 and, 235/40 unknown camber and toe __________________

08-09-2008, 05:48 AM	#1937
Leetheslacker Zilvia Junkie Join Date: Jul 2005 Location: ohio Posts: 382 Trader Rating: (1) Feedback Score: 1 reviews	run of the mill 17x9 + 1inch spacer. 215/40, 225/45

08-09-2008, 07:33 PM	#1938
iHeartTheTouge Zilvia Addict Join Date: Aug 2006 Location: Glen Allen, VA Age: 35 Posts: 602 Trader Rating: (6) Feedback Score: 6 reviews	the usual 17x10 +12 with 225/45 Feddy and X amount of camber. __________________ Slide 'n Hide -'72 240z LS1 project

08-10-2008, 11:07 AM	#1939
Slip&Sliden 240 Zilvia Member Join Date: May 2004 Location: Washington Age: 37 Posts: 237 Trader Rating: (1) Feedback Score: 1 reviews

08-10-2008, 05:51 PM	#1940
ross.cottrill Zilvia FREAK! Join Date: Sep 2005 Location: orlando,fl Posts: 1,185 Trader Rating: (12) Feedback Score: 12 reviews	yer not geetin off that easy post up more pics bra^^!!! __________________ " NEO VVL BABY FTMFW!" Originally Posted by shagspeed Dude if I made 500WHP on a 54C SR20DET back in 1999-2000 with old school technology .. This VET will T-BAG your RB engines

08-11-2008, 06:35 PM	#1943
ross.cottrill Zilvia FREAK! Join Date: Sep 2005 Location: orlando,fl Posts: 1,185 Trader Rating: (12) Feedback Score: 12 reviews	beautiful thanx man!!!^^^ __________________ " NEO VVL BABY FTMFW!" Originally Posted by shagspeed Dude if I made 500WHP on a 54C SR20DET back in 1999-2000 with old school technology .. This VET will T-BAG your RB engines

08-11-2008, 08:28 PM	#1944
drifter808 Zilvia Addict Join Date: Aug 2005 Location: Big Island Age: 35 Posts: 829 Trader Rating: (4) Rides Gallery: drifter808 Feedback Score: 4 reviews	^^^wheel sizes....please. __________________

08-12-2008, 12:15 AM	#1945
Slip&Sliden 240 Zilvia Member Join Date: May 2004 Location: Washington Age: 37 Posts: 237 Trader Rating: (1) Feedback Score: 1 reviews	I<3 HATERS 18x9.5 -22 215/35 18 18x11 -3 245/40 18

08-12-2008, 11:50 PM	#1948
Garage Sokudo Leaky Injector Join Date: Nov 2007 Location: Melbourne, Australia Age: 36 Posts: 56 Trader Rating: (0) Feedback Score: 0 reviews	One of my boys S14. 18x9 +5 215/35/18, 18x10 +20 235/40/18 __________________ Garagesokudo.com.au - JDM tyt wheels. Sokudostyle.com - Sokudo Lifestylin'