Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!* - Page 674 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

deolio · 09-05-2013, 03:18 PM

when you try to take fitment pictures you should straighten your wheels...

Struggle · 09-06-2013, 11:36 AM

just for you darling.

rears need more spacing. almost tempted to see how far off it would be with a 25mm bolt on spacer at the rear. deffo don't want to cut these arches out for overfenders.

TTnickdizzle · 09-07-2013, 09:49 PM

Got the driverside done......

R:18x10.5+0
F:18x10.5+15
245/40s

*revat619* · 09-08-2013, 06:27 PM

Went more low and spaced the fronts 5mm. It's not exactly where i want it, but with these tire sizes this is as close as its gonna get. It rubs at full lock in the front and under hard cornering in the rear. Should be eliminated with smaller tires.

18x9.5 +7 effective 225/40
18x10.5 + 15 255/35

Not sure of the camber. Not getting it aligned until i get my new tires, 215/40 and 245/35.

jsu1012 · 09-09-2013, 08:02 AM

18x9, +15 | 225/40/18
18x10.5, +12 | 255/35/18

swervin36 · 09-12-2013, 10:10 AM

Quote:

Originally Posted by Struggle

just for you darling.

rears need more spacing. almost tempted to see how far off it would be with a 25mm bolt on spacer at the rear. deffo don't want to cut these arches out for overfenders.

Holy chet! This thing looks so fucking mean! Well done

ignited · 09-12-2013, 10:36 AM

Weds Kranze Cerberus II
19x11.5 -10 on 245/40/19 (going a tad wider with a lower profile)
+40mm front overfenders
19x13 -26 on 285/30/19 (going to try a 295/30 to avoid de-beading)
+50mm rear overfenders (had to mount an additional inch to clear wheels)

kunt_masha · 09-12-2013, 10:41 AM

^ how did you space out your rear overs?

Forum rules:

18x12 -14, 265/35/18, -.5*

tengo240 · 09-12-2013, 01:15 PM

Quote:

Originally Posted by kunt_masha

^ how did you space out your rear overs?

Forum rules:

18x12 -14, 265/35/18, -.5*

you bow them ,then rivet them in place.

R3cK · 09-15-2013, 08:27 AM

anyone got some pics of how low you can go with a tein super drift?

***FaLKoN240*** · 09-15-2013, 12:16 PM

Quote:

Originally Posted by R3cK

anyone got some pics of how low you can go with a tein super drift?

This was quite a while ago. Could've went lower than this.

R3cK · 09-16-2013, 01:26 AM

thx for the pics FaLKoN240
those kicks are 18 inch?

got a bad feeling about slamming my s13. think i need those geomasters (-50mm rear & -45mm front) because i want to keep my super drift.

Sean-B · 09-17-2013, 02:18 AM

Veilside Andrew Racing V

R: 18" x 12" et-8 265/35/18 eagle F1 -1.2
F: 18" x 9.5" et3 225/40/18 eagle F1 -2.5

***FaLKoN240*** · 09-17-2013, 10:37 AM

Quote:

Originally Posted by R3cK

thx for the pics FaLKoN240
those kicks are 18 inch?

got a bad feeling about slamming my s13. think i need those geomasters (-50mm rear & -45mm front) because i want to keep my super drift.

Front 17x9 +17 rear 18x9.5 +12

92-sr20-s13 · 09-18-2013, 06:32 PM

18x9.5 +12 225/40

18x10.5 +0 235/40

DomChan · 09-18-2013, 06:49 PM

F:18x9.5 -6
R:18x10.5 +7

208s14.5 · 09-18-2013, 08:27 PM

^^tire specs?

DomChan · 09-23-2013, 06:37 PM

Quote:

Originally Posted by 208s14.5

^^tire specs?

215/35 and will be 225/40 rears

R3cK · 09-24-2013, 03:46 AM

ok good news.
the super drift goes pretty low.

testet the work vs-edition in 17x9 et +5 with 235/45
s14 knuckle and oem fenders in the front
+30mm overfenders in the rear

the front fit so well i instant jizzed
i will mount some 17x10 in the rear because there is enough space.

nevaland9 · 09-25-2013, 12:19 PM

Quote:

Originally Posted by fckillerbee

I think this looks gross...it's just too much camber. but those dudes in japland are doing the same. sooooo....eventually someone bites.

as much as I don't like it....what are the specs?

camber? width of wheels? fender size?

also...i'm guessing this picture was the final pic, and those others were before pictures? as it looks like the left side of the vehicle has less camber...but this picture is different then all of them.

specs please.

Ouch, car and wheels never even saw the road in those colors.

SAFD 18X12.5 18X10 -20squared
-50mm rears 40mm fronts.... has way smaller tires now and cars matte dark grey......still a pos

LoFoSho · 09-25-2013, 12:30 PM

Rear: 18x10.5+20 -2*camber 255/35
Front 18x9.5 +20 (-10effective) -6* camber 225/40

Posted some crappy pics a few months back... this ones a little better I guess.

MarcD · 09-28-2013, 06:23 AM

18x9.5 +20

chuki monsta s13 · 09-30-2013, 03:25 PM

here is my coupe 17x10+8 and 17x10-5 215/40 and 215/45

new2sr20 · 09-30-2013, 03:44 PM

18x10 +20 in the rear with 245/40/18 and oem camber spec.
18x9 +22.5 in the front with 225/40/18 and oem camber spec.

jaysgottaredtop · 09-30-2013, 04:45 PM

Quote:

Originally Posted by deolio

when you try to take fitment pictures you should straighten your wheels...

your complaints are invalid.

F:
wide rear ZG flares
+56mm LCAs
32mm spacers
16x9 +0 wheels (-32mm effective)
225/45/16

R (pictured drift spares):
wide rear ZG flares
20mm + 25mm spacers
17x10.5 +20 wheels (-25mm effective)
255/40/17

in daily form:

F:
wide rear ZG flares
+56mm LCAs
32mm spacers
16x9 +0 wheels (-32mm effective)
225/45/16

R:
wide rear ZG flares
7mm spacers
16x10 -25 wheels (-32mm effective)
245/45/16

*prepares for the "16s are gay" comments*

92-sr20-s13 · 10-02-2013, 04:22 PM

18x9.5 +12 225/40R18

18x10.5 +0 235/40R18

vespaman · 10-04-2013, 11:38 PM

18x10 -10 ( -16 effective 6mm spacer to clear Endless 6pot caliper) 225/35/18
18x11.5 -10 265/35/18

wolfpack · 10-05-2013, 02:52 PM

19x10 +0
19x11 +0

lflkajfj12123 · 10-07-2013, 12:26 AM

Quote:

Originally Posted by vespaman

18x10 -10 ( -16 effective 6mm spacer to clear Endless 6pot caliper) 225/35/18
18x11.5 -10 265/35/18

dope ride

this gangster shit happened to me on friday

i think my panasport is slowly leaking air

the sidewall completely separated from what i suspect was low air pressure

Lil_D · 10-07-2013, 12:34 PM

front 18x10 -47 225/35
rear 18x12 +0 265/35

09-05-2013, 03:18 PM	#20191
deolio Post Whore! Join Date: Mar 2007 Location: Sacramento, CA Age: 35 Posts: 4,694 Trader Rating: (13) Rides Gallery: deolio Feedback Score: 13 reviews	when you try to take fitment pictures you should straighten your wheels... __________________

09-08-2013, 06:27 PM	#20194
revat619 Retired General Join Date: Jun 2002 Location: San Diego Posts: 4,672 Trader Rating: (7) Feedback Score: 7 reviews	Went more low and spaced the fronts 5mm. It's not exactly where i want it, but with these tire sizes this is as close as its gonna get. It rubs at full lock in the front and under hard cornering in the rear. Should be eliminated with smaller tires. 18x9.5 +7 effective 225/40 18x10.5 + 15 255/35 Not sure of the camber. Not getting it aligned until i get my new tires, 215/40 and 245/35. __________________ www.Jspec.com www.SpeedAlliance.com www.PoweredByMax.net Instagram: @rjsladerade

09-09-2013, 08:02 AM	#20195
jsu1012 Zilvia FREAK! Join Date: May 2011 Location: Oklahoma Age: 38 Posts: 1,116 Trader Rating: (13) Feedback Score: 13 reviews	18x9, +15 \| 225/40/18 18x10.5, +12 \| 255/35/18 __________________ @streetstyle_jay

09-28-2013, 06:23 AM	#20212
MarcD Zilvia Addict Join Date: Jun 2009 Location: U.K Age: 38 Posts: 637 Trader Rating: (10) Feedback Score: 10 reviews	18x9.5 +20 __________________ Instagram:@marcjzx Last edited by MarcD; 09-30-2013 at 08:08 AM..

09-30-2013, 03:25 PM	#20213
chuki monsta s13 Zilvia Addict Join Date: Oct 2009 Location: Los Angeles, CALI Age: 33 Posts: 950 Trader Rating: (23) Feedback Score: 23 reviews	here is my coupe 17x10+8 and 17x10-5 215/40 and 215/45 __________________ OHHHH SHITTTT!!

09-06-2013, 11:36 AM	#20192
Struggle Leaky Injector Join Date: Jun 2012 Location: manchester England Age: 34 Posts: 54 Trader Rating: (0) Feedback Score: 0 reviews	just for you darling. rears need more spacing. almost tempted to see how far off it would be with a 25mm bolt on spacer at the rear. deffo don't want to cut these arches out for overfenders.

09-07-2013, 09:49 PM	#20193
TTnickdizzle Zilvia Member Join Date: May 2008 Location: San Bernardino, Ca Posts: 155 Trader Rating: (0) Feedback Score: 0 reviews	Got the driverside done...... R:18x10.5+0 F:18x10.5+15 245/40s

09-12-2013, 10:36 AM	#20197
ignited Leaky Injector Join Date: May 2010 Location: Northern California Posts: 138 Trader Rating: (6) Feedback Score: 6 reviews	Weds Kranze Cerberus II 19x11.5 -10 on 245/40/19 (going a tad wider with a lower profile) +40mm front overfenders 19x13 -26 on 285/30/19 (going to try a 295/30 to avoid de-beading) +50mm rear overfenders (had to mount an additional inch to clear wheels)

09-15-2013, 08:27 AM	#20200
R3cK Zilvia Member Join Date: Nov 2011 Location: bavaria Posts: 159 Trader Rating: (0) Feedback Score: 0 reviews	anyone got some pics of how low you can go with a tein super drift?

09-16-2013, 01:26 AM	#20202
R3cK Zilvia Member Join Date: Nov 2011 Location: bavaria Posts: 159 Trader Rating: (0) Feedback Score: 0 reviews	thx for the pics FaLKoN240 those kicks are 18 inch? got a bad feeling about slamming my s13. think i need those geomasters (-50mm rear & -45mm front) because i want to keep my super drift.

09-17-2013, 02:18 AM	#20203
Sean-B Join Date: Feb 2011 Location: England Age: 35 Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	Veilside Andrew Racing V R: 18" x 12" et-8 265/35/18 eagle F1 -1.2 F: 18" x 9.5" et3 225/40/18 eagle F1 -2.5

09-18-2013, 06:32 PM	#20205
92-sr20-s13 Leaky Injector Join Date: Oct 2006 Location: calgary Age: 36 Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	18x9.5 +12 225/40 18x10.5 +0 235/40

09-18-2013, 06:49 PM	#20206
DomChan Zilvia FREAK! Join Date: Aug 2010 Location: San Diego Posts: 1,207 Trader Rating: (23) Feedback Score: 23 reviews	F:18x9.5 -6 R:18x10.5 +7

09-18-2013, 08:27 PM	#20207
208s14.5 Zilvia Member Join Date: Dec 2011 Location: Boise, ID Posts: 195 Trader Rating: (2) Feedback Score: 2 reviews	^^tire specs?

09-24-2013, 03:46 AM	#20209
R3cK Zilvia Member Join Date: Nov 2011 Location: bavaria Posts: 159 Trader Rating: (0) Feedback Score: 0 reviews	ok good news. the super drift goes pretty low. testet the work vs-edition in 17x9 et +5 with 235/45 s14 knuckle and oem fenders in the front +30mm overfenders in the rear the front fit so well i instant jizzed i will mount some 17x10 in the rear because there is enough space.

09-25-2013, 12:30 PM	#20211
LoFoSho Leaky Injector Join Date: May 2010 Location: Gunshine State Age: 35 Posts: 104 Trader Rating: (5) Feedback Score: 5 reviews	Rear: 18x10.5+20 -2camber 255/35 Front 18x9.5 +20 (-10effective) -6 camber 225/40 Posted some crappy pics a few months back... this ones a little better I guess.

09-30-2013, 03:44 PM	#20214
new2sr20 Zilvia Member Join Date: Apr 2007 Location: Bowling Green,KY Age: 40 Posts: 283 Trader Rating: (11) Feedback Score: 11 reviews	18x10 +20 in the rear with 245/40/18 and oem camber spec. 18x9 +22.5 in the front with 225/40/18 and oem camber spec.

10-02-2013, 04:22 PM	#20216
92-sr20-s13 Leaky Injector Join Date: Oct 2006 Location: calgary Age: 36 Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	18x9.5 +12 225/40R18 18x10.5 +0 235/40R18

10-04-2013, 11:38 PM	#20217
vespaman Zilvia Addict Join Date: Sep 2006 Location: California Posts: 781 Trader Rating: (64) Rides Gallery: vespaman Feedback Score: 64 reviews	18x10 -10 ( -16 effective 6mm spacer to clear Endless 6pot caliper) 225/35/18 18x11.5 -10 265/35/18 __________________ IRRegular Kids!!!!

10-05-2013, 02:52 PM	#20218
wolfpack Zilvia Member Join Date: Jan 2013 Location: The Shop Posts: 247 Trader Rating: (6) Feedback Score: 6 reviews	19x10 +0 19x11 +0 __________________

10-07-2013, 12:34 PM	#20220
Lil_D Zilvia Addict Join Date: Nov 2010 Location: The Bay Area Age: 31 Posts: 733 Trader Rating: (5) Feedback Score: 5 reviews	front 18x10 -47 225/35 rear 18x12 +0 265/35 __________________ @lild415