** drag zilvians chime in**

[ForeignMuscle]

Are you running the factory sway bars or with the front disconnected?

[S@nt0s]

Originally Posted by ForeignMuscle

Are you running the factory sway bars or with the front disconnected?

front is removed and i currently have a OEM in the rear but plan to upgrade to a 22mm or bigger

[2js1392]

I found a parts q45!! Waiting for a call back all I need is the dss driveshaft and 1 z32 axle and I should be good.

[S@nt0s]

Originally Posted by 2js1392

I found a parts q45!! Waiting for a call back all I need is the dss driveshaft and 1 z32 axle and I should be good.

dont waste your $ on a DSS driveshaft get a local driveshaft shop to make one

[picsbypenny]

i cant wait to start dragging my 240!

[2js1392]

Ya 1300 is a big hit on just a driveshaft

[S@nt0s]

Originally Posted by 2js1392

Ya 1300 is a big hit on just a driveshaft

Il make you a aluminum for half the price

[2muchboost]

Im wondering what after market suspension arms you guys are running....if any.

I ended up getting:

Rear Upper Control Arms
Toe Rods/Arms

[S@nt0s]

i only have Tein tension rods up front everything else is stock.

[turbociv910]

just rear traction rods here with reinforcement on that part of the subframe where they connect

[turbociv910]

Is anyone using a trans brake and leaving on 400-450 ramping boost to 600 ish throughout first? Ive got the q45 setup in the back and am worried it cant hold it.

26x10s

[jholman05]

Here's my setup so far

Stock S14 KA-T
CalumRT ecu
Launch control set at 4500rpm with 10psi, need to turn it up.
GTi-R T28 @ 10psi
PSM HMIC
DW550cc
N62
AEM Water/Meth
Spec Stage 3
Fidanza aluminum flywheel
S15 HLSD
26x10.5x15 MT Et street bias ply on 15x8 5.5" b.s. Weld Draglites
Stance GR+pro coilovers

12.8 @ 109mph
1.8 60'



From this year, ignore the 5" exhaust with rain cap, it was for lol's


Last years setup on 26x11.5x17 ET streets on 03-04 cobra wheels shaved 5mm off the backside to fit.

[turbociv910]

do you have more pics of the car, trying to decide which size wheels i need

[Vetal]

Originally Posted by S@nt0s

front is removed and i currently have a OEM in the rear but plan to upgrade to a 22mm or bigger

Do you think removing front sway gains you even 0.01s?

[jholman05]

Originally Posted by turbociv910

do you have more pics of the car, trying to decide which size wheels i need

Yes, did you want more pictures of the wheel fitment?

I have quite a few on my dad's KA-T two tone, with just eibach prokit/agx suspension. If that would help.

[S@nt0s]

Originally Posted by Vetal

Do you think removing front sway gains you even 0.01s?

push down on your car with the front sway on then do it removed and come back with the results.
removing the front sway allows for free movement by removing tension to help with weight transfer.

[turbociv910]

Originally Posted by jholman05

Yes, did you want more pictures of the wheel fitment?

I have quite a few on my dad's KA-T two tone, with just eibach prokit/agx suspension. If that would help.

yes, from what ive read, 26x10 on a 15x8 with 5.5 bs fits under stock/rolled/pulled fenders, just trying to see more

[turbociv910]

will a 15x8 with 3.75 inch backspacing fit?

[jholman05]

Originally Posted by turbociv910

will a 15x8 with 3.75 inch backspacing fit?

This is on my dad's car, eibach prokits, agx shocks. 15x8 5.5" backspace, 26x10.5 ET streets






Then for good measure we decided to go ahead and roll the fenders.


More pictures can be found here
KA-T Version 2.0 | Facebook

[turbociv910]

cool thanks man!!^^ awesome pics too

looks like the 3.75 will not fit, my fenders are pulled, but not 1.75 inches!

[S@nt0s]

MT ET street 26/10.5 is almost the same as the 26/8.5ET drag

26/10.5 ET street
section width 10.5
thread width 8.3
compound M5

26/8.5 ET Drag
section width 9.90
thread width 8.10
Compound L8

the Drag is a softer compound while the ET street is in the medium range.
dont let the "size #" fool you the 26/8.5 is plently of tire

[jholman05]

Here is another local guys setup.
Last year car was..
RB26 6xxhp
42R
RB25 Trans
Twin disc?
1 piece driveshaft
q45 diff, pretty sure he swapped gearing a couple times
26x11.5x16 ET Street on NA z32 wheels









This year he's getting even more crazy.

[Briou]

So here is my set up and what I ran this past weekend.

S13
Engine:
redtop sr20det
Precision 5128
Greddy intake
fmic
full 3" exhaust
Tomei exhaust mani
full fuel system with 1000cc injectors
Enthalpy tune
20psi

Suspension:
Fully adjustable arms front and rear
Tien mono flex coils
Tanabe front sway bar
Stock rear sway bar

Tires:
Mickey Thompson
275/60-r15

The best run I could get was a 12.87 @109mph with a 2.0s 60'
i couldn't get a good burn out because my front brakes are all sorts of spongy (I need new lines) I still feel like I should be getting better et'....Maybe I just need some more practice....I know it will go down as I get better 60's but still I feel like I should be in the 11's

Idk...any tips??

[S@nt0s]

what was your 8th mile et and trap?

[Briou]

Man I will have to get back to you...I lost my time slips but when I find them I will post it up...I feel like my springs are too stiff, I'm thinking about getting some swift springs but don't know what to get...

[S@nt0s]

ya just want to see how much you gained on the back half but i thin kwith just a 109 you are in the 12.0's and if you get a good 60 you could break 11's but will have to drive the piss out of it

[Briou]

Found it

[Briou]

I can't get this pic to resize...sorry

[jholman05]

The 5128 is comparable to a 2871 correct? I would expect one of those on 20psi to get traps speeds around 115mph? My GTi-R T28 at 10psi yields 107-109traps. What fuel are you running 91?

[Briou]

running 93...I don't know what it is with my car....well it was like 95 degrees outside and rather humid.....