Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!*

[1jzjoey]

wtf happened to no specs no post

[SleeKS13]

18x12-22 SSR

[Breitling]

RX7's breathing life into page 663! Very cool, loving post #19865!


Track Car Only. Fitment is conservative based on suspension travel. we cut about 3 inches out of the stock fender wells. Then, re welded the fenders and pounded the inside upwards

Again, its conservative at the start .... but the new coilovers haven't settled yet. 2 miles on them (Stance SS+).

18x11.5 +04

[Flushladyz]

[ziptie]

18 x 10 - 23
235/40/18
240z bolt on flares by topstage

[ziptie]

Side shot with the skidders on
ssr professors 18 x 11 - 7
245/40/18


The only recent one I have atm my car is looking pretty haggard (it was at a track day) I've torn down the front end and have a new aero bar on its way from Japan. I've bent something as the fronts were pretty flush before, so Im going to work that one out too.

[Breitling]

Originally Posted by MidnightKouki

Hey these are the exact same specs as my wheels ('cept 19's out back) and I've been thinking about these overs. Is that the fitment with no spacers? Much camber? more pics?

Thanks!

No spacers and about 1.25 degrees of camber (minimal). tires are 265.35. I was worried that 50MM would be too small considering that the 20MM BMagics left the wheels in a "poke" state.

Here they are with 30mm BMagic (car is on the ground).
http://sphotos-a.xx.fbcdn.net/hphoto...28453660_n.jpg


Here they are with the Origin 2's
http://sphotos-b.xx.fbcdn.net/hphoto...49284508_n.jpg


http://sphotos-b.xx.fbcdn.net/hphoto...15488510_n.jpg

http://sphotos-b.xx.fbcdn.net/hphoto...69971809_n.jpg

[MidnightKouki]

^^^I think my mind is made up. thanks for the pics


current state.
18x10.5 -21
19x11.5 +4

[goon bag]

17x9+22 + 25mm spacer (effectively -3)F
17x10+8R
215 40 17 all round
panasport G7C5C

[JonathanPrem]

^OMG you are embrassing Canadians with that shit. I will try to recover his post

18x9.5 -6 running 20mm spacer to clear brembo -26 efftive
18x10.5 -6 et

[Laotian240]

18x10
18x12.5


Just finished building my rims haven't measured the offset yet I'll get to that later. Just a few test fits need to adjust camber and ride height. Dunno if I should paint the car beige or keep it a red.

[Redstar]

18x10.5 +26mm
235/40/18 Falken FK452

[tougefactory]

Weds Maverick 210S, 20x9.5+24, 20x10, +24,

[DeleriousZ]

Originally Posted by WakeBHR

I cant believe people are still making "just gotta do this and this and this" posts.
If it aint done. Dont post it. Simple shit people.

This. Gotta start handing out points or something for weak fucking posts. If it's not flush, don't post it!!

Repost for rules:



18x10.5+0 245/40
18x9.5-13 225/40

[harangatang]

No mas kouki, but I'll post what I've had for a few months now =P

On the way to Wekfest a few weeks back.. These are Work Gnosis GS2, 19x9.5-3 19x10.5-8


on the way back




Just got these on a week ago! Center caps weren't in yet
19x10-2 19x12-6 Riverside Trafficstars
Roll on the fronts only, like a 10-15mm pull on the rears.

[gearhead55]

Originally Posted by goon bag

17x9+22 + 25mm spacer (effectively -3)F
17x10+8R
215 40 17 all round
panasport G7C5C

this looks awesome. give us some side shots!

[goon bag]

cheers man,
this is about the only one I have at that height lol


sorta side on

[nismobenzo]

Originally Posted by Javier13

drift car

the basic idea you are going for is soo fucking full of win!!!

oh..rulez

20×10 -3f 20×12 -10r

[tayloray]

My old coupe,
17x9 et-24 245-35
17x10 et-22 285-35





Porsche 951 days.

16x8
16x10
215's all the way around

[S13Missle]

Older
18x9.5/10.5 +20'ish (cant remember)

[hypercrush]

almost got these things tucking. so close


(18x10 +6 & 18x12 -14)

[terrence]

I don't know bout' them mirrors man.

edit: oops, this is wheel fitment thread;





18x10 +18; 225/40 17x9.5 -8, 215/40

[Papi Sucio]

I still don't understand, why have an offset? Do they increase performance in any way? I'm just asking cuz I need help in deciding what to get for my s13 coupe. I know that I want varrstoen v1 or similar but I'm unsure what size to get, offsets, how much I would have to stretch the fenders, spacers, and f I should switch to 5 lug or if I'm ok with what I currently have. Please help, my baby needs new shoes!

[Pasini]

my old rig. 25mm/50mm widebody.

Kreis in 18x10 -3 front / 18x11.5 -23 rear

(sorry about big picture)

[Te37]

Originally Posted by Papi Sucio

I still don't understand, why have an offset? Do they increase performance in any way? I'm just asking cuz I need help in deciding what to get for my s13 coupe. I know that I want varrstoen v1 or similar but I'm unsure what size to get, offsets, how much I would have to stretch the fenders, spacers, and f I should switch to 5 lug or if I'm ok with what I currently have. Please help, my baby needs new shoes!

Your baby needs a new owner.

[Breitling]

Originally Posted by Te37

Your baby needs a new owner.

Answers like that are what helped zilvia develop the reputation that it currently has.

[Breitling]

Originally Posted by Papi Sucio

I still don't understand, why have an offset? Do they increase performance in any way? I'm just asking cuz I need help in deciding what to get for my s13 coupe. I know that I want varrstoen v1 or similar but I'm unsure what size to get, offsets, how much I would have to stretch the fenders, spacers, and f I should switch to 5 lug or if I'm ok with what I currently have. Please help, my baby needs new shoes!

You may want to post your question in the fitment question thread. This thread is for pics of finished fitment. I believe the thread you are looking for may be helpful. Also, you might want to re-ask your questions with more clarity so that people know what you are asking specifically.

[FEED]

Originally Posted by Breitling

Answers like that are what helped zilvia develop the reputation that it currently has.

People need to stop asking dumb questions and search for them, all the guys doing legit shit in here did their homework and put effort into it. Sure the guy might be new here, even new in the whole fitment thing... but unless he's blind, which I doubt since he's posting on here, he can sit down and scroll the pages, all the answers are there to be found.

Also, he wants replica, yet his username is TE37

[Z33dori]

Originally Posted by Breitling

Answers like that are what helped zilvia develop the reputation that it currently has.

he has a point, if the lazy kid would just look there answers are blasted through out the thread over and over and over

and rimtuck.com link has been posted over and over and over

Originally Posted by FEED

People need to stop asking dumb questions and search for them, all the guys doing legit shit in here did their homework and put effort into it. Sure the guy might be new here, even new in the whole fitment thing... but unless he's blind, which I doubt since he's posting on here, he can sit down and scroll the pages, all the answers are there to be found.

Also, he wants replica, yet his username is TE37

TE was responding not asking

[xoxide]

Originally Posted by FEED

Also, he wants replica, yet his username is TE37

Canaduhhh yet another fail.

Papi Sucio asked, not TE37.