Godspeed Project Engine Rods KA/SR/RB

[Fatboy Garage]

Godspeed Project Engine Rod Packages!!!

KA24E/DE Engine Rods


KA Rod Specs:
Spec:
- Rod Length: 6.496" , 165mm
- B.e width : 24.77 mm
- S.E. Bore : 21 mm
- B.E Bore: 53.01 mm
- B.E. Width: 24.77 mm
- Material: 4340 Steel
- Appr. Weight: 580(g) with bolts

LIFE TIME WARRANTY

• Model: CRS-KA24DE

$250 Shipped $235 Local Pick Up (El Monte, CA), CA Customers add 9.25% Tax




SR20 Engine Rods



SR Rod Specs:
Spec:
- Rod Length: 5.366" , 136.3mm
- Piston Pin Dia: 0.866" , 22mm
- P.E. Width: 0.898" , 22.8mm
- B.E Bore: 2.008" , 51mm
- B.E. Width: 0.898" , 22.8mm
- Material: 4340 Steel
- Appr. Weight: 556(g) with bolts

LIFE TIME WARRANTY

• Model: CRS-SR20

$250 Shipped $235 Local Pick Up (El Monte, CA), CA Customers add 9.25% Tax




RB25 Engine Rods


RB Rod Specs:
- Rod Length: 4.705" , 119.5mm
- Piston Pin Dia: 0.827" , 21mm
- Rod: 2.008" 51mm
- Rew: 0.858" , 21.8mm
- Material: 4340 Steel
- Appr. Weight: 534 (g) each with bolts


LIFE TIME WARRANTY

• Model: CRS-RB25

$350 Shipped $335 Local Pick (El Monte,CA), CA Customers add 9.25% Sales Tax

[ch1873857]

scary. have you sold any of these yet?

[landins13]

terrifying

[DJ-of-E]

only mentions price and specs. Someone could get oem for about the same price.

[koukistylejdm]

lifetime warranty.... is the hole in the block part of it?

[driftage240]

Oh boy now this shit

[Battle Cat]

What a deal. I've always wanted a full built motor with a hole in the side of it. Ordering right nao!

[Fatboy Garage]

Please keep negative comments to yourself. If you have any questions PM us. We have used 100s of our rods with no problem.

[Juantwo3]

^^^^you guys have gone threw 100's of rods???!!!!!!!!!!!! :O

[Fatboy Garage]

About 100 of them including testing, personal use and rods sold to customers. Not one single warranty brought back to us, not one single problem.

[Edwin562]

Not until someone who bought these and tried them out, we shouldn't jump into conclusions.

Look at most of the cars for sale, alot of them have godspeed arms and intercoolers yet there are here trolling. pathetic noobs.

[azndoc]

Please post pics of the 20-25 vehicles currently using this rods in their motor please.

kthxbye

[Fatboy Garage]

I won't have pictures of all cars but our time attack sr20 had the rods, Chris Billedo's build KA had the rods. Drift Speed who is not in business anymore can also vouch for the rods. Thanks

[future]

Wow lol he said pow

He blew his engine lol, now you tell me if was built with godspeed engine parts? Makes sense now.

This is the scariest thing godspeed has made to date

[Fatboy Garage]

Pow blew a STOCK KA that was in his car because his built motor had an oil pump go bad. His new motor is running our rods combined with super tech pistons.

[i need tires]

Ill give it a chance, thanks for answering all my questions Chris

[Fatboy Garage]

No problem i need tires! Enjoy the rods!

[redss]

I am sure in a few months, we will be seeing GS FORGED PISTONS. just in time for Xmas.

[DJ PoW]

I personally have a set of the rods in my new build motor and as far as break in goes, no problems at all. Mind you I am a Garrett sponsored driver, I'm sure 30lbs with a 2867 will be no problem. Thank you Godspeed for making internals affordable.

[DJ PoW]

Originally Posted by Fatboy Garage

Pow blew a STOCK KA that was in his car because his built motor had an oil pump go bad. His new motor is running our rods combined with super tech pistons.

Yes, thanks Chris. I had a completely stock KA in my car when it blew. As most of you know, a stock KA can be pretty strong but what most don't know was that boost was turned up to 16 lbs for that run. It just couldn't take it.

[GeneStarWindGSW]

Originally Posted by DJ PoW

Lol at all the noobs, you guys are pretty stupid if you don't read. Anyways I've been using the rods for quite some time. CRS is a very important part number if you guys are smart but then again none of you that bash godspeed are.

I personally have a set of the rods in my new build motor and as far as break in goes, no problems at all. Mind you I am a Garrett sponsored driver, I'm sure 30lbs with a 2867 will be no problem. Thank you Godspeed for making internals affordable.

so are you saying these are similar or close to eagle rods then based on the part number?

Eagle CRS6496N3D KA24 Engine Steel Forged Rods

are these GS rods similar to these found below?

CRS-6495 for Nissan 240SX-KA24DE engine H-beam connecting rod products from China (Mainland),buy CRS-6495 for Nissan 240SX-KA24DE engine H-beam connecting rod by CRS-6495 from seekpart.com

CRS-6495 for Nissan 240SX-KA24DE engine I-beam connecting rod - Detailed info for CRS-6495 for Nissan 240SX-KA24DE engine I-beam connecting rod,forged 4340 steel connecting rod for Nissan,CRS-6495 for Nissan 240SX-KA24DE engine I-beam connecting rod,

[Hellother]

Tough product to sell. A good point to make is whether warranty covers product only or residual damage due to product failure. Either way it'd be helpful to show some potential buyers how far your actually pushed these rods before an issue arose. Since we all know the name isnt going to sell it for you, maybe some cold hard facts would persuade the people on edge about these.
Just some food for thought

[anti tyler]

i think the biggest thing is actually buying from a legit seller, and not hopping on ebay with a knock-off brand that breaks on a whim.

nevertheless there's no reason to hop in a thread and downtalk an advertiser just because you don't think they're going to perform well. if you're THAT concerned with it, then don't buy them.


i personally will give it a shot, if you build/tune/treat your car right, then there's no reason you should have any issues. after all, like every part, it's going to fail sooner or later.

[Fatboy Garage]

Thank you Tyler, well said. When you are ready let me know pm me . Thanks!

[Battle Cat]

Does it come with ARP Hardware?

[D.Adams]

Not bad at all. I'm cool with seeing new parts come out for a cheep price . Will I buy probably not till I see more people running them with no issues. Sorta look like the eagle H beam rods.

Give it to godspeed though people aleast there trying to help people who can't afford a $800 set of rods

[funes]

man really?

[unseen-forces98]

Lmao this is funny..

[mantas]

Are these plastic just like my control arms that broke? I gotta say gs makes cheap shit that works, lets have some zilvians try these out and leave feedback i might need some eventually. Lol.

[DJ PoW]

I love the dumb people of Zilvia. If you guys don't like Godspeed or don't have anything nice to say then don't post at all.

Go buy your Eagle Rods....

Also Mantas, what broke on you? I'm interested in knowing myself. Have you contact Godspeed about them?