my vq35 s14 swap thread pic hevy - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

irax · 04-13-2011, 02:15 AM

if you are going to have a flashed ecu, you will need only the gas pedal plug, and the OBDII plug from the 350z dash harness, and the F8, and the wiper plug from the s14 harness.

once you have those plugs, and the pinouts it shouldn't be that bad

ALSO, the stock maf is pretty good, so there isn't really a need to upgrade it at all

dorrifto · 04-13-2011, 08:56 AM

Quote:

Originally Posted by irax

if you are going to have a flashed ecu, you will need only the gas pedal plug, and the OBDII plug from the 350z dash harness, and the F8, and the wiper plug from the s14 harness.

once you have those plugs, and the pinouts it shouldn't be that bad

ALSO, the stock maf is pretty good, so there isn't really a need to upgrade it at all

+1

and also, dont expect your guages to work. you can wire in your tack, but as for the speedo... that is a lil tricky. can always modify an ABS sensor to send a signal to your speedo. that is how i am doing it. i have the J30 diff with the ABS sensor so im putting it to use.

04-13-2011, 02:15 AM	#1
irax Post Whore! Join Date: Aug 2003 Location: San Diego Age: 40 Posts: 4,248 Trader Rating: (4) Feedback Score: 4 reviews	if you are going to have a flashed ecu, you will need only the gas pedal plug, and the OBDII plug from the 350z dash harness, and the F8, and the wiper plug from the s14 harness. once you have those plugs, and the pinouts it shouldn't be that bad ALSO, the stock maf is pretty good, so there isn't really a need to upgrade it at all __________________ Drives a BRZ and is building a V6 S12 coupe.