Matts13vert's Socal Dream (Super Stock) KA-T Setup. SR exhaust manifold used! - Page 3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Couped_up'd · 12-21-2010, 01:15 PM

Your engine bay is what japan should have sent us.

Sideways_blksr20 · 12-21-2010, 01:32 PM

Are you using the stock KA Ecu?? What did you use to tune it for the injectors and maf??

fckillerbee · 12-21-2010, 01:40 PM

i'm sorry..i noticed you said something about formula d season....

you plan to compete in this car?

matts13vert · 12-21-2010, 01:53 PM

Quote:

Originally Posted by mikerbike

Does this position the turbo so factory elbow and DP can be used?

I have no idea since I'm not using the factory elbow and DP. I had no issues using the ~3" Greddy Elbow, but did have clearance issues using the 3" DP (it would hit the body).

Quote:

Originally Posted by My240sx

dang your s13 looks super clean. Makes me want a vert haha. If you dont mind me asking, how much did that SR exhaust manifold cost you after getting it modified and all that?

Thanks, you should get one haha. I was pretty much Alex's guinea pig, my manifold was the first he had done so he quoted me a cheaper price of $95, thats including shipping both ways. It may cost a little more now, but if you want a definitive price you should PM him.

Quote:

Originally Posted by usdm180sx

Damn that's sexy. Nuthin' more sexy than a slammed vert with gangster wheels done with gangster offsets. You should have blotted out your license plate though.

Thanks man! You are right. fml.

Quote:

Originally Posted by shoguner

How well does those welds hold up on the cast iron?

It's actually cast steel and they have held up great so far, I expect them to last a very long time.

Quote:

Originally Posted by dex

omg... car is insane.. I love it

Thanks!

Quote:

Originally Posted by imverus

what aero kit is that?

Vertex front and sides, Supermade rear.

Quote:

Originally Posted by ETHANOLED SR

Good Job! Clean and stock looking!

Thanks you!

Quote:

Originally Posted by Couped_up'd

Your engine bay is what japan should have sent us.

I know right. haha

Quote:

Originally Posted by Sideways_blksr20

Are you using the stock KA Ecu?? What did you use to tune it for the injectors and maf??

Tuned by R.S. Enthalpy. Perfect AFR's during idle, cruise, and WOT. Love it.

Quote:

Originally Posted by fckillerbee

i'm sorry..i noticed you said something about formula d season....

you plan to compete in this car?

You did? Where?
No, I have no idea where you got this info from.

Highway Riding · 12-21-2010, 02:10 PM

Very clean looking

RyanS13 · 12-21-2010, 02:11 PM

Reaaaal clean man. I see your car always over here by my house. We live pretty close to each other.

fckillerbee · 12-21-2010, 02:19 PM

Quote:

Originally Posted by matts13vert

You did? Where?
No, I have no idea where you got this info from.

ahhh....read it wrong...."on your way to formula d"

i read it as...well i'm sure you get the idea.

cool setup none the less....power numbers yet?

gzer750 · 12-21-2010, 03:05 PM

mosdef a sick vert. post some more pics for us fellow vert guys.

Vicious Beaner! · 12-21-2010, 07:53 PM

Quote:

Originally Posted by Couped_up'd

Your engine bay is what japan should have sent us.

+1 woulda been awssssomeee

98_240sx_se · 12-21-2010, 10:12 PM

Quote:

Originally Posted by shoguner

How well does those welds hold up on the cast iron?

the welds hold up great. i give a one year guarantee on the work. even though i have complete confidence that it will last MUCH MUCH longer!

matts13vert · 12-21-2010, 10:13 PM

Quote:

Originally Posted by Highway Riding

Very clean looking

Thanks man

Quote:

Originally Posted by irocknikes123

Reaaaal clean man. I see your car always over here by my house. We live pretty close to each other.

Thanks dude! I see you around too lol. Sorry I didnt say hi last time I saw you on cherry and artesia, this happened lol.

I was smoking up the 91 lol

Quote:

Originally Posted by fckillerbee

ahhh....read it wrong...."on your way to formula d"

i read it as...well i'm sure you get the idea.

cool setup none the less....power numbers yet?

Quote:

Originally Posted by Mrought

.....................

It's all good. Not yet but I will post as soon as I get them.

Quote:

Originally Posted by gzer750

mosdef a sick vert. post some more pics for us fellow vert guys.

Thanks!

More pics from the BBQ

98_240sx_se · 12-22-2010, 12:16 AM

very clean matt. i like your rear bumper. which one is it, looks similar to the rocket bunny one..

driftsilvias13 · 12-22-2010, 09:58 AM

Looks clean! I always wanted a vert. Did those xxr 521s come polished or did you get them polished?

matts13vert · 12-22-2010, 12:42 PM

Quote:

Originally Posted by 98_240sx_se

very clean matt. i like your rear bumper. which one is it, looks similar to the rocket bunny one..

Thanks Alex. Its a Supermade Instant Gentleman.

Quote:

Originally Posted by driftsilvias13

Looks clean! I always wanted a vert. Did those xxr 521s come polished or did you get them polished?

Thanks, I bought them that way from nlmotoring, a little pricier than the flat black but imo look much better.

ixfxi · 12-23-2010, 11:56 AM

INSTANT GENTLEMAN

jesus

s14freak93901 · 12-23-2010, 12:00 PM

thats a damn clean KA-T setup.

98_240sx_se · 12-25-2010, 03:08 PM

hmm interesting, i have never seen/heard of one before

jbretz · 12-25-2010, 05:17 PM

im curious on your wheel setup... im sure it was stated in the build somewhere but i was wondering the specs. im assuming 18x10's?

matts13vert · 12-25-2010, 11:28 PM

Quote:

Originally Posted by jbretz

im curious on your wheel setup... im sure it was stated in the build somewhere but i was wondering the specs. im assuming 18x10's?

specs are
18x10 0 offset 245/35 FRT
18x10 -5 offset 245/40 RR

hellion240sx · 12-26-2010, 11:08 AM

don't know if i read it or not, but what did you do to make them fit? roll? pull? spacers? c/o's do you have on there? mulltilink?

matts13vert · 12-26-2010, 01:39 PM

Quote:

Originally Posted by hellion240sx

don't know if i read it or not, but what did you do to make them fit? roll? pull? spacers? c/o's do you have on there? mulltilink?

Front:
Rolled the fronts, hammered in all lips inside the wheel well, Max negative camber and added a few more degrees of neg camber with eccentric bolts on the spindle.

Rear:
Rolled and pulled 15mm, Max negative camber with Megan v1 Ruca's and eccentric bolts. Other multilink, SPL traction rods, Isis toe rods.

Lowered on Cusco coils.

jbretz · 12-26-2010, 06:03 PM

hows the tire wear? i love the stance and everything about the vert for some reason.

Houseof1817 · 12-26-2010, 11:16 PM

Probably not too bad, that is if you are away from the drudgery of the highway and clutch kicks.

matts13vert · 12-26-2010, 11:23 PM

My rear dz101's are almost bald on 1" of the inside tread, they lasted from sept '10 til now. Ive gone thru many fronts, not because of wear but because I kept changing my sizing but honestly to me its not that bad. And I drive my car ALOT, it's my only car and daily driven.

spooled240 · 12-26-2010, 11:41 PM

it's amazing how good those wheels look lol

Razi · 12-27-2010, 03:37 AM

The shine will blow you away in person haha.

Matt, did the KA MAF bolt right up to the SR intake?
I might be picking up an SR box soon. I also just bought an SR manifold. Dun dun dun....

Tantwoforty · 12-27-2010, 03:56 AM

Quote:

Originally Posted by Razi

My engine bay from the 1st K1 meet.
I made my own "cooling panel" and painted it black to cover the front mount.
Currently, I got rid of all those vacuum lines at the front.
I might tuck my injector harness and stuff, and neaten up my fuel line stuff.

I think i might have taken that picture razi.
super hot.
it inspired me to do a ka-t
so i did this :

not exactly stock looking. but its just a t25/370/n60.
hows yours feel?
as far as power and such

Ceepo · 12-27-2010, 04:03 AM

I really dig this car, its looks fantastic, keep it up

Razi · 12-27-2010, 04:05 AM

Nice looking clean dude!
Is it close to being done?

Mine feels really good.
Last week, I unhooked the swirl valve's vacuum hose so the butterflys always stay open and now the boost comes on nice and smooth.

yetijeff · 12-27-2010, 04:18 AM

looks really clean! good work. are u not running a bov? or am i blind

12-21-2010, 02:11 PM	#66
RyanS13 Zilvia Addict Join Date: Jul 2009 Location: CA Posts: 657 Trader Rating: (14) Feedback Score: 14 reviews	Reaaaal clean man. I see your car always over here by my house. We live pretty close to each other. __________________

12-22-2010, 09:58 AM	#73
driftsilvias13 Nissanaholic! Join Date: Apr 2005 Location: Los Angeles Posts: 2,297 Trader Rating: (54) Feedback Score: 54 reviews	Looks clean! I always wanted a vert. Did those xxr 521s come polished or did you get them polished? __________________

12-25-2010, 05:17 PM	#78
jbretz Zilvia Addict Join Date: Oct 2008 Location: Jersey Posts: 754 Trader Rating: (6) Feedback Score: 6 reviews	im curious on your wheel setup... im sure it was stated in the build somewhere but i was wondering the specs. im assuming 18x10's? __________________

12-26-2010, 11:08 AM	#80
hellion240sx Zilvia FREAK! Join Date: Nov 2003 Location: NOLA Age: 42 Posts: 1,514 Trader Rating: (0) Feedback Score: 0 reviews	don't know if i read it or not, but what did you do to make them fit? roll? pull? spacers? c/o's do you have on there? mulltilink? __________________ R.I.P. KAIN. YOU'LL ALWAYS BE BY MY SIDE! 240 addict miata addict

12-26-2010, 06:03 PM	#82
jbretz Zilvia Addict Join Date: Oct 2008 Location: Jersey Posts: 754 Trader Rating: (6) Feedback Score: 6 reviews	hows the tire wear? i love the stance and everything about the vert for some reason. __________________

12-21-2010, 01:15 PM	#61
Couped_up'd Zilvia FREAK! Join Date: Feb 2009 Location: Candy Mountain Posts: 1,119 Trader Rating: (47) Feedback Score: 47 reviews	Your engine bay is what japan should have sent us.

12-21-2010, 01:32 PM	#62
Sideways_blksr20 Nissanaholic! Join Date: Oct 2008 Location: Tustin Age: 37 Posts: 1,667 Trader Rating: (38) Feedback Score: 38 reviews	Are you using the stock KA Ecu?? What did you use to tune it for the injectors and maf??

12-21-2010, 01:40 PM	#63
fckillerbee Post Whore! Join Date: Nov 2007 Location: Southern California Age: 39 Posts: 4,266 Trader Rating: (5) Feedback Score: 5 reviews	i'm sorry..i noticed you said something about formula d season.... you plan to compete in this car?

12-21-2010, 02:10 PM	#65
Highway Riding Zilvia Addict Join Date: Feb 2010 Location: Out on the Highway! Posts: 602 Trader Rating: (1) Feedback Score: 1 reviews	Very clean looking

12-21-2010, 03:05 PM	#68
gzer750 Zilvia Member Join Date: Jun 2009 Location: l.a Posts: 172 Trader Rating: (1) Feedback Score: 1 reviews	mosdef a sick vert. post some more pics for us fellow vert guys.

12-22-2010, 12:16 AM	#72
98_240sx_se Leaky Injector Join Date: Mar 2008 Location: eureka, ca Age: 36 Posts: 126 Trader Rating: (4) Feedback Score: 4 reviews	very clean matt. i like your rear bumper. which one is it, looks similar to the rocket bunny one..

12-23-2010, 11:56 AM	#75
ixfxi Post Whore! Join Date: Apr 2006 Location: bangin on my chest Account: BANNED #fucksupreme Age: 82 Posts: 5,932 Trader Rating: (3) Feedback Score: 3 reviews	INSTANT GENTLEMAN jesus

12-23-2010, 12:00 PM	#76
s14freak93901 Zilvia Member Join Date: Apr 2005 Location: salinas,ca-fort bragg,nc Age: 35 Posts: 203 Trader Rating: (0) Feedback Score: 0 reviews	thats a damn clean KA-T setup.

12-25-2010, 03:08 PM	#77
98_240sx_se Leaky Injector Join Date: Mar 2008 Location: eureka, ca Age: 36 Posts: 126 Trader Rating: (4) Feedback Score: 4 reviews	hmm interesting, i have never seen/heard of one before

12-26-2010, 11:16 PM	#83
Houseof1817 Zilvia Junkie Join Date: Apr 2010 Location: AR Posts: 300 Trader Rating: (4) Feedback Score: 4 reviews	Probably not too bad, that is if you are away from the drudgery of the highway and clutch kicks. __________________ http://garagemakeshift.blogspot.com/

12-26-2010, 11:23 PM	#84
matts13vert Zilvia FREAK! Join Date: May 2009 Location: Long Beach Age: 32 Posts: 1,202 Trader Rating: (31) Feedback Score: 31 reviews	My rear dz101's are almost bald on 1" of the inside tread, they lasted from sept '10 til now. Ive gone thru many fronts, not because of wear but because I kept changing my sizing but honestly to me its not that bad. And I drive my car ALOT, it's my only car and daily driven. __________________ VISIT OUR NEW SITE! streetfaction.net

12-26-2010, 11:41 PM	#85
spooled240 Post Whore! Join Date: Mar 2008 Location: San Diego, CA Posts: 4,203 Trader Rating: (27) Feedback Score: 27 reviews	it's amazing how good those wheels look lol

12-27-2010, 03:37 AM	#86
Razi Zilvia Addict Join Date: Apr 2007 Location: Corona Posts: 630 Trader Rating: (12) Feedback Score: 12 reviews	The shine will blow you away in person haha. Matt, did the KA MAF bolt right up to the SR intake? I might be picking up an SR box soon. I also just bought an SR manifold. Dun dun dun....

12-27-2010, 04:03 AM	#88
Ceepo Nissanaholic! Join Date: Jan 2008 Location: Cedar City, Utah Posts: 2,007 Trader Rating: (9) Rides Gallery: Ceepo Feedback Score: 9 reviews	I really dig this car, its looks fantastic, keep it up __________________ TW: http://zilvia.net/f/cars-sale/390459...d9s-coils.html

12-27-2010, 04:05 AM	#89
Razi Zilvia Addict Join Date: Apr 2007 Location: Corona Posts: 630 Trader Rating: (12) Feedback Score: 12 reviews	Nice looking clean dude! Is it close to being done? Mine feels really good. Last week, I unhooked the swirl valve's vacuum hose so the butterflys always stay open and now the boost comes on nice and smooth.

12-27-2010, 04:18 AM	#90
yetijeff Zilvia Addict Join Date: Sep 2010 Location: Corona Ca Age: 34 Posts: 765 Trader Rating: (3) Feedback Score: 3 reviews	looks really clean! good work. are u not running a bov? or am i blind