s15 to s13 side skirts

[KAT-PWR]

Start with your OEM s15 side skirt ($100 )

Cut about 3in out a ways back from the front to leave the locking mechanism intact...obviously

I used a dremel for this. The most important part when it come to bodywork is to create a V shaped valley

I used epoxy to meld the two pieces together, i put the epoxy in the back of the cut then put the section i cut out in with epoxy for added strength
Feather that shit out

Hey look it fits pretty good although the front sections is a bit longer than stock s13 fenders


The rear also needs a little spacer. deal with it or do some tricky body work