Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!*

[evil240sx]

Ssr gartmaier 18x10-12 18x11-13

[terrence]

Just here for page 666;

18x10 +18, 225/40
17x9.5 - 13, 215/40

[mostdopes13]

in for page 666
waited until i got my full adjustable rear parts to post pics. didn't think these wheels would look good at all on it but i actually like it a lot
specs
cobra r's
17x10.5 rear +19 225/45/17
17x9 front +19 205/40/17
5mm slips all around

[oXeNo]

Just got this fitted the yesteday, my new Varrstoens.

Specs:
F17x9 +12 with Federal 595 Evo 205/40/17
R17x9.5 +12 with 215/45/17 Dunlop Direzza

Fenders just have a roll, used a rubber mallet and heat gun, took about 45mins in total, stock camber arms in the rear, front has adjustable top hats.







I wish my front coils went a tad bit lower, but this is as good as it gets for me till I get new coils. Probably going with PBM, also this is without any spacers. +12 offset clears perfect.

[punxva]

^ This guy's name says it all

18x9 +12 18x10+18 O-disk

[Touge_Monster]

Also here for the page. 17x9 +5 215/40 front 215/45 rear. Lots of camber.

[sideways_s13!]

17x9.75 F:205/45 +5 R:215/40 +0

[FEED]

Don't think I posted these on here...
18x10 0 | 225/35
18x13 x | 295/30

[jaysgottaredtop]

^ i don't think i've seen any x10.5s up front on an s13 under stock metal. overs and flares, yes. for reference...

my hatch on those cobra reps, 245/40/17 Bridgestone RE01-R front, 255/40/17 Federal 595-SS rear:


in sum: get flares/overs and fit whatever the hell you want.

p.s. sorry in advance for inevitably making someone mad about whether that qualifies for this thread, haha

[fliprayzin240sx]

Originally Posted by JOHN CALVARIO

Oh ok. So if i end up putting 20mm spacers the rim will stixk out more right?

Yes itll stick out but you'd need spacers either way since there is no Cobra rep wheel that is 10-10.5j that will fit a S-chassis front with no spacers. All of them will rub your coilovers. Then you can also kiss your full turn lock to lock.

Lastly, this is NOT the place to ask for wheel fitment question...

Rules:

18x10 +22 (with 20mm spacers) 225/40-18 Fronts and 18x10.5 +10 235/40-18 Rears.

[jaysgottaredtop]

Originally Posted by OgSilviaSkywalker

so hows your turning radius with the 10.5s up front?

good enough to do this once a month.


http://www.youtube.com/watch?v=YFmGxvQXuQY

^ specs for clarity:
f: 17x10.5 -5 (+20 wheel, 25mm spacer), 255/40/17 Feddy 595-SS
r: 17x9 +0 Hot Wheels w/ crappy spares.

front wheel wells have been bashed up/out with a sledge hammer on multiple occasions. drivers side harness is pulled up/back as far as it can possibly go away from the tire, yet it still gets nicked by the tire at every event. i finally gave in a few weeks ago and completely cut out the front sides of my wheel wells. i still rub my inner wheel lip on the brake line brackets and the entire back side of the wheel wells, but just barely. i also rub my flares at/near lock over bumps, but that's to be expected.

[95KA-Turbo]

In for 666







17X10 -18 235/40
17X11 +0 245/40

[bombatape]

Originally Posted by s13_maJiK

Any more pics of this? And or what are the wheels? Looks super rad

PM'd ya bro
RULES:
18x11 -25

[c4lvin]

235/40 ^







Sold my 235/40/18s and got some 255/35/18s on. Picture above is with 235/40 and 215/40

18x10 +/-0
18x11 +7

Fronts will be 235/35 next and Chargespeed rear overs and less camber.

[Drock30]

Benzo,Batman, Big Hoe, Lap Dance
Ass so fat need a lap dance

(Put your finger where the exhaust would go to stop the illusion of more camber on the right.)

14x11

[Daviticus]

You've got two posts on this site, both in this thread (which is the wrong one for you to be posting questions in).

Put your helmet back on, grab your coloring book, and get back to learning.

You need to be asking over here:

http://zilvia.net/f/chat/392494-whee...on-thread.html

Rules:

[energ]

18x9.5 -10/18x10.5 -26
FOR SALE check my thread in for sale section

[DeleriousZ]

18x10.5 et0
245/40 feddy 595
unknown camber

[Mastermind]

(front) XXR 526 17x9 +35mm offset with 1" spacer Tire 215/40/17
(rear) XXR 526 17x10 +20mm offset 1/4" spacer Tire 235/40/17

[ComicArtist]

^ saw you at CCM:13. Somebody snapped this at the same meet. Specs: 15x10, -25 front and -38 rear. 205/50 Falkens



I test fitted this on my FC yesterday too: 19x10 +13. Unfortunately I only have one, so I need another to make a set.



Couldn't let the suspension down because it poked outside the fender it would tuck about an inch of rim if I had been able to.

[240dream]

18x10 +12 225 40 all around

need some kouki sides/frotn bumper and to lower the front

[510erv]

F 18x9.5 +15 225/40 R 18x10.5 +15 235/40

[thisisastickup]

also here for page 666.



18x9.5 -12 effective, 19x10.5 -8. 50mm rears, stock metal fronts.

[kiriyama]

In for Page 666.


Rear 18x12 265/40/18 Front 18x10.5 235/35/18

[510erv]

F 18×9.5+15 R 18x10.5+15

[cmg]

17x9 -20 215/40/17
17x10.5 -12 235/40/17



Disregard the ogre.

[240sxdriftin]

just playing around with stuff, should have messed with my suspension and tucked the rear but it was cold. not my wheels just testing for new wheels

rear 19x11 -20 front 18x9 -37

[trickey1991]

in for 666,

18x9.5+15 all around 225/40/18

[wanabedrftr]

17x9.5 et0/-14 215/45 all around camber was alot like -7 all around. i got sick of it fast


Untitled by THE DUBY, on Flickr


Untitled by THE DUBY, on Flickr


its back on the tarmacs. waiting to finish my swap and then paint it again

18x9.5 et10/-15 245/40 and 275/35.. but going lower with 235 fronts and the 245's in the rear soon once it runs


Untitled by THE DUBY, on Flickr


Untitled by THE DUBY, on Flickr

[jasoncanseeoh]

18x9.5 +15
Battles 4 LYFE