Official Drift Freaq Transmission mount Group buy.

[drift freaq]

Ok here it is, lots of people asking actually started to list up people before here we are.
This is for Trans mount that will go with the engine mounts I sell. It will have a bracket mount on it for your exhaust hanger. This is going to cost $120 per unit. shipping will be $16 I know its not cheap but it will be the only aftermarket trans mount with an exhaust bracket mount.

UPDATE TIME: cost of trans mount is now $120 standard retail. If you buy engine mounts without after next month you will get a $10 discount overall which will come out to $230 plus $19 for shipping that is saving you ten dollars by buying the combo.

ok as promised here are some pics and the run will be done by next thurs.

this is the prototype one and the exhaust studs were not in in these pics.








1.Prime
2.
3.
4.
5.

[Prime]

Why aren't I at the top of this list, damnit? I've been down for almost a year!

Since text doesn't translate well, consider the tone of the post "lighthearted".

[SupaDoopa]

Is there a picture of reference so the people know exactly what they're getting and what to expect?

[slider2828]

Yeah will need some picture and probably how it mounts on the car? Maybe compare the height and weight to the standard nismo tranny mount?

[drift freaq]

Originally Posted by slider2828

Yeah will need some picture and probably how it mounts on the car? Maybe compare the height and weight to the standard nismo tranny mount?

it mounts to the car exactly like your stock trans mount does. The design concept is to have it bolt right it in.

Unlike other urethane products on the market it will have a metal plate on top and bottom so it will bolt up to the transmission with stock trans to mount bolts. The bottom will bolt into your cross member in the same points that the stock tranny mount does. There will be a 80 durometer block of urethane in between them. The top plate will be a folded piece overhanging the back of the trans mount with bolts in them for the exhaust hanger.
Neither side will be in contact with each other beyond the urethane to insure minimal to none vibrational transfer.
I do not have pics of the concept right now but what I described above pretty much gives you the picture and I would not even be putting it out here if I did not know or think you would like it.

[drift freaq]

I am going to juice this up a bit for each person that commits to a trans mount they will be able to purchase a set of the Green mounts for $115 that effectively gives them everything for $200 and when the trans mounts are done I can ship everything in the same box for $15.

[hippo_chips]

Count me in !

[BlakDrag0n9]

Sorry I couldn't find any info but what do these mounts fit? S13, S14, SRs, KAs?

[drift freaq]

Originally Posted by BlakDrag0n9

Sorry I couldn't find any info but what do these mounts fit? S13, S14, SRs, KAs?

you did not search hard enough. LOL no worries there is a review thread in my sig. They are for KA/SR/CA S13 and S14 hell you could run them in a S15 if you wanted to.

1. Prime
2. Hippo chips
3.
4.
5.

lets do this up people.

[drift freaq]

we only need 3 more people. lets this thing going so it can get started on next week.

[moco]

Do you have to pay now or when they are made? I would be in for a complete set

[drift freaq]

Originally Posted by moco

Do you have to pay now or when they are made? I would be in for a complete set

On the trans mount yes for the initial run we need an upfront purchase. I need to know there is enough purchased to warrant the run. As for the engine mounts you could wait till the trans mount run is done to pay for engine mounts and since you put the money down on the trans mount you would qualify for the discount on the engine mounts.

[drift freaq]

1. Prime
2. Hippo chips
3. moco
4.
5.

ok people this is loading up quick when can expect to go into production next week at this rate 2 more people lets do it.

[drift freaq]

we now are at 4

1. Prime
2. Hippo chips
3. moco
4. oldrice
5.

[Nizzan4u2nv]

If I would have known I coulda got this. Just bought a circuit sports mount to go with the green engine mounts I just got.

[drift freaq]

Originally Posted by Nizzan4u2nv

If I would have known I coulda got this. Just bought a circuit sports mount to go with the green engine mounts I just got.

sorry man the decision to roll on this was last minute. It actually seems to be filling up quickly too.

[Nizzan4u2nv]

Originally Posted by drift freaq

sorry man the decision to roll on this was last minute. It actually seems to be filling up quickly too.

It's all good.

If these are anything like the motor mounts these will have top notch fitment and quality. Jump on this people.

[drift freaq]

and now we are 5 this does not mean people cannot get in on this. I am going to start on things but keep the list open and for anyone who does the deal they get a discount on the mounts if they need mounts. $5 off a set of mounts if you order the trans mount. There will be 5 more slots open for this offer.
this also means the first 5 people should paypal me so we can get this train rolling [email protected] is the paypal address.
1. Prime
2. Hippo chips
3. (open now because moco has no funds)
4. oldrice
5.dori240

6.
7.
8.
9.
10.

[drift freaq]

and we have our first fall out moco does not have funds.

so there is one spot open. Do not worry though I have someone that will probably take it. I just have to contact them. We are still moving forward.

[drift freaq]

yes people one more person and we have this rolling.

[90pearlz]

Cant wait to see the product. I would jump on this as i was just about to buy a Peak Performance mount, but Im the type that needs pics and review for a safe purchase. I dont doubt you and i know you make great products, cant wait to see them. Thanks

[drift freaq]

Originally Posted by 90pearlz

Cant wait to see the product. I would jump on this as i was just about to buy a Peak Performance mount, but Im the type that needs pics and review for a safe purchase. I dont doubt you and i know you make great products, cant wait to see them. Thanks

Nothing personal but this is the exact attitude that killed the possibility of this even happening for a long time.

It seems like you want the product but you doubt the product. I am sorry for that.

I am taking a big chance going forward here. I think that gets lost on people. Hence the reason I doing it group buy style. I have to be safe. Its something all people interested should think about.

This is not 2003-2004 where a manufacturer could just bring a product for our cars to market expecting rosy pictures and sales.

Anyways lets move forward folks.

[hippo_chips]

COME ON! Let get these things made. Just one more person! Someone, anyone...

[rdoni2]

Is everyone else committed and ready to pay? I'll take that last spot if we can get this going!

[drift freaq]

Originally Posted by rdoni2

Is everyone else committed and ready to pay? I'll take that last spot if we can get this going!

yes they are, in fact they have paid so go ahead and paypal me $100 unless you want mounts two then it would be $215. My paypal is [email protected]

[rdoni2]

Awesome, I definitely want the the tranny mount and the motor mounts as well! I'll PayPal you $215 right now. It will be from PayPal account: [email protected]
Thanks so much! Can't wait to get these in my hands!

[ze12o]

I may jump on this as well... Let me see if i can get the funds up.

[Riedell]

Quick question: will your poly tranny mounts fit for an automatic tranny or just a manual tranny? Or both?

Thanks.

[rdoni2]

Payment sent!

[drift freaq]

Originally Posted by Riedell

Quick question: will your poly tranny mounts fit for an automatic tranny or just a manual tranny? Or both?

Thanks.

It will designed specifically for manual trans. whether or not you can use on an auto trans ? I do not know. Most people want it for a manual trans setup.

Oh and rdoni money received. This is officially under way on the production run. LIke I posted earlier its not to late for people to get in. So if we round up another 5 people this week we will just increase the initial run.