Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!* - Page 672 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

***FaLKoN240*** · 06-18-2013, 02:23 PM

18x9 -5 18x10 +20 225/40/18 Nankang NS2 all around.

For sale too... http://zilvia.net/f/wheels-tires/523...8x10-20-a.html

Doonagoowin · 06-18-2013, 03:29 PM

Sup guys! First picture post here. I've been around the Marketplace lol.

Anyways, here was my last car, 2009 WRX sedan.

https://fbcdn-sphotos-e-a.akamaihd.n...83271164_n.jpg

18x9.5 +30 225/35 all the way around.
-3ish degrees camber front
-5.5ish degrees camber rear

It's been parted out and getting sold, here's what I'm working on now.

The car's getting the body work done at the moment, then I'm gonna be looking for 18 inch rears, and new rear toe rods. I need the bent ones like PBM or SPL.
These wheels are 17x8.5 +35/17x9.5 +22 wrapped in 245/40 and 245/45. Those are going to need to be adjusted soon after I get the kit on.

JonathanPrem · 06-18-2013, 07:50 PM

18x9.5 -14(20mm for BBK) -34ET
18x11 -47
245/35,215/35

ILoveJDM · 06-21-2013, 02:57 AM

18x9.5-10 fr

Beemer · 06-21-2013, 10:11 AM

18x9.5 +10 offset wrapped with a 225/40

Beemer · 06-21-2013, 09:42 PM

yup there battles. Front are the same spec and tires.

240drifter1 · 06-24-2013, 09:01 AM

16x9 +15 on the daily

Needs wide mount GT wing. Ultimate drift spec will be achieved.

jsu1012 · 06-25-2013, 07:22 AM

sorry for the terrible terrible iphone pic. better pics coming soon

F - 18X9, +15
R - 18X10.5, 12

Rolled and pulled quaters.

punxva · 06-29-2013, 02:56 PM

Just test fitted the wheels with overs running 50mm origin type 2 rears are 18x11 +6 265/35, need to lower it more and pull some camber out once its down to tuck rim, don't mind the front still need to push them out more and modify the fenders once they are pushed out. Right now it is about a credit card away from touching in the rear, still not happy with how it is sitting, but once i bring it down in the back it should be better.

dazed · 06-29-2013, 07:39 PM

Fitting friends front wheels for fun.

18's.

9.5j -22

30mm fenders, ~ -4.8*ish?

PoorMans180SX · 06-30-2013, 10:20 PM

18x8.75+20 215/35/18 probably -7 degrees of camber. 40mm overfender, 50mm extended arms, relocated strut upper mount.

NotLowEnough · 07-03-2013, 06:45 AM

16x10 - 0 rolled with a slight pull. Unknown camber front and rear.

bosoS14russ · 07-06-2013, 02:35 AM

F - 18x10.5 +20 (40mm spacer) ET.-20
R - 18x9.75 +20 (40mm spacer) ET.-20
225/35R18 Nanking NS2 all around

Unknown camber F/R??????????????

Beemer · 07-06-2013, 03:19 PM

Nice fitment what tire sizes are you running up front???^^^^^^

headup240 · 07-06-2013, 07:39 PM

17x10 +11 215/45/17 Federal 595 Front (20mm Dmax Fenders)
17x11 +11 225/45/17 Federal 595 Rear (Stock body roll and pull)

bosoS14russ · 07-06-2013, 09:57 PM

Quote:

Originally Posted by Beemer

Nice fitment what tire sizes are you running up front???^^^^^^

Mybad I forget to post tire size its 225/35R18 Nanking NS2 all around

Charlie_91 · 07-10-2013, 01:26 AM

Specs:
Front - 17 x 9 -2 with 215/40
Camber: around -7* toe: ??

Rear - 17 x 10+12 with 215/45
Camber: around -2 toe: ??

Guard work:
Front: Rolled flat
Rear: Rolled flat with magazine pull.

WristWork · 07-10-2013, 02:36 AM

GTR Grill, Bricks, Paint
and thats my favorite stock body silvia

Nice!

Charlie_91 · 07-10-2013, 02:39 AM

Front bar will be painted soon. bricks will make there way on there eventually.. would rather slide. but no grill for me

i really like them without.. thanks anyways

350DAN · 07-10-2013, 10:47 AM

Sold my Z, wheels are for sale

DPE RFK
19x11-6
19x12-14

turbo2nr · 07-10-2013, 11:06 AM

18x9.5-1 235/40
18x11.5+11 265/35

stock metal fenders w/ pull

needs a little more fender work and camber toe adjust and it'll be perfect

MarcD · 07-14-2013, 04:25 PM

18x9.5 +20
225.40.18
F&R.

Anyone want to swap center caps, looking for black ones instead.

driftsucky · 07-15-2013, 08:49 PM

18x9.5 12 225/40
18x12 -2 275/35

i'M WAiting for non shitty pics. Sooo, in the meantime...

1 is processed

Thedriftbadger · 07-19-2013, 11:54 PM

Can anyone id these? Sorry for the shitty pic, it's the only one i have

hai_tech · 07-20-2013, 12:32 AM

mpapers22 · 07-20-2013, 11:54 AM

18x9 +8 215/40
18x10 +13 225/40

stephens14sr · 07-20-2013, 11:59 AM

Quote:

Originally Posted by mpapers22

18x9 +8 215/40
18x10 +13 225/40

no...........

AKsamuraiS14 · 07-20-2013, 03:38 PM

Quote:

Originally Posted by Thedriftbadger

Can anyone id these? Sorry for the shitty pic, it's the only one i have

You should of put this in the identify thread but those are my old wheels. Came from Japan, only set in america at the time and these were discontinued. They were made by enkei wheels but didn't know the model so I just called them enkei hurricanes but I wish the sizing was better too. It was good for back in the day 17x8 +22 if I remember correctly

Thedriftbadger · 07-20-2013, 03:59 PM

Quote:

Originally Posted by AKsamuraiS14

You should of put this in the identify thread but those are my old wheels. Came from Japan, only set in america at the time and these were discontinued. They were made by enkei wheels but didn't know the model so I just called them enkei hurricanes but I wish the sizing was better too. It was good for back in the day 17x8 +22 if I remember correctly

Cool thanks. I saw them in a picture of facebook a while back and searched like a mofo to find it again lol. They were on a white s13. The guy who owned it had a purple rx7 before it. That wouldn't happen to be you?

AKsamuraiS14 · 07-20-2013, 06:54 PM

Quote:

Originally Posted by Thedriftbadger

Cool thanks. I saw them in a picture of facebook a while back and searched like a mofo to find it again lol. They were on a white s13. The guy who owned it had a purple rx7 before it. That wouldn't happen to be you?

Yah, the white s13 was my buddy eddies but before that it was owned by my good friend Phil on a mint green s13, and before that i owned them on my s14 and I had got them on eBay from Japan originally back in 2006

Here are some pics I found

06-18-2013, 07:50 PM	#20133
JonathanPrem Zilvia Addict Join Date: Sep 2010 Location: Toronto Ontario Posts: 729 Trader Rating: (9) Feedback Score: 9 reviews	18x9.5 -14(20mm for BBK) -34ET 18x11 -47 245/35,215/35 __________________ IG-jonathanprem

06-21-2013, 02:57 AM	#20134
ILoveJDM Nissanaholic! Join Date: Jul 2006 Location: SK Canada! Posts: 1,947 Trader Rating: (27) Feedback Score: 27 reviews	18x9.5-10 fr __________________ DODOlogic.ca

06-25-2013, 07:22 AM	#20138
jsu1012 Zilvia FREAK! Join Date: May 2011 Location: Oklahoma Age: 38 Posts: 1,116 Trader Rating: (13) Feedback Score: 13 reviews	sorry for the terrible terrible iphone pic. better pics coming soon F - 18X9, +15 R - 18X10.5, 12 Rolled and pulled quaters. __________________ @streetstyle_jay Last edited by jsu1012; 07-02-2013 at 08:08 AM..

06-30-2013, 10:20 PM	#20141
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 36 Posts: 5,574 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	18x8.75+20 215/35/18 probably -7 degrees of camber. 40mm overfender, 50mm extended arms, relocated strut upper mount. __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

07-06-2013, 02:35 AM	#20143
bosoS14russ Leaky Injector Join Date: Apr 2012 Location: Mira Loma,CA Age: 33 Posts: 63 Trader Rating: (0) Feedback Score: 0 reviews	F - 18x10.5 +20 (40mm spacer) ET.-20 R - 18x9.75 +20 (40mm spacer) ET.-20 225/35R18 Nanking NS2 all around Unknown camber F/R?????????????? Last edited by bosoS14russ; 07-07-2013 at 12:09 AM..

06-18-2013, 02:23 PM	#20131
*FaLKoN240* Super Moderator Join Date: Jun 2004 Location: SoCal Temecula Posts: 16,885 Trader Rating: (73) Feedback Score: 73 reviews	18x9 -5 18x10 +20 225/40/18 Nankang NS2 all around. For sale too... http://zilvia.net/f/wheels-tires/523...8x10-20-a.html

06-18-2013, 03:29 PM	#20132
Doonagoowin Join Date: Apr 2012 Location: Utah Age: 31 Posts: 35 Trader Rating: (3) Feedback Score: 3 reviews	Sup guys! First picture post here. I've been around the Marketplace lol. Anyways, here was my last car, 2009 WRX sedan. https://fbcdn-sphotos-e-a.akamaihd.n...83271164_n.jpg 18x9.5 +30 225/35 all the way around. -3ish degrees camber front -5.5ish degrees camber rear It's been parted out and getting sold, here's what I'm working on now. The car's getting the body work done at the moment, then I'm gonna be looking for 18 inch rears, and new rear toe rods. I need the bent ones like PBM or SPL. These wheels are 17x8.5 +35/17x9.5 +22 wrapped in 245/40 and 245/45. Those are going to need to be adjusted soon after I get the kit on.

06-21-2013, 10:11 AM	#20135
Beemer Leaky Injector Join Date: Sep 2007 Location: regina,sask Age: 35 Posts: 94 Trader Rating: (0) Feedback Score: 0 reviews	18x9.5 +10 offset wrapped with a 225/40

06-21-2013, 09:42 PM	#20136
Beemer Leaky Injector Join Date: Sep 2007 Location: regina,sask Age: 35 Posts: 94 Trader Rating: (0) Feedback Score: 0 reviews	yup there battles. Front are the same spec and tires.

06-24-2013, 09:01 AM	#20137
240drifter1 Zilvia FREAK! Join Date: Mar 2007 Location: Knoxville, TN Posts: 1,505 Trader Rating: (1) Feedback Score: 1 reviews	16x9 +15 on the daily Needs wide mount GT wing. Ultimate drift spec will be achieved.

06-29-2013, 07:39 PM	#20140
dazed Zilvia FREAK! Join Date: Jan 2011 Location: WA Posts: 1,341 Trader Rating: (37) Feedback Score: 37 reviews	Fitting friends front wheels for fun. 18's. 9.5j -22 30mm fenders, ~ -4.8*ish?

07-03-2013, 06:45 AM	#20142
NotLowEnough Zilvia Member Join Date: Aug 2012 Location: durham Age: 32 Posts: 206 Trader Rating: (1) Feedback Score: 1 reviews	16x10 - 0 rolled with a slight pull. Unknown camber front and rear.

07-06-2013, 03:19 PM	#20144
Beemer Leaky Injector Join Date: Sep 2007 Location: regina,sask Age: 35 Posts: 94 Trader Rating: (0) Feedback Score: 0 reviews	Nice fitment what tire sizes are you running up front???^^^^^^

07-06-2013, 07:39 PM	#20145
headup240 Zilvia Addict Join Date: Apr 2008 Location: Charlotte Posts: 666 Trader Rating: (5) Feedback Score: 5 reviews	17x10 +11 215/45/17 Federal 595 Front (20mm Dmax Fenders) 17x11 +11 225/45/17 Federal 595 Rear (Stock body roll and pull)

07-10-2013, 01:26 AM	#20147
Charlie_91 Leaky Injector Join Date: Jan 2013 Location: Australia Age: 33 Posts: 117 Trader Rating: (0) Feedback Score: 0 reviews	Specs: Front - 17 x 9 -2 with 215/40 Camber: around -7* toe: ?? Rear - 17 x 10+12 with 215/45 Camber: around -2 toe: ?? Guard work: Front: Rolled flat Rear: Rolled flat with magazine pull.

07-10-2013, 02:36 AM	#20148
WristWork Zilvia Addict Join Date: Jul 2012 Location: N/A Posts: 742 Trader Rating: (12) Feedback Score: 12 reviews	GTR Grill, Bricks, Paint and thats my favorite stock body silvia Nice!

07-10-2013, 02:39 AM	#20149
Charlie_91 Leaky Injector Join Date: Jan 2013 Location: Australia Age: 33 Posts: 117 Trader Rating: (0) Feedback Score: 0 reviews	Front bar will be painted soon. bricks will make there way on there eventually.. would rather slide. but no grill for me i really like them without.. thanks anyways

07-10-2013, 10:47 AM	#20150
350DAN Leaky Injector Join Date: May 2010 Location: Texas Age: 35 Posts: 67 Trader Rating: (1) Feedback Score: 1 reviews	Sold my Z, wheels are for sale DPE RFK 19x11-6 19x12-14

07-10-2013, 11:06 AM	#20151
turbo2nr Post Whore! Join Date: Jan 2005 Location: queens NYC Age: 38 Posts: 2,561 Trader Rating: (8) Feedback Score: 8 reviews	18x9.5-1 235/40 18x11.5+11 265/35 stock metal fenders w/ pull needs a little more fender work and camber toe adjust and it'll be perfect __________________ s14 kouki ka-t

07-14-2013, 04:25 PM	#20152
MarcD Zilvia Addict Join Date: Jun 2009 Location: U.K Age: 37 Posts: 637 Trader Rating: (10) Feedback Score: 10 reviews	18x9.5 +20 225.40.18 F&R. Anyone want to swap center caps, looking for black ones instead. __________________ Instagram:@marcjzx

07-15-2013, 08:49 PM	#20153
driftsucky Zilvia FREAK! Join Date: May 2007 Location: Rochester NY Age: 44 Posts: 1,345 Trader Rating: (1) Feedback Score: 1 reviews	18x9.5 12 225/40 18x12 -2 275/35 i'M WAiting for non shitty pics. Sooo, in the meantime... 1 is processed __________________ @be_henney kranstogram is full of nonsense and foolishness.

07-19-2013, 11:54 PM	#20154
Thedriftbadger Zilvia Junkie Join Date: Jun 2013 Location: ontario Posts: 305 Trader Rating: (0) Feedback Score: 0 reviews	Can anyone id these? Sorry for the shitty pic, it's the only one i have

07-20-2013, 12:32 AM	#20155
hai_tech Leaky Injector Join Date: May 2013 Location: brooklyn park,mn Posts: 57 Trader Rating: (0) Feedback Score: 0 reviews

07-20-2013, 11:54 AM	#20156
mpapers22 Leaky Injector Join Date: Feb 2012 Location: pa Posts: 102 Trader Rating: (0) Feedback Score: 0 reviews	18x9 +8 215/40 18x10 +13 225/40